Predictive control co-design for enhancing flexibility in residential housing with battery degradation

Buildings are responsible for about a quarter of global energy-related CO2 emissions. Consequently, the decarbonisation of the housing stock is essential in achieving net-zero carbon emissions. Global decarbonisation targets can be achieved through increased efficiency in using energy generated by intermittent resources. The paper presents a co-design framework for simultaneous optimal design and operation of residential buildings using Model Predictive Control (MPC). The framework is capable of explicitly taking into account operational constraints and pushing the system to its efficiency and performance limits in an integrated fashion. The optimality criterion minimises system cost considering time-varying electricity prices and battery degradation. A case study illustrates the potential of co-design in enhancing flexibility and self-sufficiency of a system operating under different conditions. Specifically, numerical results from a low-fidelity model show substantial carbon emission reduction and bill savings compared to an a-priori sizing approach

Analysis of surface waves generated on subwavelength-structured silver films

Using transmission electron microscopy (TEM) to analyse the physical-chemical surface properties of subwavlength structured silver films and finite-difference time-domain (FDTD) numerical simulations of the optical response of these structures to plane-wave excitation, we report on the origin and nature of the persistent surface waves generated by a single slit-groove motif and recently measured by far-field optical interferometry. The surface analysis shows that the silver films are free of detectable oxide or sulfide contaminants, and the numerical simulations show very good agreement with the results previously reported.Comment: 9 Figure

Efficiency in nanostructured thermionic and thermoelectric devices

Advances in solid-state device design now allow the spectrum of transmitted electrons in thermionic and thermoelectric devices to be engineered in ways that were not previously possible. Here we show that the shape of the electron energy spectrum in these devices has a significant impact on their performance. We distinguish between traditional thermionic devices where electron momentum is filtered in the direction of transport only and a second type, in which the electron filtering occurs according to total electron momentum. Such 'total momentum filtered' kr thermionic devices could potentially be implemented in, for example, quantum dot superlattices. It is shown that whilst total momentum filtered thermionic devices may achieve efficiency equal to the Carnot value, traditional thermionic devices are limited to efficiency below this. Our second main result is that the electronic efficiency of a device is not only improved by reducing the width of the transmission filter as has previously been shown, but also strongly depends on whether the transmission probability rises sharply from zero to full transmission. The benefit of increasing efficiency through a sharply rising transmission probability is that it can be achieved without sacrificing device power, in contrast to the use of a narrow transmission filter which can greatly reduce power. We show that devices which have a sharply-rising transmission probability significantly outperform those which do not and it is shown such transmission probabilities may be achieved with practical single and multibarrier devices. Finally, we comment on the implications of the effect the shape of the electron energy spectrum on the efficiency of thermoelectric devices.Comment: 11 pages, 15 figure

Charge injection instability in perfect insulators

We show that in a macroscopic perfect insulator, charge injection at a field-enhancing defect is associated with an instability of the insulating state or with bistability of the insulating and the charged state. The effect of a nonlinear carrier mobility is emphasized. The formation of the charged state is governed by two different processes with clearly separated time scales. First, due to a fast growth of a charge-injection mode, a localized charge cloud forms near the injecting defect (or contact). Charge injection stops when the field enhancement is screened below criticality. Secondly, the charge slowly redistributes in the bulk. The linear instability mechanism and the final charged steady state are discussed for a simple model and for cylindrical and spherical geometries. The theory explains an experimentally observed increase of the critical electric field with decreasing size of the injecting contact. Numerical results are presented for dc and ac biased insulators.Comment: Revtex, 7pages, 4 ps figure

A seed-diffusion model for tropical tree diversity patterns

Diversity patterns of tree species in a tropical forest community are approached by a simple lattice model and investigated by Monte Carlo simulations using a backtracking method. Our spatially explicit neutral model is based on a simple statistical physics process, namely the diffusion of seeds. The model has three parameters: the speciation rate, the size of the meta-community in which the studied tree-community is embedded, and the average surviving time of the seeds. By extensive computer simulations we aim the reproduction of relevant statistical measures derived from the experimental data of the Barro Colorado Island tree census in year 1995. The first two parameters of the model are fixed to known values, characteristic of the studied community, thus obtaining a model with only one freely adjustable parameter. As a result of this, the average number of species in the considered territory, the relative species abundance distribution, the species-area relationship and the spatial auto-correlation function of the individuals in abundant species are simultaneously fitted with only one parameter which is the average surviving time of the seeds.Comment: 12 pages, 5 figure

Measuring Temperature Gradients over Nanometer Length Scales

When a quantum dot is subjected to a thermal gradient, the temperature of electrons entering the dot can be determined from the dot's thermocurrent if the conductance spectrum and background temperature are known. We demonstrate this technique by measuring the temperature difference across a 15 nm quantum dot embedded in a nanowire. This technique can be used when the dot's energy states are separated by many kT and will enable future quantitative investigations of electron-phonon interaction, nonlinear thermoelectric effects, and the effciency of thermoelectric energy conversion in quantum dots.Comment: 6 pages, 5 figure

Hard X-ray Emission Associated with White Dwarfs

We have used the WGACAT to search for hard X-ray sources associated with white dwarfs (WDs) from the catalog of McCook & Sion (1999). We find 17 X-ray sources coincident with WDs showing significant hard X-ray emission at energies >0.5 keV. Twelve of these WDs are in known binary systems, in two of which the accretion of the close companion's material onto the white dwarf produces the hard X-ray emission, and in the other ten of which the late-type companions' coronal activity emits hard X-rays. One WD is projected near an AGN which is responsible for the hard X-ray emission. The remaining four WDs and two additional white dwarfs with hard X-ray emission appear single. The lack of near-IR excess from the apparently single WDs suggests that either X-ray observations are more effective than near-IR photometry in diagnosing faint companions or a different emission mechanism is needed. It is intriguing that 50% of the six apparently single WDs with hard X-ray emission are among the hottest WDs. We have compared X-ray properties of 11 hot WDs with different spectral types, and conclude that stellar pulsation and fast stellar winds are not likely the origin of the hard X-ray emission, but a leakage of the high-energy Wien tail of emission from deep in the stellar atmosphere remains a tantalizing source of hard X-ray emission from hot DO and DQZO WDs. (This abstract is an abridged version.)Comment: 35 pages, 8 figures, 4 tables, accepted for publication in AJ, April issu