1,397 research outputs found
Coating thermal noise for arbitrary shaped beams
Advanced LIGO's sensitivity will be limited by coating noise. Though this
noise depends on beam shape, and though nongaussian beams are being seriously
considered for advanced LIGO, no published analysis exists to compare the
quantitative thermal noise improvement alternate beams offer. In this paper, we
derive and discuss a simple integral which completely characterizes the
dependence of coating thermal noise on shape. The derivation used applies
equally well, with minor modifications, to all other forms of thermal noise in
the low-frequency limit.Comment: 3 pages. Originally performed in August 2004. Submitted to CQG. (v2)
: Corrections from referee and other
Systematic challenges for future gravitational wave measurements of precessing binary black holes
The properties of precessing, coalescing binary black holes are presently
inferred through comparison with two approximate models of compact binary
coalescence. In this work we show these two models often disagree substantially
when binaries have modestly large spins () and modest mass ratios
(). We demonstrate these disagreements using standard figures of
merit and the parameters inferred for recent detections of binary black holes.
By comparing to numerical relativity, we confirm these disagreements reflect
systematic errors. We provide concrete examples to demonstrate that these
systematic errors can significantly impact inferences about astrophysically
significant binary parameters. For the immediate future, parameter inference
for binary black holes should be performed with multiple models (including
numerical relativity), and carefully validated by performing inference under
controlled circumstances with similar synthetic events.Comment: 12 pages, 9 figure
The dependence of test-mass thermal noises on beam shape in gravitational-wave interferometers
In second-generation, ground-based interferometric gravitational-wave
detectors such as Advanced LIGO, the dominant noise at frequencies
Hz to Hz is expected to be due to thermal fluctuations in the
mirrors' substrates and coatings which induce random fluctuations in the shape
of the mirror face. The laser-light beam averages over these fluctuations; the
larger the beam and the flatter its light-power distribution, the better the
averaging and the lower the resulting thermal noise. In semi-infinite mirrors,
scaling laws for the influence of beam shape on the four dominant types of
thermal noise (coating Brownian, coating thermoelastic, substrate Brownian, and
substrate thermoelastic) have been suggested by various researchers and derived
with varying degrees of rigour. Because these scaling laws are important tools
for current research on optimizing the beam shape, it is important to firm up
our understanding of them. This paper (1) gives a summary of the prior work and
of gaps in the prior analyses, (2) gives a unified and rigorous derivation of
all four scaling laws, and (3) explores, relying on work by J. Agresti,
deviations from the scaling laws due to finite mirror size.Comment: 25 pages, 10 figures, submitted to Class. Quantum Gra
Post-1995 French cinema: return of the social, return of the political?
A key trend in post-1995 French cinema has been the return of the social. Analysing this trend, this article seeks to evaluate its politic impact. Using Hervé Le Roux’s Reprise (1997) and Agnès Varda’s Les Glaneurs et la glaneuse (2000) as key meta-texts, it suggests that the current wave of politically engaged cinema needs to be approached in new ways that recognise how films trace the impact of a politically unmediated, ‘raw’ real on groups or individuals. It further suggests that the withdrawal of political mediation gives the films an essential ambiguity and a melodramatic quality that, rather than mere cliché, may be a privileged way to engage with the violence of the real. Film is now not so much in the van but dans le bain of a diverse socio-political stirring
The Slowly Formed Guiselin Brush
We study polymer layers formed by irreversible adsorption from a polymer
melt. Our theory describes an experiment which is a ``slow'' version of that
proposed by Guiselin [Europhys. Lett., v. 17 (1992) p. 225] who considered
instantaneously irreversibly adsorbing chains and predicted a universal density
profile of the layer after swelling with solvent to produce the ``Guiselin
brush.'' Here we ask what happens when adsorption is not instantaneous. The
classic example is chemisorption. In this case the brush is formed slowly and
the final structure depends on the experiment's duration, . We find
the swollen layer consists of an inner region of thickness with approximately constant density and an outer region
extending up to height which has the same density decay as for the Guiselin case.Comment: 7 pages, submitted to Europhysics Letter
Evaporating hydrophilic and superhydrophobic droplets in electric fields
Evaporating water droplets on a heated substrate are investigated in this work. Specifically, the influences of electric fields are studied in the context of the heat flux distribution beneath the droplets as well as the droplet mechanics and resulting shapes and forces. To facilitate a deeper understanding of the problem, both hydrophilic and superhydrophobic droplets are considered for an entire evaporation period with and without electric field effects. Both wetting scenarios show that the net radial directed electric force is directed inward, resulting in a compressive force which influences the droplet shape in such a way that it appears elongated. Conversely, the net vertically directed electric force is determined to be downwardly directed for hydrophilic droplets, pressing the droplet to the surface, whereas it is upwardly directed for the superhydrophobic droplets, representing a lifting force. With regard to the heat transfer to the droplets, only a pronounced electric field effect was observed for the superhydrophobic droplet. For all droplets, the contact line density, representing the ratio of the contact line perimeter to the total base area of the droplet, is determined to be a parameter that unifies the average heat flux from the heater to the droplets. This suggests that the heat transfer to the base of the droplet in the presence of an electric field is dominated by the electric fields influence, or lack thereof, on the contact line density
Effects of FSH on testicular mRNA transcript levels in the hypogonadal mouse
FSH acts through the Sertoli cell to ensure normal testicular development and function. To identify transcriptional mechanisms through which FSH acts in the testis, we have treated gonadotrophin-deficient hypogonadal (hpg) mice with recombinant FSH and measured changes in testicular transcript levels using microarrays and real-time PCR 12, 24 and 72 h after the start of treatment. Approximately 400 transcripts were significantly altered at each time point by FSH treatment. At 12 h, there was a clear increase in the levels of a number of known Sertoli cell transcripts (e.g. Fabp5, Lgals1, Tesc, Scara5, Aqp5). Additionally, levels of Leydig cell transcripts were also markedly increased (e.g. Ren1, Cyp17a1, Akr1b7, Star, Nr4a1). This was associated with a small but significant rise in testosterone at 24 and 72 h. At 24 h, androgen-dependent Sertoli cell transcripts were up-regulated (e.g. Rhox5, Drd4, Spinlw1, Tubb3 and Tsx) and this trend continued up to 72 h. By contrast with the somatic cells, only five germ cell transcripts (Dkkl1, Hdc, Pou5f1, Zfp541 and 1700021K02Rik) were altered by FSH within the time-course of the experiment. Analysis of canonical pathways showed that FSH induced a general decline in transcripts related to formation and regulation of tight junctions. Results show that FSH acts directly and indirectly to induce rapid changes in Sertoli cell and Leydig cell transcript levels in the hpg mouse but that effects on germ cell development must occur over a longer time-span
Attitudes and barriers to incident reporting: a collaborative hospital study
Copyright © 2006 by the BMJ Publishing Group Ltd.ObjectivesTo assess awareness and use of the current incident reporting system and to identify factors inhibiting reporting of incidents in hospitals.Design, setting and participantsAnonymous survey of 186 doctors and 587 nurses from diverse clinical settings in six South Australian hospitals (response rate = 70.7% and 73.6%, respectively).Main outcome measuresKnowledge and use of the current reporting system; barriers to incident reporting.ResultsMost doctors and nurses (98.3%) were aware that their hospital had an incident reporting system. Nurses were more likely than doctors to know how to access a report (88.3% v 43.0%; relative risk (RR) 2.05, 95% CI 1.61 to 2.63), to have ever completed a report (89.2% v 64.4%; RR 1.38, 95% CI 1.19 to 1.61), and to know what to do with the completed report (81.9% v 49.7%; RR 1.65, 95% CI 1.27 to 2.13). Staff were more likely to report incidents which are habitually reported, often witnessed, and usually associated with immediate outcomes such as patient falls and medication errors requiring corrective treatment. Near misses and incidents which occur over time such as pressure ulcers and DVT due to inadequate prophylaxis were least likely to be reported. The most frequently stated barrier to reporting for doctors and nurses was lack of feedback (57.7% and 61.8% agreeing, respectively).ConclusionsBoth doctors and nurses believe they should report most incidents, but nurses do so more frequently than doctors. To improve incident reporting, especially among doctors, clarification is needed of which incidents should be reported, the process needs to be simplified, and feedback given to reporters.S M Evans, J G Berry, B J Smith, A Esterman, P Selim, J O’Shaughnessy, M DeWi
Compact Binary Coalescences in the Band of Ground-based Gravitational-Wave Detectors
As the ground-based gravitational-wave telescopes LIGO, Virgo, and GEO 600
approach the era of first detections, we review the current knowledge of the
coalescence rates and the mass and spin distributions of merging neutron-star
and black-hole binaries. We emphasize the bi-directional connection between
gravitational-wave astronomy and conventional astrophysics. Astrophysical input
will make possible informed decisions about optimal detector configurations and
search techniques. Meanwhile, rate upper limits, detected merger rates, and the
distribution of masses and spins measured by gravitational-wave searches will
constrain astrophysical parameters through comparisons with astrophysical
models. Future developments necessary to the success of gravitational-wave
astronomy are discussed.Comment: Replaced with version accepted by CQG
- …