154 research outputs found

    Group IV functionalization of low index waveguides

    No full text
    Low fabrication error sensitivity, integration density, channel scalability, low switching energy and low insertion loss are the major prerequisites for future on-chip WDM systems and interfacing with optical fibres. A number of device geometries have already been demonstrated that fulfil these criteria, at least in part, but combining all of the requirements is still a difficult challenge.Two contenders that could fulfil these criteria are the low loss nitride waveguiding platform and the high index group IV compounds for active photonic devices. Silicon Oxynitride (SiON) and Silicon Nitride (SiN) based waveguides are extremely powerful and central to today’s optical communications networks. The intermediate refractive index provides low footprint devices but eases the fabrication demands that can result in phase errors and repeatability problems in the all silicon approach. This enables multiplexers and demultiplexers with very low crosstalk and insertion loss and extremely low loss long range waveguides, making them very attractive for the optical backplanes and rack to rack links inside supercomputers and data centers. Group IV Photonics GeSi has a number of attractive optical characteristics for modulation, absorption and detection in a small volume area enabling low power and high density integration.Here, we propose and demonstrate a novel architecture consisting of the interfacing of a range of deposition method using low temperature PECVD and HWCVD nitride waveguides, Photonic crystal modulators [1] but also detectors [2] connected by a silicon nitride bus waveguide. The architecture features very high scalability due to the small size of the devices (~100 micrometre square) and the modulators operate with an AC energy consumption of less than 1fJ/bit

    Optimizing band-edge slow light in silicon-on-insulator waveguide gratings

    Get PDF
    A systematic analysis of photonic bands and group index in silicon grating waveguides is performed, in order to optimize band-edge slow-light behavior in integrated structures with low losses. A combination of numerical methods and perturbation theory is adopted. It is shown that a substantial increase of slow light bandwidth is achieved when decreasing the internal width of the waveguide and the silicon thickness in the cladding region. It is also observed that a reduction of the internal width does not undermine the performance of an adiabatic taper

    Tunable delay lines in silicon photonics: coupled resonators and photonic crystals, a comparison

    Get PDF
    In this paper, we report a direct comparison between coupled resonator optical waveguides (CROWs) and photonic crystal waveguides (PhCWs), which have both been exploited as tunable delay lines. The two structures were fabricated on the same silicon-on-insulator (SOI) technological platform, with the same fabrication facilities and evaluated under the same signal bit-rate conditions. We compare the frequency- and time-domain response of the two structures; the physical mechanism underlying the tuning of the delay; the main limits induced by loss, dispersion, and structural disorder; and the impact of CROW and PhCW tunable delay lines on the transmission of data stream intensity and phase modulated up to 100 Gb/s. The main result of this study is that, in the considered domain of applications, CROWs and PhCWs behave much more similarly than one would expect. At data rates around 100 Gb/s, CROWs and PhCWs can be placed in competition. Lower data rates, where longer absolute delays are required and propagation loss becomes a critical issue, are the preferred domain of CROWs fabricated with large ring resonators, while at data rates in the terabit range, PhCWs remain the leading technology

    Hydrogen induced optically-active defects in silicon photonic nanocavities

    Get PDF
    This work was supported by Era-NET NanoSci LECSIN project coordinated by F. Priolo, by the Italian Ministry of University and Research, FIRB contract No. RBAP06L4S5 and by the EPSRC UKSp project. Partial financial support by the Norwegian Research Council is also acknowledged.We demonstrate intense room temperature photoluminescence (PL) from optically active hydrogen- related defects incorporated into crystalline silicon. Hydrogen was incorporated into the device layer of a silicon on insulator (SOI) wafer by two methods: hydrogen plasma treatment and ion implantation. The room temperature PL spectra show two broad PL bands centered at 1300 and 1500 nm wavelengths: the first one relates to implanted defects while the other band mainly relates to the plasma treatment. Structural characterization reveals the presence of nanometric platelets and bubbles and we attribute different features of the emission spectrum to the presence of these different kind of defects. The emission is further enhanced by introducing defects into photonic crystal (PhC) nanocavities. Transmission electron microscopy analyses revealed that the isotropicity of plasma treatment causes the formation of a higher defects density around the whole cavity compared to the ion implantation technique, while ion implantation creates a lower density of defects embedded in the Si layer, resulting in a higher PL enhancement. These results further increase the understanding of the nature of optically active hydrogen defects and their relation with the observed photoluminescence, which will ultimately lead to the development of intense and tunable crystalline silicon light sources at room temperature.Publisher PDFPeer reviewe

    Locally erasable couplers for optical device testing in silicon on insulator

    No full text
    Wafer scale testing is critical to reducing production costs and increasing production yield. Here we report a method that allows testing of individual optical components within a complex optical integrated circuit. The method is based on diffractive grating couplers, fabricated using lattice damage induced by ion implantation of germanium. These gratings can be erased via localised laser annealing, which is shown to reduce the outcoupling efficiency by over 20 dB after the device testing is completed. Laser annealing was achieved by employing a CW laser, operating at visible wavelengths thus reducing equipment costs and allowing annealing through thick oxide claddings. The process used also retains CMOS compatibility

    Model of thermo-optic nonlinear dynamics of photonic crystal cavities

    Get PDF
    The wavelength scale confinement of light offered by photonic crystal (PhC) cavities is one of the fundamental features on which many important on-chip photonic components are based, opening silicon photonics to a wide range of applications from telecommunications to sensing. This trapping of light in a small space also greatly enhances optical nonlinearities and many potential applications build on these enhanced light-matter interactions. In order to use PhCs effectively for this purpose it is necessary to fully understand the nonlinear dynamics underlying PhC resonators. In this work, we derive a first principles thermal model outlining the nonlinear dynamics of optically pumped silicon two-dimensional (2D) PhC cavities by calculating the temperature distribution in the system in both time and space. We demonstrate that our model matches experimental results well and use it to describe the behavior of different types of PhC cavity designs. Thus, we demonstrate the model's capability to predict thermal nonlinearities of arbitrary 2D PhC microcavities in any material, only by substituting the appropriate physical constants. This renders the model critical for the development of nonlinear optical devices prior to fabrication and characterization

    Single-mode interband cascade laser with a slotted waveguide

    Get PDF
    The design of a single-mode interband cascade laser (ICL) using a slotted waveguide is presented. This technique was explored as an inexpensive alternative to distributed feedback lasers since standard photolithography can be used in fabrication and complex techniques, such as e-beam lithography, re-growth steps, and/or metal gratings, can be avoided. The design of slotted waveguides must be carefully simulated before fabrication to ensure the efficacy of the photolithography masks with each ICL growth. Limitations and the behavior of key design parameters are discussed. Single-mode emission was achieved for certain temperature and injected current conditions, validating the operation of an Sb based slotted laser. The slotted ICLs were emitting from a single longitudinal mode at 3.5 μm and 2 mW of power per facet output at 20 °C with threshold currents around 80 mA

    Germanium implanted Bragg gratings in silicon on insulator waveguides

    Get PDF
    Integrated Bragg gratings are an interesting candidate for waveguide coupling, telecommunication applications, and for the fabrication of integrated photonic sensors. These devices have a high potential for optical integration and are compatible with CMOS processing techniques if compared to their optical fibre counterpart. In this work we present design, fabrication, and testing of Germanium ion implanted Bragg gratings in silicon on insulator (SOI). A periodic refractive index modulation is produced in a 1μm wide SOI rib waveguide by implanting Germanium ions through an SiO2 hardmask. The implantation conditions have been analysed by 3D ion implantation modelling and the induced refractive index change has been investigated on implanted samples by Rutherford Backscattering Spectroscopy (RBS) and ellipsometry analysis. An extinction ratio of up to 30dB in transmission, around the 1.55μm wavelength, has been demonstrated for Germanium implanted gratings on SOI waveguides.</p

    Carrier and refractive index dynamics in core-shell nanolasers grown on silicon during spontaneous and stimulated emission

    Get PDF
    In this work, we experimentally study the carrier and refractive index dynamics of InGaAs nanopillar grown on a Si on insulator (SOI) substrate. The recombination process of the InGaAs NP is characterized with different optical techniques. Temperature dependent photoluminescence (PL) at 0.5mW excitation power is carried out to determine the influence of temperature on carrier dynamics. The radiative recombination lifetime has been studied at 7K from time-resolved photoluminescence (TRPL) experiments at a certain excitation power. The optimal combination of pitch (separation between NPs) and diameter in the growth process of this nanostructure has also been measured. These results will contribute to further optimization of the InGaAs nanolaser for integration of III-V optoelectronics on SOI substrates

    Microlens-aided focusing of linearly and azimuthally polarized laser light

    Get PDF
    Funding: Russian Foundation for Basic Research (RFBR) (14-29-07133, 14-07-97039, 15-07-01174, 15-47-02492, 15-37-20723, 16-07-00990, 16-47-630483); Ministry of Education and Science of the Russian Federation (NSh-4128.2016.9, MK-9019.2016.2); European Research Council (337508).We have investigated a four-Sector transmission Polarization Converter (4-SPC) for a wavelength of 633 nm, that enables the conversion of a linearly polarized incident beam into a mixture of linearly and azimuthally polarized beams. It was numerically shown that by placing a Fresnel zone plate of focal length 532 nm immediately after the 4-SPC, the incident light can be focused into an oblong subwavelength focal spot whose size is smaller than the diffraction limit (with width and breadth, respectively, measuring FWHM = 0.28λ and FWHM = 0.45λ, where λ is the incident wavelength and FWHM stands for full-width at half maximum of the intensity). After passing through the 4-SPC, light propagates in free space over a distance of 300 μm before being focused by a Fresnel zone plate (ZP), resulting in focal spot measuring 0.42λ and 0.81λ. The focal spot was measured by a near-field microscope SNOM, and the transverse E-field component of the focal spot was calculated to be 0.42λ and 0.59λ. This numerical result was verified experimentally, giving a focal spot of smaller and larger size, respectively, measuring 0.46λ and 0.57λ. To our knowledge, this is the first implementation of polarization conversion and subwavelength focusing of light using a pair of transmission micro-optic elements.PostprintPeer reviewe
    corecore