Probing the interfacial and sub-surface structure of Si/Si1 – xGex multilayers

The ability to determine structural and compositional information from the sub-surface region of a semiconductor material has been demonstrated using a new time-of-flight medium energy ion scattering spectroscopy (ToF-MEISS) system. A series of silicon–silicon/germanium (Si/Si1 – xGex) heterostructure and multilayer samples, grown using both solid source molecular beam epitaxy (MBE) and gas source chemical vapor deposition (CVD) on Si(100) substrates, have been investigated. These data indicate that each individual layer of Si1 – xGex (x ~ 0.22) in both two- and three-period samples, can be uniquely identified with a resolution of approximately 3 nm. A comparison of MBE and CVD grown samples has also been made using layers with similar structures and composition. The total Ge content of each sample was confirmed using conventional Rutherford backscattering spectrometry

Predictors of the successful outcome of one-year survivors of coronary artery bypass surgery

This study was conducted on a South African cohort to establish the actors that may predict the successful outcome of coronary artery bypass surgery when assessed in terms of improved quality of life one year after the surgery. Information was sought on the socio-economic status of patients, their risk-factor profiles and clinical history. From the patient files, information was recorded on left ventricular ejection fraction, number of vessels bypassed, bypass time, and aortic cross-clamp time. The characteristics that were predictive of a successful outcome one year after surgery were identified. Patients in this study represented a high-risk population with multiple risk factors (obese, heavy smokers, hypertensive, hypercholesterolaemic, inactive, family history of heart disease, diabetes, and regular intake of alcohol). Measured medical parameters could not distinguish between the group with an improved quality of life and the group who did not have improved quality of life. One year after CABG all patients with an improved quality of life were men. The additional identified predictor variables for a successful outcome were: being married, patients' height, the knowledge that smoking affects the cardiovascular system, number of years that sporting activities were stopped prior to CABG surgery, a better quality sex life after the operation, acceptance of self-responsibility for rehabilitation, and the spouse knowing the diet the patient should follow. The predictors of a successful outcome at the time of the operation were: being married (OR = 22.6; p = 0.02); taller than 170 cm (OR = 15.5; p = 0.01); stopped all sporting activities for a period less than 20 years prior to their surgery (OR 11.4; p = 0.01). We concluded that the outcome of coronary artery bypass surgery could not be predicted on the basis of a medical model that considers exclusively the extent of the patient's disease and associated co-morbidities. Patients should be carefully selected and an intensive post-operative educational intervention should be provided to patients and their spouses/caregivers

The structure of epitaxial V2O3 films and their surfaces : a medium energy ion scattering study

Medium energy ion scattering, using 100 keV H+ incident ions, has been used to investigate the growth of epitaxial films, up to thicknesses of ~200 Å, of V2O3 on both Pd(111) and Au(111). Scattered-ion energy spectra provide a measure of the average film thickness and the variations in this thickness, and show that, with suitable annealing, the crystalline quality is good. Plots of the scattering yield as a function of scattering angle, so-called blocking curves, have been measured for two different incidence directions and have been used to determine the surface structure. Specifically, scattering simulations for a range of different model structures show poor agreement with experiment for half-metal (….V’O3V) and vanadyl (….V’O3V=O) terminations, with and without surface interlayer relaxations. However, good agreement with experiment is found for the modified oxygen-termination structure, first proposed by Kresse et al., in which a subsurface V half-metal layer is moved up into the outermost V buckled metal layer to produce a VO2 overlayer on the underlying V2O3, with an associated layer structure of ….O3VV’’V’O3

Coexistence of ferromagnetism and superconductivity in the hybrid ruthenate-cuprate compound RuSr_2GdCu_2O_8 studied by muon spin rotation (\mu SR) and DC-magnetization

We have investigated the magnetic and the superconducting properties of the hybrid ruthenate-cuprate compound RuSr_{2}GdCu_{2}O_{8} by means of zero-field muon spin rotation- (ZF-$\mu$SR) and DC magnetization measurements. The DC-magnetisation data establish that this material exhibits ferromagnetic order of the Ru-moments ($\mu (Ru) \approx 1 \mu_{B}$) below T_{Curie} = 133 K and becomes superconducting at a much lower temperature T_c = 16 K. The ZF-$\mu$SR experiments indicate that the ferromagnetic phase is homogeneous on a microscopic scale and accounts for most of the sample volume. They also suggest that the magnetic order is not significantly modified at the onset of superconductivity.Comment: improved version submitted to Phys. Rev.

Invariant higher-order variational problems II

Motivated by applications in computational anatomy, we consider a second-order problem in the calculus of variations on object manifolds that are acted upon by Lie groups of smooth invertible transformations. This problem leads to solution curves known as Riemannian cubics on object manifolds that are endowed with normal metrics. The prime examples of such object manifolds are the symmetric spaces. We characterize the class of cubics on object manifolds that can be lifted horizontally to cubics on the group of transformations. Conversely, we show that certain types of non-horizontal geodesics on the group of transformations project to cubics. Finally, we apply second-order Lagrange--Poincar\'e reduction to the problem of Riemannian cubics on the group of transformations. This leads to a reduced form of the equations that reveals the obstruction for the projection of a cubic on a transformation group to again be a cubic on its object manifold.Comment: 40 pages, 1 figure. First version -- comments welcome

Damage profiles of ultrashallow B implants in Si and the Kinchin-Pease relationship

Damage distributions resulting from 0.1-2 keV B+ implantation at room temperature into Si(100) to doses ranging from 1×1014 to 2×1016 cm-2 have been determined using high-depth-resolution medium-energy-ion scattering in the double alignment mode. For all B+ doses and energies investigated a 3-4 nm deep, near-surface damage peak was observed while for energies at and above 1 keV, a second damage peak developed beyond the mean projected B+ ion range of 5.3 nm. This dual damage peak structure is due to dynamic annealing processes. For the near-surface peak it is observed that, at the lowest implant energies and doses used, for which recombination processes are suppressed due to the proximity of the surface capturing interstitials, the value of the damage production yield for low-mass B+ ions is equal or greater than the modified Kinchin-Pease model predictions [G. H. Kinchin and R. S. Pease, Rep. Prog. Phys. 18, 1 (1955); G. H. Kinchin and R. S. Pease, J. Nucl. Energy 1, 200 (1955); P. Sigmund, Appl. Phys. Lett. 14, 114 (1969)]

The influence of CO adsorption on the surface composition of cobalt/palladium alloys

AM is grateful for funding from SASOL Technology UK Ltd (PhD studentship); JG is grateful for the award of a fellowship from the Knut and Alice Wallenberg Foundation. TEJ and AGT acknowledge EPSRC funding of postdoctoral research (EP/E047580/1). The MEIS facility was funded via EPSRC grant EP/E003370/1.Segregation induced by the adsorption of gas phase species can strongly influence the composition of bimetallic surfaces and can therefore play an important role in influencing heterogeneous catalytic reactions. The addition of palladium to cobalt catalysts has been shown to promote Fischer Tropsch catalysis. We investigate the adsorption of CO onto bimetallic CoPd surfaces on Pd{111} using a combination of reflection absorption infrared spectroscopy and medium energy ion scattering. The vibrational frequency of adsorbed CO provides crucial information on the adsorption sites adopted by CO and medium energy ion scattering probes the surface composition before and after CO exposure. We show that cobalt segregation is induced by CO adsorption and rationalise these observations in terms of the strength of adsorption of CO in various surface adsorption sites.PostprintPeer reviewe

Correction to: Effectiveness of a new model of primary care management on knee pain and function in patients with knee osteoarthritis: Protocol for THE PARTNER STUDY

After the publication of this protocol [1], our collaborator Prima Health solutions advised us of their intent to withdraw from the study. Their primary role was to provide remotely delivered weight-loss services (via the Healthy Weight for Life program) to eligible participants in the intervention group. These services were partly provided as in-kind and partly funded through the study. We have received ethical approval from the University of Sydney to replace the Healthy Weight for Life program with the Commonwealth Scientific and Industrial Research Organisation's (CSIRO) Total Wellbeing Diet. The amended weight loss advice and support paragraph of the manuscript is outlined below. All changes to the protocol were made and approved before starting the trial and were prospectively changed on our trial registration (ACT RN12617001595303). Amended weight loss advice and support paragraph: If the patient has a BMI =27 kg/m2, the patient will be offered the option of participating in the remotelydelivered weight loss program. The Australian Commonwealth Scientific and Industrial Research Organisation's (CSIRO) "Total Wellbeing Diet" is based on an evidence-based weight management strategy that utilises a structured, nutritionally balanced eating plan designed to be incorporated into a balanced lifestyle program [2, 3]. The program is a 12- week, low glycaemic index, high protein, healthy eating program with online support and tracking tools, meal plans and educational resources on a healthy diet. It is delivered by SP Health (http://www.sphealth.com/) on behalf of the CSIRO. After completion of the 12-week program, patients may elect to continue the basic program for an additional 12-weeks. Patients who elect to undertake the online weight-loss program will continue to be supported by the PARTNER Care Support Team throughout their time on the weight-loss program. This program will be undertaken in conjunction with the PARTNER exercise program and educational resources on healthy lifestyle change.

Intra-operative pneumatic tourniquet – perceptions of use and complications in the orthopaedic community of South Africa

OBJECTIVES: To assess views on use, maintenance and side-effects of the pneumatic tourniquet in the South African orthopaedic community. METHODS: A census-type questionnaire study was conducted of all 475 orthopaedic surgeons registered with the Orthopaedic Association of South Africa during 1993/94. The chi-square test was used to determine statistical significance between different groups of respondents. RESULTS: Seventy-seven per cent of the questionnaires were returned. Ninety-nine per cent of respondents used a pneumatic tourniquet. Eighty-four per cent believed that the tourniquet may damage underlying tissue both as a result of applied pressure effects and ischaemic consequences. Fifty-four per cent of respondents personally checked the calibration of the pneumatic tourniquet, although 76% of respondents believe that the apparatus needs to be checked at least once per month. More respondents who did not check the tourniquet apparatus than respondents who did check it believe that applied pressure does not cause tissue damage (P < 0.001), that the operating room technician or hospital engineer should be responsible for checking equipment (P < 0.001), and that equipment did not need to be checked more than once every 6 months (P < 0.001). CONCLUSIONS: Although most orthopaedic surgeons are aware of the pneumatic tourniquet's side-effects, a minority appear to be unaware of the hazards of excessive applied pressure alone or excessive applied pressure caused by use of faulty equipment. It needs to be emphasised to these surgeons that regular checking of the pneumatic tourniquet apparatus is necessary in order to prevent postoperative complications ascribed to use of the tourniquet

Geometric Challenges in Designing Parts for Machining using Wire-fed DED

Wire-fed DED using MIG welding systems allows for high deposition rates above 30lbs/hr, enabling much larger parts to be printed than would be possible on other DED systems. However, a drawback to this high deposition rate is a relatively low bead resolution on the printed part. Post-processing using machining is usually required on any mating surfaces printed using wire-fed DED. Problems such as residual stress in the build plate and printed part, underbuilding, and path interpolations can all lead to insufficient material deposition and deviation from the desired shape. These areas where the printed part varies from the model can leave defects on post-processed surfaces. This paper will cover common geometry issues that can arise from wire-fed DED and design changes that can be made to ensure that the printed design contains the required material to achieve the finished part.Mechanical Engineerin