The August 24, 2002 Coronal Mass Ejection: When a Western Limb Event Connects to Earth

We discuss how some coronal mass ejections (CMEs) originating from the western limb of the Sun are associated with space weather effects such as solar energetic particles (SEPs), shock or geo-effective ejecta at Earth. We focus on the August 24, 2002 coronal mass ejection, a fast (~ 2000 km/s) eruption originating from W81. Using a three-dimensional magneto-hydrodynamic simulation of this ejection with the Space Weather Modeling Framework (SWMF), we show how a realistic initiation mechanism enables us to study the deflection of the CME in the corona and the heliosphere. Reconnection of the erupting magnetic field with that of neighboring streamers and active regions modify the solar connectivity of the field lines connecting to Earth and can also partly explain the deflection of the eruption during the first tens of minutes. Comparing the results at 1 AU of our simulation with observations by the ACE spacecraft, we find that the simulated shock does not reach Earth, but has a maximum angular span of about 120$^\circ$, and reaches 35$^\circ$ West of Earth in 58 hours. We find no significant deflection of the CME and its associated shock wave in the heliosphere, and we discuss the consequences for the shock angular span.Comment: 7 pages, 4 figures, IAU 257 Symposium Proceeding

An Evaluation of CubeSat Orbital Decay Utilizing ADCS

Since the early 2000s, the number of nanosatellites launched has shown an exponential trend. As Low Earth Orbit (LEO) is getting crowded with nanosatellites and small satellites, FCC\u27s new five-year rule regulation requires space operators to plan disposal through re-entry into Earth\u27s atmosphere in no more than five years after the mission\u27s end. One was to decelerate and deorbit a satellite is by increasing the satellite drag area using active attitude control, which can be used to tactically deorbit satellites to satisfy the five-year rule . The atmospheric density in the upper atmosphere (LEO region) widely varies as a function of altitude, latitude, longitude, geomagnetic activity, solar cycle, seasons, and local time. One factor potentially within the control of the satellite operator is the drag associated with the satellite ram face. This is accomplished by controlling attitude which is especially effective for satellites with faces offering varying cross-sectional areas (e.g., 3U or 6U CubeSats). In this paper, the authors present a feasibility study of how satellite drag can be predicted and controlled by managing the satellite attitude to increase or decrease the effective cross-sectional area of a satellite in consideration of variable factors, such as altitude, inclination, geomagnetic activity, solar cycle, variations in seasons, and local time

Mapping the Structure of the Corona Using Fourier Backprojection Tomography

Estimating the structure, or density distribution, of the solar corona from a set of two-dimensional white-light images made by coronagraphs is a critical challenge in coronal physics. This work describes new data-analysis procedures which are used to create global maps of the coronal structure at heights where the corona becomes approximately radial (⩾ 3 R☉). The technique, which is named Qualitative Solar Rotational Tomography (QSRT), uses total brightness white light observations, processed with a suitable background subtraction and a Normalizing Radial Graded Filter (NRGF). These observations are made with high frequency by the Large Angle and Spectrometric Coronagraph Experiment (LASCO) C2 coronagraph, which allows a standard Fourier-transform-based tomographical reconstruction. In this paper, we first test the technique using a model corona. QSRT is then applied to a set of observations made during Carrington Rotation (CR) 2000–2001 (2003 March 16 to 2003 March 31). Since the maps are constructed from data which are normalized using the NRGF process, QSRT cannot give electron density directly. Nevertheless, the tests using the model corona demonstrate the technique\u27s ability to give a good qualitative reconstruction of the coronal structure at high latitude, with decreasing but acceptable accuracy at the equator. These tests also demonstrate QSRT\u27s insensitivity to noise. For the LASCO C2 observations, good agreement is found between synthetic images calculated from the reconstructed corona and the original observations, and good agreement is found between the distribution of density in a QSRT reconstruction and that found using a global MHD model. Despite their lack of quantitative information on absolute electron density, the resulting maps (which are constructed directly from high-resolution coronal data observed at the appropriate height), contain useful information on the distribution of density in the corona

Assessing the Constrained Harmonic Mean Method for Deriving the Kinematics of ICMEs with a Numerical Simulation

In this study we use a numerical simulation of an artificial coronal mass ejection (CME) to validate a method for calculating propagation directions and kinematical profiles of interplanetary CMEs (ICMEs). In this method observations from heliospheric images are constrained with in-situ plasma and field data at 1 AU. These data are used to convert measured ICME elongations into distance by applying the Harmonic Mean approach that assumes a spherical shape of the ICME front. We use synthetic white-light images, similar as observed by STEREO-A/HI, for three different separation angles between remote and in-situ spacecraft, of 30{\deg}, 60{\deg}, and 90{\deg}. To validate the results of the method they are compared to the apex speed profile of the modeled ICME, as obtained from a top view. This profile reflects the "true" apex kinematics since it is not affected by scattering or projection effects. In this way it is possible to determine the accuracy of the method for revealing ICME propagation directions and kinematics. We found that the direction obtained by the constrained Harmonic Mean method is not very sensitive to the separation angle (30{\deg} sep: \phi = W7; 60{\deg} sep: \phi = W12; 90{\deg} sep: \phi = W15; true dir.: E0/W0). For all three cases the derived kinematics are in a relatively good agreement with the real kinematics. The best consistency is obtained for the 30{\deg} case, while with growing separation angle the ICME speed at 1 AU is increasingly overestimated (30{\deg} sep: \Delta V_arr ~-50 km/s, 60{\deg} sep: \Delta V_arr ~+75 km/s, 90{\deg} sep: \Delta V_arr ~+125 km/s). Especially for future L4/L5 missions the 60{\deg} separation case is highly interesting in order to improve space weather forecasts.Comment: accepted for publication in Solar Physic

Sun-to-Earth Characteristics of Two Coronal Mass Ejections Interacting near 1 AU: Formation of a Complex Ejecta and Generation of a Two-Step Geomagnetic Storm

On 2012 September 30 - October 1 the Earth underwent a two-step geomagnetic storm. We examine the Sun-to-Earth characteristics of the coronal mass ejections (CMEs) responsible for the geomagnetic storm with combined heliospheric imaging and in situ observations. The first CME, which occurred on 2012 September 25, is a slow event and shows an acceleration followed by a nearly invariant speed in the whole Sun-Earth space. The second event, launched from the Sun on 2012 September 27, exhibits a quick acceleration, then a rapid deceleration and finally a nearly constant speed, a typical Sun-to-Earth propagation profile for fast CMEs \citep{liu13}. These two CMEs interacted near 1 AU as predicted by the heliospheric imaging observations and formed a complex ejecta observed at Wind, with a shock inside that enhanced the pre-existing southward magnetic field. Reconstruction of the complex ejecta with the in situ data indicates an overall left-handed flux rope-like configuration, with an embedded concave-outward shock front, a maximum magnetic field strength deviating from the flux rope axis and convex-outward field lines ahead of the shock. While the reconstruction results are consistent with the picture of CME-CME interactions, a magnetic cloud-like structure without clear signs of CME interactions \citep{lugaz14} is anticipated when the merging process is finished.Comment: 15 pages, 5 figures. Accepted for publication in ApJ Letter

Acceleration and Expansion of a Coronal Mass Ejection in the High Corona: Role of Magnetic Reconnection

The important role played by magnetic reconnection in the early acceleration of coronal mass ejections (CMEs) has been widely discussed. However, as CMEs may have expansion speeds comparable to their propagation speeds in the corona, it is not clear whether and how reconnection contributes to the true acceleration and expansion separately. To address this question, we analyze the dynamics of a moderately fast CME on 2013 February 27, associated with a continuous acceleration of its front into the high corona, even though its speed had reached $\sim$700~km~s$^{-1}$ and larger than the solar wind speed. The apparent CME acceleration is found to be due to the CME expansion in the radial direction. The CME true acceleration, i.e., the acceleration of its center, is then estimated by taking into account the expected deceleration caused by the solar wind drag force acting on a fast CME. It is found that the true acceleration and the radial expansion have similar magnitudes. We find that magnetic reconnection occurs after the CME eruption and continues during the CME propagation in the high corona, which contributes to the CME dynamic evolution. Comparison between the apparent acceleration related to the expansion and the true acceleration that compensates the drag shows that, for this case, magnetic reconnection contributes almost equally to the CME expansion and to the CME acceleration. The consequences of these measurements for the evolution of CMEs as they transit from the corona to the heliosphere are discussed.Comment: Accepted by Ap

Comparing generic models for interplanetary shocks and magnetic clouds axis configurations at 1 AU

Interplanetary coronal mass ejections (ICMEs) are the manifestation of solar transient eruptions, which can significantly modify the plasma and magnetic conditions in the heliosphere. They are often preceded by a shock, and a magnetic flux rope is detected in situ in a third to half of them. The main aim of this study is to obtain the best quantitative shape for the flux rope axis and for the shock surface from in situ data obtained during spacecraft crossings of these structures. We first compare the orientation of the flux rope axes and shock normals obtained from independent data analyses of the same events, observed in situ at 1 AU from the Sun. Then we carry out an original statistical analysis of axes/shock normals by deriving the statistical distributions of their orientations. We fit the observed distributions using the distributions derived from several synthetic models describing these shapes. We show that the distributions of axis/shock orientations are very sensitive to their respective shape. One classical model, used to analyze interplanetary imager data, is incompatible with the in situ data. Two other models are introduced, for which the results for axis and shock normals lead to very similar shapes; the fact that the data for MCs and shocks are independent strengthens this result. The model which best fits all the data sets has an ellipsoidal shape with similar aspect ratio values for all the data sets. These derived shapes for the flux rope axis and shock surface have several potential applications. First, these shapes can be used to construct a consistent ICME model. Second, these generic shapes can be used to develop a quantitative model to analyze imager data, as well as constraining the output of numerical simulations of ICMEs. Finally, they will have implications for space weather forecasting, in particular, for forecasting the time arrival of ICMEs at the Earth.Fil: Janvier, Miho. University of Dundee; Reino UnidoFil: Dasso, Sergio Ricardo. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Departamento de Ciencias de la Atmósfera y los Océanos; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Astronomía y Física del Espacio. - Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Astronomía y Física del Espacio; ArgentinaFil: Démoulin, Pascal. Centre National de la Recherche Scientifique. Observatoire de Paris; FranciaFil: Masías Meza, Jimmy Joel. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Física de Buenos Aires. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Física de Buenos Aires; ArgentinaFil: Lugaz, Noé. University Of New Hampshire; Estados Unido

Towards a Realistic, Data-Driven Thermodynamic MHD Model of the Global Solar Corona

In this work we describe our implementation of a thermodynamic energy equation into the global corona model of the Space Weather Modeling Framework (SWMF), and its development into the new Lower Corona (LC) model. This work includes the integration of the additional energy transport terms of coronal heating, electron heat conduction, and optically thin radiative cooling into the governing magnetohydrodynamic (MHD) energy equation. We examine two different boundary conditions using this model; one set in the upper transition region (the Radiative Energy Balance model), as well as a uniform chromospheric condition where the transition region can be modeled in its entirety. Via observation synthesis from model results and the subsequent comparison to full sun extreme ultraviolet (EUV) and soft X-Ray observations of Carrington Rotation (CR) 1913 centered on Aug 27, 1996, we demonstrate the need for these additional considerations when using global MHD models to describe the unique conditions in the low corona. Through multiple simulations we examine ability of the LC model to asses and discriminate between coronal heating models, and find that a relative simple empirical heating model is adequate in reproducing structures observed in the low corona. We show that the interplay between coronal heating and electron heat conduction provides significant feedback onto the 3D magnetic topology in the low corona as compared to a potential field extrapolation, and that this feedback is largely dependent on the amount of mechanical energy introduced into the corona.Comment: 17 pages, 11 figures, Submitted to ApJ on 12/08/200