3,851 research outputs found
Measuring the Deformation of a Flat Die by Applying a Laser Beam on a Reflecting Surface
The design of extrusion dies depends on the experience of the designer. After the die has been manufactured, it is tested during an extrusion process and machined several times until it works properly. The die is designed by a trial and error method which is expensive interms of time consumption and the amount of scrap. Research is going on to replace the trial pressing with finite element simulations that concentrate on material and tool analysis. In order to validate the tool simulations, an experiment is required for measuring the deformation of the die. Measuring the deformation of the die is faced with two main obstacles: high temperature and little free space. To overcome these obstacles a method is tried, which works by applying a laser beam on a reflecting surface. This cheap method is simple, robust and gives good results. This paper describes measuring the deformation of a flat die used to extrude a single U shape profile. In addition, finite element calculation of the die is performed. Finally, a comparison is performed between experimental and numerical results
Ranging and tracking system for proximity operations, phase 1
A study task is reported which is directed towards developing a conceptual design of a small, lightweight range and range rate radar sensor system to meet NASA's requirements for accurate short-range and velocity measurements in an orbital environment. Within the context of the requirements, the short range implies system operation at 0 m to 1850 m (6000 ft) and accurate implies a range measurement to within 1 sigma accuracy of 0.20 m (0.67 ft) and a range rate (velocity) measurement to within 1 sigma accuracy of 0.01 m/sec (0.033 ft/sec)
Using the X-FEL to understand X-ray Thomson scattering for partially ionized plasmas
For the last decade numerous researchers have been trying to develop
experimental techniques to use X-ray Thomson scattering as a method to measure
the temperature, electron density, and ionization state of high energy density
plasmas such as those used in inertial confinement fusion. With the advent of
the X-ray free electron laser (X-FEL) at the SLAC Linac Coherent Light Source
(LCLS) we now have such a source available in the keV regime. One challenge
with X-ray Thomson scattering experiments is understanding how to model the
scattering for partially ionized plasmas. Most Thomson scattering codes used to
model experimental data greatly simplify or neglect the contributions of the
bound electrons to the scattered intensity. In this work we take the existing
models of Thomson scattering that include elastic ion-ion scattering and the
electron-electron plasmon scattering and add the contribution of the bound
electrons in the partially ionized plasmas. Except for hydrogen plasmas almost
every plasma that is studied today has bound electrons and it is important to
understand their contribution to the Thomson scattering, especially as new
X-ray sources such as the X-FEL will allow us to study much higher Z plasmas.
Currently most experiments have looked at hydrogen or beryllium. We will first
look at the bound electron contributions to beryllium by analysing existing
experimental data. We then consider several higher Z materials such as Cr and
predict the existence of additional peaks in the scattering spectrum that
requires new computational tools to understand. For a Sn plasma we show that
the bound contributions changes the shape of the scattered spectrum in a way
that would change the plasma temperature and density inferred by the
experiment.Comment: 13th International Conference on X-ray Lasers Paris, France June 10,
2012 through June 15, 201
Average-Atom Model for X-ray Scattering from Warm Dense Matter
A scheme for analyzing Thomson scattering of x-rays by warm dense matter,
based on the average-atom model, is developed. Emphasis is given to x-ray
scattering by bound electrons. Contributions to the scattered x-ray spectrum
from elastic scattering by electrons moving with the ions and from inelastic
scattering by free and bound electrons are evaluated using parameters (chemical
potential, average ionic charge, free electron density, bound and continuum
wave functions, and occupation numbers) taken from the average-atom model. The
resulting scheme provides a relatively simple diagnostic for use in connection
with x-ray scattering measurements. Applications are given to dense hydrogen,
beryllium, aluminum, titanium, and tin plasmas. At high momentum transfer,
contributions from inelastic scattering by bound electrons are dominant
features of the scattered x-ray spectrum for aluminum, titanium, and tin.Comment: 22 pages, 10 figures Presentation at Workshop IV: Computational
Challenges in Warm Dense Matter at IPAM (UCLA) May 21 - 25, 201
Single-stage experimental evaluation of tandem-airfoil rotor and stator blading for compressors. Part 1: Analysis and design of stages A, B, and C
A conventional rotor and stator, two dual-airfoil tandem rotors, and one dual-airfoil tandem stator were designed. The two tandem rotors were each designed with different percentages of the overall lift produced by the front airfoil. Velocity diagrams and blade leading and trailing edge metal angles selected for the conventional rotor and stator blading were used in the design of the tandem blading. Rotor inlet hub/tip ratio was 0.8. Design values of rotor tip velocity and stage pressure ratio were 757 ft/sec and 1.30, respectively
Pricing Behaviour and Menu Costs in Multi-product Firms
This paper investigates the micro-foundations of pricing behaviour using monthly producer prices for Norwegian multi-product firms. We find both infrequent and many small price changes together with a high degree of within-firm synchronization. This points at fixed menu costs featuring scope economies, at additional linear and convex price adjustment costs, and at the presence of firm-specific shocks. The structural estimates and a simulation support the view that in order to understand pricing behaviour and the effectiveness of monetary policy, the analysis of multi-product firms and a richer price adjustment technology in the intermediate goods sector is valuable
Shuttle Global Positioning System (GPS) design study
The effects of oscillator noise on Shuttle Global Positioning System (GPS) receiver performance, GPS navigation system self-test, GPS ground transmitter design to augment shuttle navigation, the effect of ionospheric delay modelling on GPS receiver design, and GPS receiver tracking of Shuttle transient maneuvers were investigated
- …