55 research outputs found
Diagnosing coronary artery disease by sound analysis from coronary stenosis induced turbulent blood flow: diagnostic performance in patients with stable angina pectoris
Optimizing risk assessment may reduce use of advanced diagnostic testing in patients with symptoms suggestive of stable coronary artery disease (CAD). Detection of diastolic murmurs from post-stenotic coronary turbulence with an acoustic sensor placed on the chest wall can serve as an easy, safe, and low-cost supplement to assist in the diagnosis of CAD. The aim of this study was to evaluate the diagnostic accuracy of an acoustic test (CAD-score) to detect CAD and compare it to clinical risk stratification and coronary artery calcium score (CACS). We prospectively enrolled patients with symptoms of CAD referred to either coronary computed tomography or invasive coronary angiography (ICA). All patients were tested with the CAD-score system. Obstructive CAD was defined as more than 50 % diameter stenosis diagnosed by quantitative analysis of the ICA. In total, 255 patients were included and obstructive CAD was diagnosed in 63 patients (28 %). Diagnostic accuracy evaluated by receiver operating characteristic curves was 72 % for the CAD-score, which was similar to the Diamond–Forrester clinical risk stratification score, 79 % (p = 0.12), but lower than CACS, 86 % (p < 0.01). Combining the CAD-score and Diamond–Forrester score, AUC increased to 82 %, which was significantly higher than the standalone CAD-score (p < 0.01) and Diamond–Forrester score (p < 0.05). Addition of the CAD-score to the Diamond–Forrester score increased correct reclassification, categorical net-reclassification index = 0.31 (p < 0.01). This study demonstrates the potential use of an acoustic system to identify CAD. The combination of clinical risk scores and an acoustic test seems to optimize patient selection for diagnostic investigation.Danish National Business Innovation Fund and Acarix A/S
Randomised comparison of provisional side branch stenting versus a two-stent strategy for treatment of true coronary bifurcation lesions involving a large side branch : the Nordic-Baltic Bifurcation Study IV
Background It is still uncertain whether coronary bifurcations with lesions involving a large side branch (SB) should be treated by stenting the main vessel and provisional stenting of the SB (simple) or by routine two-stent techniques (complex). We aimed to compare clinical outcome after treatment of lesions in large bifurcations by simple or complex stent implantation. Methods The study was a randomised, superiority trial. Enrolment required a SB >= 2.75 mm, >= 50% diameter stenosis in both vessels, and allowed SB lesion length up to 15 mm. The primary endpoint was a composite of cardiac death, non-procedural myocardial infarction and target lesion revascularisation at 6 months. Two-year clinical follow-up was included in this primary reporting due to lower than expected event rates. Results A total of 450 patients were assigned to simple stenting (n = 221) or complex stenting (n=229) in 14 Nordic and Baltic centres. Two-year follow-up was available in 218 (98.6%) and 228 (99.5%) patients, respectively. The primary endpoint of major adverse cardiac events (MACE) at 6 months was 5.5% vs 2.2% (risk differences 3.2%, 95% CI -0.2 to 6.8, p=0.07) and at 2 years 12.9% vs 8.4% (HR 0.63, 95% CI 0.35 to 1.13, p = 0.12) after simple versus complex treatment. In the subgroup treated by newer generation drug-eluting stents, MACE was 12.0% vs 5.6% (HR 0.45, 95% CI 0.17 to 1.17, p = 0.10) after simple versus complex treatment. Conclusion In the treatment of bifurcation lesions involving a large SB with ostial stenosis, routine two-stent techniques did not improve outcome significantly compared with treatment by the simpler main vessel stenting technique after 2 years.Peer reviewe
Anatomical classification of chronic total occlusions in coronary bifurcations
Percutaneous coronary intervention (PCI) of chronic total occlusions (CTO) in coronary bifurcation lesions (CBL) is undergoing substantial technical progress and standardization, paralleling the evolution of dedicated devices, tools, and techniques. A standard consensus to classify CTO-CBL might be instrumental to homogenize data collection and description of procedures for scientific and educational purposes. The Medina-CTO classification replicates the classical three digits in Medina classification for bifurcations, representing the proximal main vessel, distal main vessel, and side branch, respectively. Each digit can take a value of 1 if it concerns atherosclerosis and is anatomically stenosed, or 0 if it is not. In addition, the occluded segment(s) of the bifurcation are noted by a subscript, which describes key interventional features of the cap: t (tapered), b (blunt), or a (ambiguous). This approach results in 56 basic categories that can be grouped by means of different elements, depending on the specific needs of each study. Medina-CTO classification, consisting of adding a subscript describing the basic cap characteristics to the totally occluded segment(s) of the standard Medina triplet, might be a useful methodological tool to standardize percutaneous intervention of bifurcational CTO lesions, with interesting scientific and educational applications
Prognostic value of microvascular resistance and its association to fractional flow reserve:a DEFINE-FLOW substudy
OBJECTIVE: This study aimed to evaluate the prognostic value of hyperemic microvascular resistance (HMR) and its relationship with hyperemic stenosis resistance (HSR) index and fractional flow reserve (FFR) in stable coronary artery disease. METHODS: This is a substudy of the DEFINE-FLOW cohort (NCT02328820), which evaluated the prognosis of lesions (n=456) after combined FFR and coronary flow reserve (CFR) assessment in a prospective, non-blinded, non-randomised, multicentre study in 12 centres in Europe and Japan. Participants (n=430) were evaluated by wire-based measurement of coronary pressure, flow and vascular resistance (ComboWire XT, Phillips Volcano, San Diego, California, USA). RESULTS: Mean FFR and CFR were 0.82±0.10 and 2.2±0.6, respectively. When divided according to FFR and CFR thresholds (above and below 0.80 and 2.0, respectively), HMR was highest in lesions with FFR>0.80 and CFR<2.0 (n=99) compared with lesions with FFR≤0.80 and CFR≥2.0 (n=68) (2.92±1.2 vs 1.91±0.64 mm Hg/cm/s, p<0.001). The FFR value was proportional to the ratio between HMR and the HMR+HSR (total resistance), 95% limits of agreement (−0.032; 0.019), bias (−0.003±0.02) and correlation (r(2)=0.98, p<0.0001). Cox regression model using HMR as continuous parameter for target vessel failure showed an HR of 1.51, 95% CI (0.9 to 2.4), p=0.10. CONCLUSIONS: Increased HMR was not associated with a higher rate of adverse clinical events, in this population of mainly stable patients. FFR can be equally well expressed as HMR/HMR+HSR, thereby providing an alternative conceptual formulation linking epicardial severity with microvascular resistance. TRIAL REGISTRATION NUMBER: NCT02328820
Characterization of quantitative flow ratio and fractional flow reserve discordance using doppler flow and clinical follow-up
The physiological mechanisms of quantitative flow ratio and fractional flow reserve disagreement are not fully understood. We aimed to characterize the coronary flow and resistance profile of intermediate stenosed epicardial coronary arteries with concordant and discordant FFR and QFR. Post-hoc analysis of the DEFINE-FLOW study. Anatomical and Doppler-derived physiological parameters were compared for lesions with FFR+QFR− (n = 18) vs. FFR+QFR+ (n = 43) and for FFR−QFR+ (n = 34) vs. FFR−QFR− (n = 139). The association of QFR results with the two-year rate of target vessel failure was assessed in the proportion of vessels (n = 195) that did not undergo revascularization. Coronary flow reserve was higher [2.3 (IQR: 2.1–2.7) vs. 1.9 (IQR: 1.5–2.4)], hyperemic microvascular resistance lower [1.72 (IQR: 1.48–2.31) vs. 2.26 (IQR: 1.79–2.87)] and anatomical lesion severity less severe [% diameter stenosis 45.5 (IQR: 41.5–52.5) vs. 58.5 (IQR: 53.1–64.0)] for FFR+QFR− lesions compared with FFR+QFR+ lesions. In comparison of FFR−QFR+ vs. FFR-QFR- lesions, lesion severity was more severe [% diameter stenosis 55.2 (IQR: 51.7–61.3) vs. 43.4 (IQR: 35.0–50.6)] while coronary flow reserve [2.2 (IQR: 1.9–2.9) vs. 2.2 (IQR: 1.9–2.6)] and hyperemic microvascular resistance [2.34 (IQR: 1.85–2.81) vs. 2.57 (IQR: 2.01–3.22)] did not differ. The agreement and diagnostic performance of FFR using hyperemic stenosis resistance (> 0.80) as reference standard was higher compared with QFR and coronary flow reserve. Disagreement between FFR and QFR is partly explained by physiological and anatomical factors. Clinical Trials Registration https://www.clinicaltrials.gov; Unique identifier: NCT01813435. Graphical abstract: Changes in central physiological and anatomical parameters according to FFR and QFR match/mismatch quadrants
Danish study of Non-Invasive testing in Coronary Artery Disease (Dan-NICAD):study protocol for a randomised controlled trial
BACKGROUND: Coronary computed tomography angiography (CCTA) is an established method for ruling out coronary artery disease (CAD). Most patients referred for CCTA do not have CAD and only approximately 20–30 % of patients are subsequently referred to further testing by invasive coronary angiography (ICA) or non-invasive perfusion evaluation due to suspected obstructive CAD. In cases with severe calcifications, a discrepancy between CCTA and ICA often occurs, leading to the well-described, low-diagnostic specificity of CCTA. As ICA is cost consuming and involves a risk of complications, an optimized algorithm would be valuable and could decrease the number of ICAs that do not lead to revascularization. The primary objective of the Dan-NICAD study is to determine the diagnostic accuracy of cardiac magnetic resonance imaging (CMRI) and myocardial perfusion scintigraphy (MPS) as secondary tests after a primary CCTA where CAD could not be ruled out. The secondary objective includes an evaluation of the diagnostic precision of an acoustic technology that analyses the sound of coronary blood flow. It may potentially provide better stratification prior to CCTA than clinical risk stratification scores alone. METHODS/DESIGN: Dan-NICAD is a multi-centre, randomised, cross-sectional trial, which will include approximately 2,000 patients without known CAD, who were referred to CCTA due to a history of symptoms suggestive of CAD and a low-risk to intermediate-risk profile, as evaluated by a cardiologist. Patient interview, sound recordings, and blood samples are obtained in connection with the CCTA. All patients with suspected obstructive CAD by CCTA are randomised to either stress CMRI or stress MPS, followed by ICA with fractional flow reserve (FFR) measurements. Obstructive CAD is defined as an FFR below 0.80 or as high-grade stenosis (>90 % diameter stenosis) by visual assessment. Diagnostic performance is evaluated as sensitivity, specificity, predictive values, likelihood ratios, and C statistics. Enrolment commenced in September 2014 and is expected to be complete in May 2016. DISCUSSION: Dan-NICAD is designed to assess whether a secondary perfusion examination after CCTA could safely reduce the number of ICAs where revascularization is not required. The results are expected to add knowledge about the optimal algorithm for diagnosing CAD. TRIAL REGISTRATION: Clinicaltrials.gov identifier, NCT02264717. Registered on 26 September 2014. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1186/s13063-016-1388-z) contains supplementary material, which is available to authorized users
Mechanical performance and healing patterns of the novel sirolimus-eluting bioresorbable Fantom scaffold : 6-month and 9-month follow-up by optical coherence tomography in the FANTOM II study
Diagnostic performance of an acoustic-based system for coronary artery disease risk stratification
ObjectiveDiagnosing coronary artery disease (CAD) continues to require substantial healthcare resources. Acoustic analysis of transcutaneous heart sounds of cardiac movement and intracoronary turbulence due to obstructive coronary disease could potentially change this. The aim of this study was thus to test the diagnostic accuracy of a new portable acoustic device for detection of CAD.MethodsWe included 1675 patients consecutively with low to intermediate likelihood of CAD who had been referred for cardiac CT angiography. If significant obstruction was suspected in any coronary segment, patients were referred to invasive angiography and fractional flow reserve (FFR) assessment. Heart sound analysis was performed in all patients. A predefined acoustic CAD-score algorithm was evaluated; subsequently, we developed and validated an updated CAD-score algorithm that included both acoustic features and clinical risk factors. Low risk is indicated by a CAD-score value ≤20.ResultsHaemodynamically significant CAD assessed from FFR was present in 145 (10.0%) patients. In the entire cohort, the predefined CAD-score had a sensitivity of 63% and a specificity of 44%. In total, 50% had an updated CAD-score value ≤20. At this cut-off, sensitivity was 81% (95% CI 73% to 87%), specificity 53% (95% CI 50% to 56%), positive predictive value 16% (95% CI 13% to 18%) and negative predictive value 96% (95% CI 95% to 98%) for diagnosing haemodynamically significant CAD.ConclusionSound-based detection of CAD enables risk stratification superior to clinical risk scores. With a negative predictive value of 96%, this new acoustic rule-out system could potentially supplement clinical assessment to guide decisions on the need for further diagnostic investigation.Trial registration numberClinicalTrials.gov identifier NCT02264717; Results.</jats:sec
Anatomical classification of chronic total occlusions in coronary bifurcations
Percutaneous coronary intervention (PCI) of chronic total occlusions (CTO) in coronary bifurcation lesions (CBL) is undergoing substantial technical progress and standardization, paralleling the evolution of dedicated devices, tools, and techniques. A standard consensus to classify CTO-CBL might be instrumental to homogenize data collection and description of procedures for scientific and educational purposes. The Medina-CTO classification replicates the classical three digits in Medina classification for bifurcations, representing the proximal main vessel, distal main vessel, and side branch, respectively. Each digit can take a value of 1 if it concerns atherosclerosis and is anatomically stenosed, or 0 if it is not. In addition, the occluded segment(s) of the bifurcation are noted by a subscript, which describes key interventional features of the cap: t (tapered), b (blunt), or a (ambiguous). This approach results in 56 basic categories that can be grouped by means of different elements, depending on the specific needs of each study. Medina-CTO classification, consisting of adding a subscript describing the basic cap characteristics to the totally occluded segment(s) of the standard Medina triplet, might be a useful methodological tool to standardize percutaneous intervention of bifurcational CTO lesions, with interesting scientific and educational applications
- …