Modular coherent photonic-aided payload receiver for communications satellites

Ubiquitous satellite communications are in a leading position for bridging the digital divide. Fulfilling such a mission will require satellite services on par with fibre services, both in bandwidth and cost. Achieving such a performance requires a new generation of communications payloads powered by large-scale processors, enabling a dynamic allocation of hundreds of beams with a total capacity beyond 1 Tbit s−1. The fact that the scale of the processor is proportional to the wavelength of its signals has made photonics a key technology for its implementation. However, one last challenge hinders the introduction of photonics: while large-scale processors demand a modular implementation, coherency among signals must be preserved using simple methods. Here, we demonstrate a coherent photonic-aided receiver meeting such demands. This work shows that a modular and coherent photonic-aided payload is feasible, making way to an extensive introduction of photonics in next generation communications satellites

Study on the Sensing Coating of the Optical Fibre CO2 Sensor

Optical fibre carbon dioxide (CO2) sensors are reported in this article. The principle of operation of the sensors relies on the absorption of light transmitted through the fibre by a silica gel coating containing active dyes, including methyl red, thymol blue and phenol red. Stability of the sensor has been investigated for the first time for an absorption based CO2 optical fiber sensor. Influence of the silica gel coating thickness on the sensitivity and response time has also been studied. The impact of temperature and humidity on the sensor performance has been examined too. Response times of reported sensors are very short and reach 2–3 s, whereas the sensitivity of the sensor ranges from 3 to 10 for different coating thicknesses. Reported parameters make the sensor suitable for indoor and industrial use

New Methods of Enhancing the Thermal Durability of Silica Optical Fibers

Microstructured optical fibers can be precisely tailored for many different applications, out of which sensing has been found to be particularly interesting. However, placing silica optical fiber sensors in harsh environments results in their quick destruction as a result of the hydrolysis process. In this paper, the degradation mechanism of bare and metal-coated optical fibers at high temperatures under longitudinal strain has been determined by detailed analysis of the thermal behavior of silica and metals, like copper and nickel. We furthermore propose a novel method of enhancing the lifetime of optical fibers by the deposition of electroless nickel-phosphorous alloy in a low-temperature chemical process. The best results were obtained for a coating comprising an inner layer of copper and outer layer of low phosphorous nickel. Lifetime values obtained during the annealing experiments were extrapolated to other temperatures by a dedicated model elaborated by the authors. The estimated copper-coated optical fiber lifetime under cycled longitudinal strain reached 31 h at 450 °C

Opto-mechanical cross-talk reduction in air-holes multicore fibers

We report on the use of air-holes in multicore fibers to alleviate intercore perturbations induced by forward stimulated Brillouin scattering. Comparisons with conventional multicore fibers show significant improvement in terms of cross-talk reduction.SCI-STI-L

Intermodal measurements in few-mode fibers with phase- sensitive OTDR

We experimentally verify the possibility of measuring the difference in effective refractive index between higher-order-modes using a phase-sensitive OTDR, indicating that it is possible to measure the average difference over long fiber spans.SCI-STI-L

Distributed measurement of mode group effective refractive index difference in a few mode optical fibers

The possibility to perform distributed measurements of the effective refractive index difference between distinct modes in few mode optical fibers is demonstrated using phase sensitive optical time domain reflectometry. Effective refractive index differences between LP02, LP21a and LP21b modes are measured with for a spatial resolution of 24m

Point-by-point fiber bragg grating inscription in free-standing step-index and photonic crystal fibers using near-ir femtosecond laser

We report what we believe to be the first highly symmetric first-order IR femtosecond laser fiber Bragg gratings within the telecommunications C band in free-standing optical fiber, fabricated with a relatively low NA lens and without use of oil immersion techniques. This grating features the smallest dimensions for a pointby-point fiber grating reported so far (to our knowledge). This achievement paves the way to rapid mass manufacturing of highly efficient and stable Bragg gratings using ultrafast lasers in any type of fiber. Mastering this femtosecond grating inscription technique also allowed the fabrication of the first Bragg gratings with direct near-IR femtosecond inscription in photonic crystal fibers, and without the use of techniques that rely on the compensation of the holey structure