Enhancement of flexibility in multi-energy microgrids considering voltage and congestion improvement: Robust thermal comfort against reserve calls

In recent years, multi-energy microgrid (MEM) has gained increasing interest, which could use clean and efficient electro-thermal resources, multi-energy storages (MESs) and demand response potential to improve the flexibility of MEM. However, maximizing the flexibility potential of MEM and alongside managing the electrical parameters (EPs) is a challenging modeling problem. In this paper, a probabilistic nonlinear model is presented to maximize the flexibility with all the power grid constraints taking into account EPs constraints using power flow. To this end, voltage profile and congestion improvement, robust thermal comfort provision during reserve call and MESs utilization are the key properties of the proposed model. The outcome of suggested model ensures sustainability in the MEM performance, which is an essential feature in modern smart cities. The presented model is applied to a distribution network in the UK and results illustrate how equipment scheduling and demand response leads to observe the EPs limitation and maximizes MEM flexibility. The achieved results show a decrease in MEM revenue (decrease of 34% and 24% without and with reserve commitment, respectively) and in contrast, a significant increase in flexibility compared to non-compliance with EPs constraints

Dynamic stochastic joint expansion planning of power systems, natural gas networks, and electrical and natural gas storage

Over the last decades, electricity generation from natural gas has substantially increased, mostly driven by low natural gas prices due to fracturing and lower extraction costs. The geographic distance between natural gas resources and load centers calls for a holistic tool for joint expansion of power systems and natural gas networks. In this paper, a Dynamic Stochastic Joint Expansion Planning (DSJEP) of power systems and natural gas networks is proposed to minimize the investment and operational costs of power and natural gas systems. Electrical and natural gas storage (ENGS) are considered as an option for decision-makers in the DSJEP problem. The proposed approach takes into account long-term uncertainties in natural gas prices and electric and natural gas demands through scenario realizations. In dynamic planning, more scenario needs more time for computation; therefore, scenario reduction is implemented to eschew unnecessary scenarios. The proposed formulation is implemented on a four-bus electricity system with a five-node natural gas network. To demonstrate the efficiency and scalability of the proposed approach, it is also tested on the IEEE 118-bus system with a 14-node natural gas network. The numerical results demonstrate that ENGS can reduce the total investment cost, up to 52% in the test cases, and operational cost, up to 3%. In this paper, co-planning of power and natural gas systems considering natural gas and electrical storage is represented. Also, electrical and natural gas load growth uncertainties are taken into account to model the real situations. The purpose of the model is to minimize investing and operational costs

Mechanisms of grain refinement by intensive shearing of AZ91 alloy melt

The official published version of the article can be accessed at the link below.It has been demonstrated recently that intensive melt shearing can be an effective approach to the grain refinement of both shape casting and continuous casting of Mg alloys. In the present study, the mechanisms of grain refinement by intensive melt shearing were investigated through a combination of both modelling and experimental approaches. The measurement of the cooling curves during solidification, quantification of grain size of the solidified samples, and image analysis of the MgO particle size and size distribution in the pressurized filtration samples were performed for the AZ91 alloy with and without intensive melt shearing. The experimental results were then used as input parameters for the free growth model to investigate the mechanisms of grain refinement by intensive melt shearing. The experimental results showed that, although intensive melt shearing does not change the nucleation starting temperature, it increases the nucleation finishing temperature, giving rise to a reduced nucleation undercooling. The theoretical modelling using the free growth model revealed quantitatively that intensive melt shearing can effectively disperse MgO particles densely populated in the oxide films into more individual particles in the alloy melt, resulting in an increase in the MgO particle density by three orders of magnitude and the density of active nucleating MgO particles by a factor of 20 compared with those of the non-sheared melt. Therefore, the grain refining effect of intensive melt shearing can be confidently attributed to the significantly increased refining efficiency of the naturally occurring MgO particles in the alloy melt as potent nucleation sites.Financial support under Grant EP/H026177/1 from the EPSRC

Measurement of peripheral dose to the pelvic region and the associated risk for cancer development after breast intraoperative electron radiation therapy

This study aimed to measure the received dose to the pelvic region of patients during breast intraoperative electron radiation therapy (IOERT). Furthermore, we compared the findings with those of external beam radiation therapy. Finally, secondary ovarian and uterus cancer risks following breast IOERT were estimated. In the current study, the received dose to the pelvic surface of 18 female patients during breast IOERT boosts were measured by thermoluminescent dosimeter (TLD-100) chips. All patients were treated with 12 Gy given in a single fraction. To estimate the dose to the ovary and uterus of the patients, conversion coefficients for depth from the surface dose were obtained in a Rando phantom. Given the received dose to the pelvic region of the patients, secondary ovarian and uterus cancer risks following breast IOERT were estimated. The received doses to the ovary and uterus surface of the patients were 0.260 ±0.155 mGy to 31.460 ±6.020 mGy and 0.485 ±0.122 mGy to 22.387 ±15.476 mGy, respectively. Corresponding intra-pelvic (ovary and uterus) regional doses were 0.012 ±0.007 mGy to 1.479 ±0.283 mGy and 0.027 ±0.001 mGy to 1.164 ±0.805 mGy, respectively. Findings demonstrated that the ratio of the received dose by the pelvic surface to the regional dose during breast IOERT was much less than external beam radiation therapy. The mean of the secondary cancer risks for the ovary in 8 and 10 MeV electron beam energies were 135.722 ±117.331 �10 -6 and 69.958 ±28.072 �10 -6 , and for the uterus were 17.342 ±10.583 �10 -6 and 2.971 ±3.604 �10 -6 , respectively. According to our findings, the use of breast IOERT in pregnant patients can be considered as a safe radiotherapeutic technique, because the received dose to the fetus was lower than 50 mGy. Furthermore, IOERT can efficiently reduce the unnecessary dose to the pelvic region and lowers the risk of secondary ovarian and uterus cancer following breast irradiation. © 2019 Society for Radiological Protection. Published on behalf of SRP by IOP Publishing Limited. All rights reserved

Grain refinement of Al-Mg-Sc alloy by ultrasonic treatment

In foundry practice, ultrasonic treatment has been used as an efficient technique to achieve grain refinement in aluminium and magnesium alloys. This article shows the strong effect of pouring temperature and ultrasonic treatment at various temperatures on the grain refinement of Al-1 wt% Mg-0.3 wt% Sc alloy. Without ultrasonic treatment, a fine grain structure was obtained at the pouring temperature of 700 °C. The average grain size sharply decreases from 487 ± 20 to 103 ± 2 μm when the pouring temperature decreases from 800 to 700 °C. Ultrasonic vibration proved to be a potential grain refinement technique with a wide range of pouring tem- perature. A microstructure with very fine and homogeneous grains was obtained by applying ultrasonic treatment to the melt at the temperature range between 700 and 740 °C, before pouring. Cavitation-enhanced hetero- geneous nucleation is the mechanism proposed to explain grain refinement by ultrasound in this alloy. Moreover, ultrasonic treatment of the melt was found to lead to cast samples with hardness values similar to those obtained in samples submitted to precipitation hardening, suggesting that ultrasonic treatment can avoid carrying out heat treatment of cast parts.This research was supported by The Project Bridging The Gap, funded by the Erasmus Mundus External Cooperation Window Programme. Acknowledgements also to the University of Minho, for the provision of research facilities

A composite transcriptional signature differentiates responses towards closely related herbicides in Arabidopsis thaliana and Brassica napus

In this study, genome-wide expression profiling based on Affymetrix ATH1 arrays was used to identify discriminating responses of Arabidopsis thaliana to five herbicides, which contain active ingredients targeting two different branches of amino acid biosynthesis. One herbicide contained glyphosate, which targets 5-enolpyruvylshikimate-3-phosphate synthase (EPSPS), while the other four herbicides contain different acetolactate synthase (ALS) inhibiting compounds. In contrast to the herbicide containing glyphosate, which affected only a few transcripts, many effects of the ALS inhibiting herbicides were revealed based on transcriptional changes related to ribosome biogenesis and translation, secondary metabolism, cell wall modification and growth. The expression pattern of a set of 101 genes provided a specific, composite signature that was distinct from other major stress responses and differentiated among herbicides targeting the same enzyme (ALS) or containing the same chemical class of active ingredient (sulfonylurea). A set of homologous genes could be identified in Brassica napus that exhibited a similar expression pattern and correctly distinguished exposure to the five herbicides. Our results show the ability of a limited number of genes to classify and differentiate responses to closely related herbicides in A. thaliana and B. napus and the transferability of a complex transcriptional signature across species

DETORQUEO, QUIRKY, and ZERZAUST Represent Novel Components Involved in Organ Development Mediated by the Receptor-Like Kinase STRUBBELIG in Arabidopsis thaliana

Intercellular signaling plays an important role in controlling cellular behavior in apical meristems and developing organs in plants. One prominent example in Arabidopsis is the regulation of floral organ shape, ovule integument morphogenesis, the cell division plane, and root hair patterning by the leucine-rich repeat receptor-like kinase STRUBBELIG (SUB). Interestingly, kinase activity of SUB is not essential for its in vivo function, indicating that SUB may be an atypical or inactive receptor-like kinase. Since little is known about signaling by atypical receptor-like kinases, we used forward genetics to identify genes that potentially function in SUB-dependent processes and found recessive mutations in three genes that result in a sub-like phenotype. Plants with a defect in DETORQEO (DOQ), QUIRKY (QKY), and ZERZAUST (ZET) show corresponding defects in outer integument development, floral organ shape, and stem twisting. The mutants also show sub-like cellular defects in the floral meristem and in root hair patterning. Thus, SUB, DOQ, QKY, and ZET define the STRUBBELIG-LIKE MUTANT (SLM) class of genes. Molecular cloning of QKY identified a putative transmembrane protein carrying four C2 domains, suggesting that QKY may function in membrane trafficking in a Ca2+-dependent fashion. Morphological analysis of single and all pair-wise double-mutant combinations indicated that SLM genes have overlapping, but also distinct, functions in plant organogenesis. This notion was supported by a systematic comparison of whole-genome transcript profiles during floral development, which molecularly defined common and distinct sets of affected processes in slm mutants. Further analysis indicated that many SLM-responsive genes have functions in cell wall biology, hormone signaling, and various stress responses. Taken together, our data suggest that DOQ, QKY, and ZET contribute to SUB-dependent organogenesis and shed light on the mechanisms, which are dependent on signaling through the atypical receptor-like kinase SUB

Intracellular Trafficking Considerations in the Development of Natural Ligand-Drug Molecular Conjugates for Cancer

Overexpressed receptors, characteristic of many cancers, have been targeted by various researchers to achieve a more specific treatment for cancer. A common approach is to use the natural ligand for the overexpressed receptor as a cancer-targeting agent which can deliver a chemically or genetically conjugated toxic molecule. However, it has been found that the therapeutic efficacy of such ligand-drug molecular conjugates can be limited, since they naturally follow the intracellular trafficking pathways of the endogenous ligands. Therefore, a thorough understanding of the intracellular trafficking properties of these ligands can lead to novel design criteria for engineering ligands to be more effective drug carriers. This review presents a few commonly used ligand/receptor systems where intracellular trafficking considerations can potentially improve the therapeutic efficacy of the ligand-drug molecular conjugates