205 research outputs found
POLOCALC: a Novel Method to Measure the Absolute Polarization Orientation of the Cosmic Microwave Background
We describe a novel method to measure the absolute orientation of the
polarization plane of the CMB with arcsecond accuracy, enabling unprecedented
measurements for cosmology and fundamental physics. Existing and planned CMB
polarization instruments looking for primordial B-mode signals need an
independent, experimental method for systematics control on the absolute
polarization orientation. The lack of such a method limits the accuracy of the
detection of inflationary gravitational waves, the constraining power on the
neutrino sector through measurements of gravitational lensing of the CMB, the
possibility of detecting Cosmic Birefringence, and the ability to measure
primordial magnetic fields. Sky signals used for calibration and direct
measurements of the detector orientation cannot provide an accuracy better than
1 deg. Self-calibration methods provide better accuracy, but may be affected by
foreground signals and rely heavily on model assumptions. The POLarization
Orientation CALibrator for Cosmology, POLOCALC, will dramatically improve
instrumental accuracy by means of an artificial calibration source flying on
balloons and aerial drones. A balloon-borne calibrator will provide far-field
source for larger telescopes, while a drone will be used for tests and smaller
polarimeters. POLOCALC will also allow a unique method to measure the
telescopes' polarized beam. It will use microwave emitters between 40 and 150
GHz coupled to precise polarizing filters. The orientation of the source
polarization plane will be registered to sky coordinates by star cameras and
gyroscopes with arcsecond accuracy. This project can become a rung in the
calibration ladder for the field: any existing or future CMB polarization
experiment observing our polarization calibrator will enable measurements of
the polarization angle for each detector with respect to absolute sky
coordinates.Comment: 15 pages, 5 figures, Accepted by Journal of Astronomical
Instrumentatio
PROTOCALC: an artificial calibrator source for CMB telescopes
Cosmic Microwave Background experiments need to measure polarization
properties of the incoming radiation very accurately to achieve their
scientific goals. As a result of that, it is necessary to properly characterize
these instruments. However, there are not natural sources that can be used for
this purpose. For this reason, we developed the PROTOtype CALibrator for
Cosmology, PROTOCALC, which is a calibrator source designed for the 90GHz band
of these telescopes. This source is purely polarized and the direction of the
polarization vector is known with an accuracy better than 0.1deg. This source
flew for the first time in May 2022 showing promising resultComment: Presented at SPIE Astronomical Telescopes + Instrumentation 202
Optical modeling and polarization calibration for CMB measurements with ACTPol and Advanced ACTPol
The Atacama Cosmology Telescope Polarimeter (ACTPol) is a polarization
sensitive upgrade to the Atacama Cosmology Telescope. Located at an elevation
of 5190 m, ACTPol measures the Cosmic Microwave Background (CMB) temperature
and polarization with arcminute-scale angular resolution. Calibration of the
detector angles is a critical step in producing maps of the CMB polarization.
Polarization angle offsets in the detector calibration can cause leakage in
polarization from E to B modes and induce a spurious signal in the EB and TB
cross correlations, which eliminates our ability to measure potential
cosmological sources of EB and TB signals, such as cosmic birefringence. We
present our optical modeling and measurements associated with calibrating the
detector angles in ACTPol.Comment: 12 pages, 8 figures, conference proceedings submitted to Proceedings
of SPIE; added reference in section 2 and merged repeated referenc
SWIPE: a bolometric polarimeter for the Large-Scale Polarization Explorer
The balloon-borne LSPE mission is optimized to measure the linear
polarization of the Cosmic Microwave Background at large angular scales. The
Short Wavelength Instrument for the Polarization Explorer (SWIPE) is composed
of 3 arrays of multi-mode bolometers cooled at 0.3K, with optical components
and filters cryogenically cooled below 4K to reduce the background on the
detectors. Polarimetry is achieved by means of large rotating half-wave plates
and wire-grid polarizers in front of the arrays. The polarization modulator is
the first component of the optical chain, reducing significantly the effect of
instrumental polarization. In SWIPE we trade angular resolution for
sensitivity. The diameter of the entrance pupil of the refractive telescope is
45 cm, while the field optics is optimized to collect tens of modes for each
detector, thus boosting the absorbed power. This approach results in a FWHM
resolution of 1.8, 1.5, 1.2 degrees at 95, 145, 245 GHz respectively. The
expected performance of the three channels is limited by photon noise,
resulting in a final sensitivity around 0.1-0.2 uK per beam, for a 13 days
survey covering 25% of the sky.Comment: In press. Copyright 2012 Society of Photo-Optical Instrumentation
Engineers. One print or electronic copy may be made for personal use only.
Systematic reproduction and distribution, duplication of any material in this
paper for a fee or for commercial purposes, or modification of the content of
the paper are prohibite
Mechanical design and development of TES bolometer detector arrays for the Advanced ACTPol experiment
The next generation Advanced ACTPol (AdvACT) experiment is currently underway
and will consist of four Transition Edge Sensor (TES) bolometer arrays, with
three operating together, totaling ~5800 detectors on the sky. Building on
experience gained with the ACTPol detector arrays, AdvACT will utilize various
new technologies, including 150mm detector wafers equipped with multichroic
pixels, allowing for a more densely packed focal plane. Each set of detectors
includes a feedhorn array of stacked silicon wafers which form a spline profile
leading to each pixel. This is then followed by a waveguide interface plate,
detector wafer, back short cavity plate, and backshort cap. Each array is
housed in a custom designed structure manufactured from high purity copper and
then gold plated. In addition to the detector array assembly, the array package
also encloses cryogenic readout electronics. We present the full mechanical
design of the AdvACT high frequency (HF) detector array package along with a
detailed look at the detector array stack assemblies. This experiment will also
make use of extensive hardware and software previously developed for ACT, which
will be modified to incorporate the new AdvACT instruments. Therefore, we
discuss the integration of all AdvACT arrays with pre-existing ACTPol
infrastructure.Comment: 9 pages, 5 figures, SPIE Astronomical Telescopes and Instrumentation
conference proceeding
An open source, FPGA-based LeKID readout for BLAST-TNG: Pre-flight results
We present a highly frequency multiplexed readout for large-format superconducting detector arrays intended for use in the next generation of balloon-borne and space-based sub-millimeter and far-infrared missions. We will demonstrate this technology on the upcoming NASA Next Generation Balloon-borne Large Aperture Sub-millimeter Telescope (BLAST-TNG) to measure the polarized emission of Galactic dust at wavelengths of 250, 350 and 500 microns. The BLAST-TNG receiver incorporates the first arrays of Lumped Element Kinetic Inductance Detectors (LeKID) along with the first microwave multiplexing readout electronics to fly in a space-like environment and will significantly advance the TRL for these technologies. After the flight of BLAST-TNG, we will continue to improve the performance of the detectors and readout electronics for the next generation of balloon-borne instruments and for use in a future FIR Surveyor.
Read More: http://www.worldscientific.com/doi/abs/10.1142/S225117171641003
- …