Experimental study and multiscale modelling of the high temperature deformation of tempered martensite under multiaxial loading

peer-reviewedThe microstructural deformation of ex-service 9Cr-1Mo steel, with a tempered martensitic microstructure, has been examined in this study, through the combined use of electron backscatter diffraction (EBSD) and multiscale modelling techniques. Both the experimental and predicted deformation of the material at a notch root on a range of scales from the specimen level down to the microstructural block level are compared. A tension loaded notch specimen of the material which was extracted from an ex-service power plant pipe was used for this analysis. The deformation at the specimen level was quantified by analysis of the load displacement curves and notch opening displacement, which showed excellent agreement with the predicted results from the experimentally calibrated elastic-plastic finite-element model of the specimen geometry. The microstructural deformation was experimentally measured through the use of EBSD carried out at the notch root before and after high temperature mechanical testing. The initial orientation of the microstructure as well as the displacement around the boundary of the area of interest in the macroscale model were applied to a representative volume element (RVE) and a slip based crystal plasticity modelling framework was implemented to model the in-elastic deformation of the material under high temperature loading

Numerical Evaluation of T-stress under Mixed Mode Loading Through the Use of Coarse Meshes

The present paper investigates the employment of coarse meshes in evaluating the T-stress with the displacement method. Several finite element analyses have been carried out with different mesh refinements and accuracies. Mode I and mixed mode I/II loadings have been considered in finite element analyses. Under mode I loading, single and double edge notched geometries have been considered, while plate with central crack has been considerd for mixed mode loading condition. The analyses are compared with the results by the well-nown stress based approach, and showed that the displacement method permits the evaluation of the T-stress with the employment of coarse meshes. By the way, several precautions must be taken when dealing with coarse and very coarse meshes.Peer reviewe