97 research outputs found
Recommended from our members
3D Thermal Model of Laser Surface Glazing for Ti6Al4V alloy
t: Ti6Al4V alloy plays a significant role in the biomedical applications such as bioimplants for its excellent biocompatibility. Its usage can be further extended by improving the surface hardness and wear resistance. In this respect, laser surface glazing (LSG), an advanced surface modification technique, is very useful which can produce thin hardened surface layer and strong metallurgical bonding. Investigation of temporal and spatial temperature distributions of laser glazed surface of materials are essential because temperature plays significant role in achieving required surface properties. Therefore, in this study, a 3D Finite element analysis has been developed to perform transient thermal analysis of LSG for Ti64 alloy. The model investigated temperature distribution, depth of modified zone and heating and cooling. The results show that the peak temperature is attained 2095 K for 300 W laser power, 0.2 mm beam width and 0.15 ms residence time. Since this temperature is above the melting point (1933 K) of Ti64 alloy, the melt depth is calculated 22.5 μm. Furthermore, from the simulation results, the average heating and cooling rates are estimated 1.19×107 Ks-1 and 2.71×106 Ks-1 respectively which indicate the presence of hard phases in the modified zone
Recommended from our members
A One-dimensional Analysis of the Distribution of Temperature, Stress and Strain in the co-axial Laser Cladding Process
The co-axial Laser Cladding (LC) is one of the most advanced surface treatment processes where generally a superior powder or wire material is deposited on the substrate to improve surface properties by using laser heat source. In this work, a physical model of the clad and the substrate has been presented. An attempt has been made to describe the simplified relation of temperature, stress and strain with time by using the established theoretical knowledge of generation of stress and strain after thermal treatment. The simplified relation of temperature, stress and strain with time has been explained with the help of schematic diagrams. The finding of this study will help to understand the temperature, stress and strain behaviour with time in the Laser Cladding process
Applicability of the orientation average formula in heavy-ion fusion reactions of deformed nuclei
In heavy-ion fusion reactions involving a well deformed nucleus, one often
assumes that the orientation of the target nucleus does not change during the
reaction. We discuss the accuracy of this procedure by analyzing the excitation
function of the fusion cross section and the fusion barrier distribution in the
reactions of Sm target with various projectiles ranging from C
to Ar. It is shown that the approximation gradually looses its accuracy
with increasing charge product of the projectile and target nuclei because of
the effects of finite excitation energy of the target nucleus. The relevance of
such inaccuracy in analyzing the experimental data is also discussed.Comment: 5 pages and 3 figure
Recommended from our members
Progress in Numerical Simulation of the Laser Cladding Process
Laser Cladding is one of the developing manufacturing techniques used for diverse applications such as coating, repairing and prototyping. Complex processing phenomena and the formation and growth of thin clad of few micrometers to millimeters range in most cases are yet to be fully understood. However, in recent past, several numerical models have been reported to get some understanding of physical, dynamic and metallurgical phenomena of this process. This article reviews the progress of numerical simulations spanning over three distinct stages of the process to model powder flow dynamics, melt pool and clad properties. For each stage, the governing equations, the effect of process variables and experimental validation techniques have been discussed. Specifically, we have outlined some of the underlying assumptions in the current numerical models which can act as pointers for further improvement of the existing numerical models. Authors recommend that numerical simulation results have to be complemented with experimental results to achieve better clad properties
Recommended from our members
Thermo-mechanical modelling to evaluate residual stress and material compatibility of laser cladding process depositing similar and dissimilar material on Ti6Al4V alloy
The formation of residual stresses due to thermo-mechanical effect and microstructural transformation in the Laser Cladding process predominantly affects the final product integrity and service life. A 3D finite element transient thermo-mechanical model has been developed to predict thermal profile and residual stress distribution for repair application of Ti6Al4V alloy using a moving heat source. Then the developed model was applied for the deposition of ceramic materials Al2O3 and TiC on Ti6Al4V alloy substrate. The outcome of this model is to predict temperature distribution, cooling rate, melt pool depth, heat affected zone and residual stress. This study mainly highlights the thermal effect on the residual stresses for similar and dissimilar clad/substrate materials and suggests the suitable cladding material with minimum residual stress
Strength Characteristics of Mortar Containing Different Sizes Glass Powder
A greater portion of nonrecyclable waste glass is accumulated on landfills creating a serious environmental
problem. Recent studies have been carried out to utilize the waste glass in construction as partial replacement of cement. This paper investigates the fineness properties of four sizes glass particles and strength characteristics of mortar in which cement is partially replaced with glass powder in the replacement level with 10%, 20%, 30% and 40%. Mortar cubes containing with varying particle sizes in the ranges of 212 μm, 75 μm, 63-38 μm and lower than 38 μm and in a water to cement ratio 0f 0.50 and 0.45 have been prepared. Room temperature and relative humidity have been maintained 32ºC and 90% respectively during the curing process. Replacement of 10% cement with glass powder reveals the higher compressive strength at 28days than other levels of replacement. The reduction in compressive strength increases with the level of cement replacement
- …