Hot electrons in low-dimensional phonon systems

A simple bulk model of electron-phonon coupling in metals has been surprisingly successful in explaining experiments on metal films that actually involve surface- or other low-dimensional phonons. However, by an exact application of this standard model to a semi-infinite substrate with a free surface, making use of the actual vibrational modes of the substrate, we show that such agreement is fortuitous, and that the model actually predicts a low-temperature crossover from the familiar T^5 temperature dependence to a stronger T^6 log T scaling. Comparison with existing experiments suggests a widespread breakdown of the standard model of electron-phonon thermalization in metals

INTEGRAL observation of the high-mass X-ray transient V 0332+53 during the 2005 outburst decline

The decline of the high mass X-ray transient V 0332+53 during the Dec. 2004 to Feb. 2005 outburst is analysed from the data recorded by INTEGRAL. The flux is shown to decrease exponentially until 2005 Feb. 10, with a decay time scale of ∼30 days above 20 keV and ∼20 days at lower energies, and to decrease linearly thereafter. The energy spectrum is well modelled throughout the decay by a power law with a folding energy of ∼7.5 keV, and with two cyclotron absorption features. The folding energy does not vary significantly over the decay, but the spectrum becomes harder with time. Most importantly, we show that the parameters describing the fundamental cyclotron line around 27 keV do vary with time: its energy and depth increase (by about 17% for the energy in ∼6 weeks), while its width decreases. These changes of the cyclotron line parameters are interpreted as resulting from a change in the extent of the cyclotron scattering region. Two quasi-periodic oscillations are also observed at various times during the observations, one at 0.05 Hz and another one near the pulsation frequency around 0.23 Hz

MaaSim: A Liveability Simulation for Improving the Quality of Life in Cities

Urbanism is no longer planned on paper thanks to powerful models and 3D simulation platforms. However, current work is not open to the public and lacks an optimisation agent that could help in decision making. This paper describes the creation of an open-source simulation based on an existing Dutch liveability score with a built-in AI module. Features are selected using feature engineering and Random Forests. Then, a modified scoring function is built based on the former liveability classes. The score is predicted using Random Forest for regression and achieved a recall of 0.83 with 10-fold cross-validation. Afterwards, Exploratory Factor Analysis is applied to select the actions present in the model. The resulting indicators are divided into 5 groups, and 12 actions are generated. The performance of four optimisation algorithms is compared, namely NSGA-II, PAES, SPEA2 and eps-MOEA, on three established criteria of quality: cardinality, the spread of the solutions, spacing, and the resulting score and number of turns. Although all four algorithms show different strengths, eps-MOEA is selected to be the most suitable for this problem. Ultimately, the simulation incorporates the model and the selected AI module in a GUI written in the Kivy framework for Python. Tests performed on users show positive responses and encourage further initiatives towards joining technology and public applications.Comment: 16 page

High temperature phases in the 0.98PbZrO3–0.02Pb(Ni1/3Nb2/3)O3 ceramic

The phase evolution with temperature in the 0.98PbZrO3–0.02Pb(Ni1/3Nb2/3)O3ceramic was investigated with dielectricpermittivity and polarization measurements, hot stage transmission electron microscopy, and high temperature x-ray diffraction. Below 190 °C, the ceramic is in the antiferroelectric phase with characteristic 14{110}csuperlatticediffractions. In this stage, typical antiferroelectric 180° domains were observed. Between 190 and 220 °C, an intermediate phase, which is characterized by 12{110}c-type superlatticediffractions, was detected. Evidences are found to suggest that this intermediate phase is ferroelectric. The 12{110}c-type superlatticediffraction persists even into the paraelectric phase above 220 °C. In addition, there exists an incommensurate phase between the low temperature antiferroelectric phase and the intermediate ferroelectric phase

Extreme Sensitivity of Superconductivity to Stoichiometry in FeSe (Fe1+dSe)

The recently discovered iron arsenide superconductors, which display superconducting transition temperatures as high as 55 K, appear to share a number of general features with high-Tc cuprates, including proximity to a magnetically ordered state and robustness of the superconductivity in the presence of disorder. Here we show that superconductivity in Fe1+dSe, the parent compound of the superconducting arsenide family, is destroyed by very small changes in stoichiometry. Further, we show that non-superconducting Fe1+dSe is not magnetically ordered down to low temperatures. These results suggest that robust superconductivity and immediate instability against an ordered magnetic state should not be considered as intrinsic characteristics of iron-based superconducting systems, and that Fe1+dSe may present a unique opportunity for determining which materials characteristics are critical to the existence of superconductivity in high Tc iron arsenide superconductors and which are not.Comment: Updated to reflect final version and include journal referenc

Evolution of Hard X-Ray Spectra Along the Branches in Cir X-1

Using the data from the PCA and HEXTE on board the RXTE satellite, we investigate the evolution of the 3-200 keV spectra of the peculiar low mass X-ray binary (LMXB) Cir X-1 along the branches on its hardness-intensity diagram (HID) from the vertical horizontal branch (VHB), through the horizontal horizontal branch (HHB) and normal branch (NB), to the flaring branch (FB). We detect a power-law hard component in the spectra. It is found that the derived photon indices ($\Gamma$) of the power-law hard component are correlated with the position on the HID. The power-law component dominates the X-ray emission of Cir X-1 in the energy band higher than $\sim 20$ keV. The fluxes of the power-law component are compared with those of the bremsstrahlung component in the spectra. A possible origin of the power-law hard component is discussed.Comment: 14 pages, 5 figures, ApJ Letter accepte

Nattokinase: A Promising Alternative in Prevention and Treatment of Cardiovascular Diseases

© The Author(s) 2018. Cardiovascular disease (CVD) is the leading cause of death in the world and our approach to the control and management of CVD mortality is limited. Nattokinase (NK), the most active ingredient of natto, possesses a variety of favourable cardiovascular effects and the consumption of Natto has been linked to a reduction in CVD mortality. Recent research has demonstrated that NK has potent fibrinolytic activity, antihypertensive, anti-atherosclerotic, and lipid-lowering, antiplatelet, and neuroprotective effects. This review covers the major pharmacologic effects of NK with a focus on its clinical relevance to CVD. It outlines the advantages of NK and the outstanding issues pertaining to NK pharmacokinetics. Available evidence suggests that NK is a unique natural compound that possesses several key cardiovascular beneficial effects for patients with CVD and is therefore an ideal drug candidate for the prevention and treatment of CVD. Nattokinase is a promising alternative in the management of CVD

Higher Order Acoustoelastic Lamb Wave Propagation in Stressed Plates

Residual stresses can be generated during fabrication processes, such as, welding, forging, rolling etc[1-3] . They have obvious influence on the performance of the material, like cracking and corrosion. To better control residual stresses, the initial distribution of them in materials must be clear. Ultrasonic methods can be used as a good tool for residual stress detection, and this approach is non-destructive and costs are modest. Methods which utilize longitudinal critically refracted (LCR) waves are receiving increased attention and it can be used on thick material. However, there have only been a limited number of studies which consider the acoustoelastic effect for thin plate materials which generate Lamb waves[4] . This paper reports a study in which a numerical model[5-6] is used to investigate the Lamb wave dispersion curves under loading that induce stresses. The effects of stress on various Lamb modes are discussed and those which appear to be most sensitive are identified. It is found that when the stress’s direction is the same with wave propagation direction in a 1 mm thick aluminum plate the A0 mode is the most sensitive to the applied stress

Mesoscopic Electron and Phonon Transport through a Curved Wire

There is great interest in the development of novel nanomachines that use charge, spin, or energy transport, to enable new sensors with unprecedented measurement capabilities. Electrical and thermal transport in these mesoscopic systems typically involves wave propagation through a nanoscale geometry such as a quantum wire. In this paper we present a general theoretical technique to describe wave propagation through a curved wire of uniform cross-section and lying in a plane, but of otherwise arbitrary shape. The method consists of (i) introducing a local orthogonal coordinate system, the arclength and two locally perpendicular coordinate axes, dictated by the shape of the wire; (ii) rewriting the wave equation of interest in this system; (iii) identifying an effective scattering potential caused by the local curvature; and (iv), solving the associated Lippmann-Schwinger equation for the scattering matrix. We carry out this procedure in detail for the scalar Helmholtz equation with both hard-wall and stress-free boundary conditions, appropriate for the mesoscopic transport of electrons and (scalar) phonons. A novel aspect of the phonon case is that the reflection probability always vanishes in the long-wavelength limit, allowing a simple perturbative (Born approximation) treatment at low energies. Our results show that, in contrast to charge transport, curvature only barely suppresses thermal transport, even for sharply bent wires, at least within the two-dimensional scalar phonon model considered. Applications to experiments are also discussed.Comment: 9 pages, 11 figures, RevTe