Theoretical study of VTOL tilt-nacelle axisymmetric inlet geometries

A systematic theoretical study of VTOL tilt-nacelle inlet design parameters is reported. The parameters considered are internal-lip contraction ratio, internal-lip major-to-minor axis ratio, diffuser-exit-area to throat-area ratio, maximum diffuser wall angle and shape. Each of the inlets was analyzed at the same given flow condition of free-stream velocity, angle between the free stream and centerline of the inlet, and diffuser-exit Mach number. The effects of these geometric parameters on surface static-pressure distribution, peak surface Mach number, diffusion velocity ratio, and tendency for the inlet flow to separate are presented

Computer programs for calculating two-dimensional potential flow through deflected nozzles

Computer programs to calculate the incompressible potential flow, corrected for compressibility, in two-dimensional nozzles at arbitrary operating conditions are presented. A statement of the problem to be solved, a description of each of the computer programs, and sufficient documentation, including a test case, to enable a user to run the program are included

Properties of Ruthenium Oxide Coatings

Ruthenium oxide coatings have been deposited on titanium substrates using a flood coating process. These films were heat treated for varying times and temperatures. The resulting films subsequently were characterized by performing resistivity and SEM analyses. Resistivity of the ruthenium oxide coating was found to be extremely dependent upon the firing temperature. Effect of the process conditions and formulations of the coatings on the morphology with respect to their electrical characteristics is presented. Capacitors were fabricated using plates coated with ruthenium oxide coatings. Capacitance versus heat treatment temperatures are discussed and at one firing temperature (480\u27C), the capacitance was 50 times the control capacitor value

Computer programs for calculating two-dimensional potential flow in and about propulsion system inlets

Incompressible potential flow calculations are presented that were corrected for compressibility in two-dimensional inlets at arbitrary operating conditions. Included are a statement of the problem to be solved, a description of each of the computer programs, and sufficient documentation, including a test case, to enable a user to run the program

Mind the gap: A review and recommendations for statistically evaluating Dual Systems models of adolescent risk behavior

According to Dual Systems models (Casey et al., 2008; Luna and Wright, 2016; Steinberg, 2008), a rapidly-developing socioemotional system and gradually-developing cognitive control system characterize adolescent brain development. The imbalance hypothesis forwarded by Dual Systems models posits that the magnitude of the imbalance between these two developing systems should predict the propensity for engaging in a variety of risk behaviors. The current integrative review argues that the excitement generated by the imbalance hypothesis and its implications for explaining adolescent risk behaviors has not been meet with equal efforts to rigorously test this hypothesis. The goal of the current review is to help guide the field to consider appropriate and rigorous methods of testing the imbalance hypothesis. First, we review the analytic approaches that have been used to test the imbalance hypothesis and outline statistical and conceptual limitations of these approaches. Next, we discuss the utility of two longitudinal analytic approaches (Latent Difference Scores and Growth Mixture Modeling) for testing the imbalance hypothesis. We utilize data from a large community adolescent sample to illustrate each approach and argue that Latent Difference Scores and Growth Mixture Modeling approaches enhance the specificity and precision with which the imbalance hypothesis is evaluated

Microstructural Stability of 9-12 Cr Steels at Elevated Temperatures

The objective of this report is to explore new substitutional solute solution (Cu, Co) and precipitate (TiC) hardening mechanisms for improved strength of 9-12 Cr martensitic steels

Adhesion Molecule Expression in Polymorphic Light Eruption

Endothelial leukocyte adhesion molecule-1 (ELAM-1), vascular cell adhesion molecule-1 (VCAM-1), and intercellular adhesion molecule-1 (ICAM-1) are cytokine-regulated cell-surface Ieukocyte adhesion molecules. We have investigated the in vivo kinetics and pattern of expression of these adhesion molecules in relation to tissue accumulation of leukocytes in the photodermatosis, polymorphic light eruption (PMLE), which is characterized by dense perivascular leukocytic infiltration. Immunohistology was performed on biopsies taken at varying time points from PMLE lesions induced in 11 subjects by suberythemal solar simulated irradiation. Vascular endothelial ELAM-1 expression was first observed at 5 h, maximal at 24 to 72 h, and remained elevated at 6 d. VCAM-1, minimally expressed in control skin, was induced above background levels on endothelium and some perivascular cells after 24h and maintained at 6 d. Endothelial cell ICAM-1 expression was increased above control levels at 72h and 6 d. Keratinocyte ICAM-1 expression, most marked overlying areas of dermal leukocytic infiltration, began at 5h and was strong at 72h and 6 d. In addition to lymphocytes, significant number of neutrophils of but not eosinophils were detected in the dermal leukocytic infiltrate that appeared at 5h and persisted at 6 d. The pattern of adhesion molecule expression that we have observed is similar to that seen in normal skin during a delayed hypersensitivity reaction: These observations support an immunologic basis for PMLE

Development of chromium-tungsten alloys

Cr alloys containing 0-30 weight % W were investigated for their high temperature strength and oxidation resistance. These experimental alloys are intended for use in elevated temperature applications. Alloys were melted in a water-cooled, copper-hearth arc furnace. Microstructure of the alloys was studied using X-ray diffraction, scanning electron microscopy, and light microscopy. Meyer and Vickers hardness tests were utilized for measuring room temperature strength. A hot hardness tester with a spherical ruby indenter was used to study the strength of these materials between 800ºC and 1200ºC. A parabolic relationship was observed between load and indent size at all temperatures. On the other hand, decrease in hardness of the alloys with temperature was linear up to 1200ºC

Microstructure of thin-wall ductile iron castings

Step plate castings with section thicknesses of 1.5 mm to 6 mm and individual (single) castings with section thicknesses of 2 mm to 6 mm were produced using a ductile iron chemistry. Microstructures of these thin wall ductal iron castings were characterized quantitatively using an image analyzer. Matrix structure (amount of pearlite, ferrite, and massive carbides) and graphite structure (volume fraction, nodule size, nodule content, and nodularity) were investigated as a function of section thickness. Pearlite content, nodule count, and nodularity increased with decreasing section thickness, whereas the nodule size decreased. Nodule content exceeded 2000 nodules per mm{sup 2} at the thinnest sections. Statistical analysis was performed to investigate the effect of casting parameters on the microstructure