4,265 research outputs found
Specific features of the charge and mass transfer in a silver-intercalated hafnium diselenide
The specific features of the charge transfer in intercalated samples of AgxHfSe2 have been studied for the first time by alternating current (ac) impedance spectroscopy. It has been found that relaxation processes in an ac field are accelerated with increasing silver content in the samples. The complex conductivity (Y) shows a frequency dispersion described by power law Y ∼ ωs, which is characteristic of the hopping conductivity mechanism. The AgxHfSe2 compounds demonstrate shorter relaxation times as compared to those observed in hafnium diselenide intercalated with copper atoms, and this fact indicates that the charge carrier mobility in the silver-intercalated compounds is higher. The possibility of silver ion transfer in AgxHfSe2 is confirmed by the measurements performed by the method of electrochemical cell emf. © 2013 Pleiades Publishing, Ltd
Transport properties and polarization phenomena in intercalated AgxHfSe2 compounds
The electrical properties of intercalated AgxHfSe2 compounds (x = 0. 1, 0. 2) have been investigated for the first time. Investigations have been performed using various current electrodes, which make it possible to pass either the electron current or the ion current across the sample. Polarization effects, which indicate the self-consistent migration of charge carriers in the samples, have been found for the samples at room temperature. Based on the characteristic features of polarization decay, coefficients of conjugated chemical diffusion have been evaluated. © 2013 Pleiades Publishing, Ltd
Intrinsic defects in silicon carbide LED as a perspective room temperature single photon source in near infrared
Generation of single photons has been demonstrated in several systems.
However, none of them satisfies all the conditions, e.g. room temperature
functionality, telecom wavelength operation, high efficiency, as required for
practical applications. Here, we report the fabrication of light emitting
diodes (LEDs) based on intrinsic defects in silicon carbide (SiC). To fabricate
our devices we used a standard semiconductor manufacturing technology in
combination with high-energy electron irradiation. The room temperature
electroluminescence (EL) of our LEDs reveals two strong emission bands in
visible and near infrared (NIR), associated with two different intrinsic
defects. As these defects can potentially be generated at a low or even single
defect level, our approach can be used to realize electrically driven single
photon source for quantum telecommunication and information processing
Pseudobinary Fe4Ti3S8 compound with a NiAs-type structure: Effect of Ti for Fe substitution
The transition metal sulfide Fe4Ti3S8 with 7:8 composition has been synthesized and studied by using X-ray diffraction, magnetization and electrical resistivity measurements. This compound exhibits a monoclinic crystal lattice (space group I12/m1). The substitution of Ti for Fe in Fe7S8 is found to result in a lowering of the Curie temperature (TC ≈ 205 K), in a larger value of the coercive field (Hc ∼ 9 kOe at low temperatures) and in a substantial growth of the resultant magnetic moment per formula unit (μFU) in comparison with Fe7S8. An enhanced value of μFU is attributed to the preferential substitution of Ti in alternating cation layers. From the paramagnetic susceptibility measured within temperature interval (250-350) K, a reduced value of the effective moment per iron (μFe ∼ 2.4μB) was determined. The electrical resistivity of Fe4Ti3S8 shows a non-metallic behavior and is affected by magnetic ordering. © 2013 Elsevier Masson SAS. All rights reserved
Room-temperature near-infrared silicon carbide nanocrystalline emitters based on optically aligned spin defects
Bulk silicon carbide (SiC) is a very promising material system for
bio-applications and quantum sensing. However, its optical activity lies beyond
the near infrared spectral window for in-vivo imaging and fiber communications
due to a large forbidden energy gap. Here, we report the fabrication of SiC
nanocrystals and isolation of different nanocrystal fractions ranged from 600
nm down to 60 nm in size. The structural analysis reveals further fragmentation
of the smallest nanocrystals into ca. 10-nm-size clusters of high crystalline
quality, separated by amorphization areas. We use neutron irradiation to create
silicon vacancies, demonstrating near infrared photoluminescence. Finally, we
detect, for the first time, room-temperature spin resonances of these silicon
vacancies hosted in SiC nanocrystals. This opens intriguing perspectives to use
them not only as in-vivo luminescent markers, but also as magnetic field and
temperature sensors, allowing for monitoring various physical, chemical and
biological processes.Comment: 5 pages, 4 figure
Excitation and coherent control of spin qudit modes with sub-MHz spectral resolution
Quantum bit or qubit is a two-level system, which builds the foundation for
quantum computation, simulation, communication and sensing. Quantum states of
higher dimension, i.e., qutrits (D = 3) and especially qudits (D = 4 or
higher), offer significant advantages. Particularly, they can provide
noise-resistant quantum cryptography, simplify quantum logic and improve
quantum metrology. Flying and solid-state qudits have been implemented on the
basis of photonic chips and superconducting circuits, respectively. However,
there is still a lack of room-temperature qudits with long coherence time and
high spectral resolution. The silicon vacancy centers in silicon carbide (SiC)
with spin S = 3/2 are quite promising in this respect, but until now they were
treated as a canonical qubit system. Here, we apply a two-frequency protocol to
excite and image multiple qudit modes in a SiC spin ensemble under ambient
conditions. Strikingly, their spectral width is about one order of magnitude
narrower than the inhomogeneous broadening of the corresponding spin resonance.
By applying Ramsey interferometry to these spin qudits, we achieve a spectral
selectivity of 600 kHz and a spectral resolution of 30 kHz. As a practical
consequence, we demonstrate absolute DC magnetometry insensitive to thermal
noise and strain fluctuations
Zero-field ODMR and relaxation of Si-vacancy centers in 6H-SiC
Silicon vacancies in silicon carbide (SiC) have been proposed as interesting candidates for quantum technology applications such as quantum sensing and quantum repeaters. SiC exists in many polytypes with different plane stacking sequences, and in each polytype, the vacancies can occupy a variety of different lattice sites. In this work, we focus on the three important charged silicon vacancies in the 6H-SiC polytype. We record the photoluminescence and continuous-wave optically detected magnetic resonance (ODMR) spectra at different radio-frequency power levels and different temperatures. We individually select the zero-phonon lines of the different silicon vacancies at low temperatures and record the corresponding ODMR spectra. ODMR allows us to correlate optical and magnetic resonance spectra and thereby separate signals from V1 and V3. The results also explain the observed sign change of the ODMR signal as a function of temperature
The CCFM Monte Carlo generator CASCADE 2.2.0
CASCADE is a full hadron level Monte Carlo event generator for ep, \gamma p
and p\bar{p} and pp processes, which uses the CCFM evolution equation for the
initial state cascade in a backward evolution approach supplemented with off -
shell matrix elements for the hard scattering. A detailed program description
is given, with emphasis on parameters the user wants to change and variables
which completely specify the generated events
- …