Detailed investigation of a vaporising fuel spray. Part 1: Experimental investigation of time averaged spray

A laser tomographic light scattering technique provides rapid and accurate high resolution measurements of droplet sizes, concentrations, and vaporization. Measurements using a computer interfaced thermocouple are presented and it is found that the potential exists for separating gas and liquid temperature measurements and diagnosing local spray density by in situ analysis of the response characteristics of the thermocouple. The thermocouple technique provides a convenient means for measuring mean gas velocity in both hot and cold two phase flows. The experimental spray is axisymmetric and has carefully controlled initial and boundary conditions. The flow is designed to give relatively insignificant transfer of momentum and mass from spray to air flow. The effects of (1) size-dependent droplet dispersion by the turbulence, (2) the initial spatial segregation of droplet sizes during atomization, and (3) the interaction between droplets and coherent large eddies are diagnosed

Flavin mononucleotide: the coenzyme of reduced diphosphopyridine nucleotide dehydrogenase

This article does not have an abstract

Movements of bocaccio (Sebastes paucispinis) and greenspotted (S. chlorostictus) rockfishes in a Monterey submarine canyon: implications for the design of marine reserves

In August and September of 1997 and 1998, we used SCUBA techniques to surgically implant Vemco V16 series acoustic transmitters in 6 greenspotted rockfish (Sebastes chlorostictus) and 16 bocaccio (S. paucispinis) on the flank of Soquel Canyon in Monterey Bay, California. Fish were captured at depths of 100–200 m and reeled up to a depth of approximately 20 m, where a team of SCUBA divers anesthetized and surgically implanted acoustic transmitters in them. Tagged fish were released on the seafloor at the location of catch. An array of recording receivers on the seafloor enabled the tracking of horizontal and vertical fish movements for a three-month period. Greenspotted rockfish tagged in 1997 exhibited almost no vertical movement and showed limited horizontal movement. Two of these tagged fish spent more than 90% of the time in a 0.58-km2 area. Three other tagged greenspotted rockfish spent more than 60% of the time in a 1.6-km2 area but displayed frequent horizontal movements of at least 3 km. Bocaccio exhibited somewhat greater movements. Of the 16 bocaccio tagged in 1998, 10 spent less than 10% of the time in the approximately 12-km2 study area. One fish stayed in the study area for about 50% of the study time. Signals from the remaining 5 fish were recorded in the study area the entire time. Bocaccio frequently moved vertically 10–20 m and occasionally displayed vertical movements of 100 m or greater

Cost Analysis In A Multi-Mission Operations Environment

Spacecraft control centers have evolved from dedicated, single-mission or single missiontype support to multi-mission, service-oriented support for operating a variety of mission types. At the same time, available money for projects is shrinking and competition for new missions is increasing. These factors drive the need for an accurate and flexible model to support estimating service costs for new or extended missions; the cost model in turn drives the need for an accurate and efficient approach to service cost analysis. The National Aeronautics and Space Administration (NASA) Huntsville Operations Support Center (HOSC) at Marshall Space Flight Center (MSFC) provides operations services to a variety of customers around the world. HOSC customers range from launch vehicle test flights; to International Space Station (ISS) payloads; to small, short duration missions; and has included long duration flagship missions. The HOSC recently completed a detailed analysis of service costs as part of the development of a complete service cost model. The cost analysis process required the team to address a number of issues. One of the primary issues involves the difficulty of reverse engineering individual mission costs in a highly efficient multimission environment, along with a related issue of the value of detailed metrics or data to the cost model versus the cost of obtaining accurate data. Another concern is the difficulty of balancing costs between missions of different types and size and extrapolating costs to different mission types. The cost analysis also had to address issues relating to providing shared, cloud-like services in a government environment, and then assigning an uncertainty or risk factor to cost estimates that are based on current technology, but will be executed using future technology. Finally the cost analysis needed to consider how to validate the resulting cost models taking into account the non-homogeneous nature of the available cost data and the decreasing flight rate. This paper presents the issues encountered during the HOSC cost analysis process, and the associated lessons learned. These lessons can be used when planning for a new multi-mission operations center or in the transformation from a dedicated control center to multi-center operations, as an aid in defining processes that support future cost analysis and estimation. The lessons can also be used by mature serviceoriented, multi-mission control centers to streamline or refine their cost analysis process

Individualization of piperacillin dosing for critically ill patients: Dosing software to optimize antimicrobial therapy

Piperacillin-tazobactam is frequently used for empirical and targeted therapy of infections in critically ill patients. Considerable pharmacokinetic (PK) variability is observed in critically ill patients. By estimating an individual's PK, dosage optimization Bayesian estimation techniques can be used to calculate the appropriate piperacillin regimen to achieve desired drug exposure targets. The aim of this study was to establish a population PK model for piperacillin in critically ill patients and then analyze the performance of the model in the dose optimization software program BestDose. Linear, with estimated creatinine clearance and weight as covariates, Michaelis-Menten (MM) and parallel linear/MM structural models were fitted to the data from 146 critically ill patients with nosocomial infection. Piperacillin concentrations measured in the first dosing interval, from each of 8 additional individuals, combined with the population model were embedded into the dose optimization software. The impact of the number of observations was assessed. Precision was assessed by (i) the predicted piperacillin dosage and by (ii) linear regression of the observed-versus-predicted piperacillin concentrations from the second 24 h of treatment. We found that a linear clearance model with creatinine clearance and weight as covariates for drug clearance and volume of distribution, respectively, best described the observed data. When there were at least two observed piperacillin concentrations, the dose optimization software predicted a mean piperacillin dosage of 4.02 g in the 8 patients administered piperacillin doses of 4.00 g. Linear regression of the observed-versus-predicted piperacillin concentrations for 8 individuals after 24 h of piperacillin dosing demonstrated an r2 of > 0.89. In conclusion, for most critically ill patients, individualized piperacillin regimens delivering a target serum piperacillin concentration is achievable. Further validation of the dosage optimization software in a clinical trial is required. Copyrigh

Cricket fast bowling technique and lumbar bone stress injury

Introduction: Lumbar bone stress injuries (LBSI) are the most prevalent injury in cricket. While fast bowling technique has been implicated in the aetiology of LBSI, no previous study has attempted to prospectively analyse fast bowling technique and its relationship to LBSI. The aim of this study was to explore technique differences between elite cricket fast bowlers with and without subsequent LBSI. Methods: Kinematic and kinetic technique parameters previously associated with LBSI were determined for 50 elite male fast bowlers. Group means were compared using independent samples t-tests to identify differences between bowlers with and without a prospective LBSI. Significant parameters were advanced as candidate variables for a binary logistic regression analysis. Results: Of the 50 bowlers, 39 sustained a prospective LBSI. Significant differences were found between injured and non-injured bowlers in: rear knee angle, rear hip angle, thoracolumbar side flexion angle and thoracolumbar rotation angle at back foot contact (BFC); the front hip angle, pelvic tilt orientation and lumbopelvic angle at front foot contact (FFC); the thoracolumbar side flexion angle at ball release and the maximum front hip angle and ipsilateral pelvic drop orientation. A binary logistic model, consisting of rear hip angle at BFC and lumbopelvic angle at FFC, correctly predicted 88% of fast bowlers according to injury history and significantly increased the odds of sustaining an LBSI (odds ratio: 0.88 and 1.25 respectively). Conclusion: Lumbopelvic motion is implicated in the aetiology of LBSI in fast bowling with inadequate lumbo-pelvi-femoral complex control a potential cause. This research will aid the identification of fast bowlers at risk of LBSI, as well as enhancing coaching and rehabilitation of fast bowlers from LBSI

The effect of cognitive task complexity on healthy gait in the walking Corsi test

Dual-task activities are essential within everyday life, requiring visual–spatial memory (VSM) and mobility skills. Navigational memory is an important component of VSM needed to carry out everyday activities, but this is often not included in traditional tests such as the Corsi block tapping test (CBT). The Walking Corsi Test (WalCT) allows both VSM and navigational memory to be tested together, as well as allowing measures of gait to be collected, thus providing a more complete understanding of dual-task function. The aim of this study was to investigate the effect of an increasingly complex cognitive task on gait in a healthy adult population, using the WalCT and body-worn inertial measurement unit (IMU) sensors. Participants completed both the CBT and WalCT, where they were asked to replicate increasingly complex sequences until they were no longer able to carry this out correctly. IMU sensors were worn on the shins throughout the WalCT to assess changes in gait as task complexity increased. Results showed that there were significant differences in several gait parameters between completing a relatively simple cognitive task and completing a complex task. The type of memory used also appeared to have an impact on some gait variables. This indicates that even within a healthy population, gait is affected by cognitive task complexity, which may limit function in everyday dual-task activities