Optical far infrared properties of PtSb2

Far infrared reflection spectra measured at room temperature were used to investigate vibrational properties of PtSb2 single crystals. The experimental results were analyzed using a dielectric function taking into account the existence of plasmonionised impurity-phonon interactions. Together with strong coupling three infrared active lattice modes at about 143, 187 and 202 cm-1 were observed. These results were discussed with respect to calculated literature vibrational frequencies. Electrical properties of single crystal PtSb2 were also measured at room temperature

The CMS Tracker Readout Front End Driver

The Front End Driver, FED, is a 9U 400mm VME64x card designed for reading out the Compact Muon Solenoid, CMS, silicon tracker signals transmitted by the APV25 analogue pipeline Application Specific Integrated Circuits. The FED receives the signals via 96 optical fibers at a total input rate of 3.4 GB/sec. The signals are digitized and processed by applying algorithms for pedestal and common mode noise subtraction. Algorithms that search for clusters of hits are used to further reduce the input rate. Only the cluster data along with trigger information of the event are transmitted to the CMS data acquisition system using the S-LINK64 protocol at a maximum rate of 400 MB/sec. All data processing algorithms on the FED are executed in large on-board Field Programmable Gate Arrays. Results on the design, performance, testing and quality control of the FED are presented and discussed

Optical far infrared properties of FeS2

In this paper are presented the far-infrared reflectivity spectra for a cleaved FeS 2 sample measured at roam temperature and at 77 K

Far infrared and photoacoustic characterization of iodine doped PbTe

Single crystal samples of PbTe doped with PbI2 were made using the Bridgman technique. Far infrared reflectivity diagrams of PbTe doped with 0.4 at% and 0.6 at% Iodine were measured and numerically analyzed. A plasma resonance at about 650 cm(-1) with the reflectivity minima very close to zero was observed for both samples. Thermal diffusivity was determined for the same samples using the photoacoustic method with a transmission detection configuration and the values of the minority free carrier (holes) mobility were calculated

Far infrared properties of sintered PbTe doped with boron

Far infrared spectra of sintered PbTe doped with boron were analyzed. The measured infrared spectra were fated using a modified plasmon-phonnon interaction model with two additional oscillators (at about 195 cm(-1) and 285 cm(-1)) representing local B-impurity modes. The obtained results were compared with previously published data for a single crystal PbTe sample doped with boron

Far infrared properties of sintered PbTe doped with boron

Far infrared spectra of sintered PbTe doped with boron were analyzed. The measured infrared spectra were fitted using a modified plasmon-phonnon interaction model with two additional oscillators (at about 195 cm-1 and 285 cm-1) representing local B-impurity modes. The obtained results were compared with previously published data for a single crystal PbTe sample doped with boron

Probing the Roughness of Porphyrin Thin Films with X-ray Photoelectron Spectroscopy

Thin-film growth of molecular systems is of interest for many applications, such as for instance organic electronics. In this study, we demonstrate how X-ray photoelectron spectroscopy (XPS) can be used to study the growth behavior of such molecular systems. In XPS, coverages are often calculated assuming a uniform thickness across a surface. This results in an error for rough films, and the magnitude of this error depends on the kinetic energy of the photoelectrons analyzed. We have used this kinetic-energy dependency to estimate the roughnesses of thin porphyrin films grown on rutile TiO2(110). We used two different molecules: cobalt (II) monocarboxyphenyl-10,15,20-triphenylporphyrin (CoMCTPP), with carboxylic-acid anchor groups, and cobalt (II) tetraphenylporphyrin (CoTPP), without anchor groups. We find CoMCTPP to grow as rough films at room temperature across the studied coverage range, whereas for CoTPP the first two layers remain smooth and even; depositing additional CoTPP results in rough films. Although, XPS is not a common technique for measuring roughness, it is fast and provides information of both roughness and thickness in one measurement.Fil: Kataev, Elmar. Universitat Erlangen-Nuremberg; AlemaniaFil: Wechsler, Daniel. Universitat Erlangen-Nuremberg; AlemaniaFil: Williams, Federico José. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Química, Física de los Materiales, Medioambiente y Energía. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Química, Física de los Materiales, Medioambiente y Energía; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Departamento de Química Inorgánica, Analítica y Química Física; ArgentinaFil: Köbl, Julia. Universitat Erlangen-Nuremberg; AlemaniaFil: Tsud, Natalia. Karlova Univerzita (cuni); República ChecaFil: Franchi, Stefano. Istituto di Struttura della Materia; Italia. Consiglio Nazionale delle Ricerche; ItaliaFil: Steinruck, Hans Peter. Universitat Erlangen-Nuremberg; AlemaniaFil: Lytken, Ole. Universitat Erlangen-Nuremberg; Alemani

Far infrared and photoacoustic characterization of iodine doped PbTe

Single crystal samples of PbTe doped with PbI2 were made using the Bridgman technique. Far infrared reflectivity diagrams of PbTe doped with 0.4 at% and 0.6 at% Iodine were measured and numerically analyzed. A plasma resonance at about 650 cm(-1) with the reflectivity minima very close to zero was observed for both samples. Thermal diffusivity was determined for the same samples using the photoacoustic method with a transmission detection configuration and the values of the minority free carrier (holes) mobility were calculated

Socially assistive robots in health and social care: acceptance and cultural factors. Results from an exploratory international online survey

Aim: This study explored the views of an international sample of registered nurses and midwives working in health and social care concerning socially assistive robots (SARs), and the relationship between dimensions of culture and rejection of the idea that SARs had benefits in these settings. Methods: An online survey was used to obtain rankings of (among other topics) the extent to which SARs have benefits for health and social care. It also asked for free text responses regarding any concerns about SARs. Results: Most respondents were overwhelmingly positive about SARs' benefits. A small minority strongly rejected this idea, and qualitative analysis of the objections raised by them revealed three major themes: things might go wrong, depersonalization, and patient‐related concerns. However, many participants who were highly accepting of the benefits of SARs expressed similar objections. Cultural dimensions of long‐term orientation and uncertainty avoidance feature prominently in technology acceptance research. Therefore, the relationship between the proportion of respondents from each country who felt that SARs had no benefits and each country's ratings on long‐term orientation and uncertainty avoidance were also examined. A significant positive correlation was found for long‐term orientation, but not for uncertainty avoidance. Conclusion: Most respondents were positive about the benefits of SARs, and similar concerns about their use were expressed both by those who strongly accepted the idea that they had benefits and those who did not. Some evidence was found to suggest that cultural factors were related to rejecting the idea that SARs had benefits