Effects of ethanol on membrane lipids III. Quantitative changes in lipid and fatty acid composition of nonpolar and polar lipids of mouse total liver, mitochondria and microsomes following ethanol feeding

The effects of ethanol on the total, nonpolar, and polar lipids of whole liver, mitochondria, and microsomes have been evaluated. Differences in the fatty acid composition of various lipid subclasses have been compared in control and ethanol treated mice. On the whole polyunsaturated fatty acids, especially arachidonic (20∶4) and docosahexaenoic (22∶6), were found to decrease. The significance of an enzymatic mechanism vs. a peroxidative mechanism to explain the results is discussed. Decreases also were observed in the ratios of arachidonate/linoleate following ethanol feeding. These changes are thought to be associated with decreases in the activity of the chain elongation‐desaturation system.Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/141242/1/lipd0722.pd

Plasma ACTH, α-MSH and cortisol variations in the dog during the oestrous cycle in different photoperiods

The hypothalamic-pituitary-adrenal axis (HPA) is a complex system regulated by multiple factors.Sexual dimorphism of this axis has been described in different species under physiological conditions and it hasbeen proposed that sexual hormones could have an effect on it. There are only a few reports about sex-linkedvariations in HPA axis hormones in the dog. Thus, studying the impact of sexual hormones on the HPA axis wouldbroaden the knowledge about its function in this species. Therefore, the objective of this study was to determinewhether there are variations in HPA plasma hormones (ACTH, alfa-melanocyte-stimulating hormone [α-MSH]and cortisol) according to the sex and photoperiod (positive or negative photoperiod were considered when theduration of the light hours of the day was more than 12 or less than 12, respectively) under basal conditions (likeanoestrus) and throughout the oestrous cycle in the female dog. The population under study consisted of 11 intactfemale and 14 intact male dogs. Under basal conditions neither ACTH nor α-MSH concentrations showed differencesbetween sexes and different photoperiods. Cortisol showed greater values in the negative photoperiod thanin the positive, both in females and males (P = 0.03 and P = 0.015, respectively). Throughout the oestrous cycle,all the studied hormones showed variations (P < 0.0001). The greatest concentrations of ACTH were observed atproestrus, while α-MSH and cortisol showed their greatest concentrations at oestrus. The three hormones decreasedin diestrus. ACTH and cortisol concentrations were higher in the negative photoperiod (P = 0.04 and P < 0.0001,respectively), while α-MSH concentrations were higher in the positive photoperiod (P = 0.012). In the group offemales oestradiol and progesterone correlated with ACTH (r = 0.75, P < 0.0001; r = 0.34, P < 0.01, respectively),α-MSH (r = 0.49, P < 0.0001; r = 0.52, P < 0.0001, respectively) and cortisol (r = 0.33, P < 0.01; r = 0.5, P < 0.0001,respectively). These results show that in females, HPA axis hormones vary during the oestrous cycle in relation tooestradiol and progesterone fluctuations. The ACTH, α-MSH and cortisol concentrations also showed differencesbetween photoperiods in females, but only cortisol did so in males. These findings suggest that sexual hormonescould have an effect on the HPA axis. Further research needs to be done to fully understand this interaction andthe mechanisms involved.Fil: Gallelli, María Florencia. Universidad de Buenos Aires. Facultad de Ciencias Veterinarias; ArgentinaFil: Monachesi, N.. Universidad de Buenos Aires. Facultad de Ciencias Veterinarias; ArgentinaFil: Miceli, Diego Daniel. Consejo Nacional de Investigaciones Científicas y Técnicas. Instituto de Biología y Medicina Experimental. Fundación de Instituto de Biología y Medicina Experimental. Instituto de Biología y Medicina Experimental; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Veterinarias; ArgentinaFil: Cabrera Battler, M. F.. Universidad de Buenos Aires. Facultad de Ciencias Veterinarias; ArgentinaFil: Gomez, N. V.. Universidad de Buenos Aires. Facultad de Ciencias Veterinarias; ArgentinaFil: Meikle, A.. Universidad de Montevideo; UruguayFil: Castillo, V, A.. Universidad de Buenos Aires. Facultad de Ciencias Veterinarias; Argentin

Should Tort Damages Be Multiplied?

The notion that damages should be multiplied by the reciprocal of the probability of punishment is one of the basic lessons of the law and economics literature. However, the simple l/p multiplier turns out be inapplicable in the civil damages setting. The multiplier that brings about first-best deterrence must be chosen by striking a balance between the supply of lawsuits and the need to internalize costs. Moreover, given the costs of litigation, a multiplier that minimizes overall social costs (in contrast to achieving first-best deterrence) may need to be set at a level that effectively bars many claims. This article derives optimal damage multipliers for a costly civil litigation system and examines the conflicting implications of deterrence and social cost minimization as objectives in the design of an optimal multiplier. An empirical application suggests that the first-best deterrence multiplier for the tort system is roughly equal to two

Association between one-hour post-load plasma glucose levels and vascular stiffness in essential hypertension

Objectives: Pulse wave velocity (PWV) is a surrogate end-point for cardiovascular morbidity and mortality. A plasma glucose value $155 mg/dl for the 1-hour post-load plasma glucose during an oral glucose tolerance test (OGTT) is able to identify subjects with normal glucose tolerance (NGT) at high-risk for type-2 diabetes (T2D) and for subclinical organ damage. Thus, we addressed the question if 1-hour post-load plasma glucose levels, affects PWV and its central hemodynamic correlates, as augmentation pressure (AP) and augmentation index (AI). Methods: We enrolled 584 newly diagnosed hypertensives. All patients underwent OGTT and measurements of PWV, AP and AI. Insulin sensitivity was assessed by Matsuda-index. Results: Among participants, 424 were NGT and 160 had impaired glucose tolerance (IGT). Of 424 NGT, 278 had 1-h postload plasma glucose ,155 mg/dl (NGT,155) and 146 had 1-h post-load plasma glucose$155 mg/dl (NGT$155). NGT$155 had a worse insulin sensitivity and higher hs-CRP than NGT,155, similar to IGT subjects. In addition, NGT $155 in comparison with NGT,155 had higher central systolic blood pressure (134612 vs 131610 mmHg), as well as PWV (8.463.7 vs 6.761.7 m/s), AP (12.567.1 vs 9.865.7 mmHg) and AI (29.4611.9 vs 25.1612.4 regression analysis, 1-h post-load plasma glucose resulted the major determinant of all indices of vascular stiffness. Conclusion: Hypertensive NGT$155 subjects, compared with NGT,155, have higher PWV and its hemodynamic correlates that increase their cardiovascular risk profile

Application of a Multiphase Interleaved DC-DC Converter for Power-To-Hydrogen Systems

Power electronics plays a crucial role in the implementation of a clean hydrogen production system, whose last stage consists of a water electrolyzer requiring a DC power supply to be in operation. The most recent architectural solutions imply the use of an isolated DC-DC converter, collecting energy from medium voltage (MV) and delivering it to the electrolyzer. An equivalent electrical model of the electrolyzer is therefore needed, as well as an accurate design of the power converter stage, aiming at a high-efficiency operation of the electrolyzer's cells and at a low-ripple supply current, to avoid premature degradation. This work investigates a full-bridge step-down isolated DC-DC converter, focusing on the opportunity of a multiphase interleaved configuration, particularly convenient for the proposed application. The considered maximum power level is 400 kW, representing a small-scale example of an industrial water electrolyzer supplied by a maximum DC voltage of 700 V. Input DC voltage is 7 kV. Power electronics' simulation have been carried out, as well as model analysis of the proposed converter

Automotive Battery Charging based on Efficient Capacitive Power Transfer

Isolated power converters find application in different fields of electric mobility, such as battery charging, where galvanic insulation between on-board storage system and electrical grid is required. Conventional isolated systems are based on the use of transformers, which have the drawback to be bulky and expensive. Nevertheless, insulation implemented by capacitances can be attractive due to the recent technological advances, contributing to increasingly compact, cheap and efficient converters. In this paper, an isolated power converter based on capactive power transfer (CPT), along with the switched capacitor concept, is proposed. GaN FETs are employed as switching power devices in order to handle high operation frequencies with limited power losses. In this work a 500 kHz switching frequency has been selected, with notable benefits brought to the overall power converter in terms of compactness. The developed prototype has been experimentally tested according to a target power level of 3 kW, to prove the proper operation of the proposed converter. The experimental tests have demonstrated a power transfer efficiency as high as 95%

Microbiological investigation of Raphanus sativus L. grown hydroponically in nutrient solutions contaminated with spoilage and pathogenic bacteria

The survival of eight undesired (spoilage/pathogenic) food related bacteria (Citrobacter freundii PSS60, Enterobacter spp. PSS11, Escherichia coli PSS2, Klebsiella oxytoca PSS82, Serratia grimesii PSS72, Pseudomonas putida PSS21, Stenotrophomonas maltophilia PSS52 and Listeria monocytogenes ATCC 19114T) was investigated in mineral nutrient solution (MNS) during the crop cycle of radishes (Raphanus sativus L.) cultivated in hydroponics in a greenhouse. MNSs were microbiologically analyzed weekly by plate count. The evolution of the pure cultures was also evaluated in sterile MNS in test tubes. The inoculated trials contained an initial total mesophilic count (TMC) ranging between 6.69 and 7.78 Log CFU/mL, while non-sterile and sterile control trials showed levels of 4.39 and 0.97 Log CFU/mL, respectively. In general, all inoculated trials showed similar levels of TMC in MNS during the experimentation, even though the levels of the inoculated bacteria decreased. The presence of the inoculums was ascertained by randomly amplified polymorphic DNA (RAPD) analysis applied on the isolates collected at 7-day intervals. At harvest, MNSs were also analyzed by denaturing gradient gel electrophoresis (DGGE). The last analysis, except P. putida PSS21 in the corresponding trial, did not detect the other bacteria, but confirmed that pseudomonads were present in un-inoculated MNSs. Despite the high counts detected (6.44 and 7.24 CFU/g), only C. freundii PSS60, Enterobacter spp. PSS11 and K. oxytoca PSS82 were detected in radishes in a living form, suggesting their internalization

A quasi-Z-source-based inductive power transfer system for constant current/constant voltage charging applications

This article proposes a quasi-Z-source (qZS)-based Inductive Power Transfer (IPT) system for Electric Vehicles (EVs) charging applications. The IPT systems use the magnetic field to transfer power between two coils wirelessly, achieving improved reliability, safety and less environmental impact. Compared to the conventional IPT system, the proposed qZS-IPT system simultaneously achieves DC/DC regulation and DC/AC conversion through a single-stage conversion, thus lowering the cost and complexity of the system. Moreover, the reliability of the system is improved thanks to the qZS network shoot-though immunity and the reduced number of switches. To ensure the battery efficient charging and long service life, the constant current/constant voltage (CC/CV) method is considered. With the proposed innovative modulation scheme, the qZS can easily change between buck and boost modes, respectively, lowering or increasing the secondary side current. A theoretical analysis is presented for system design. Simulation results based on a 25 kW (200 V/135 A) low duty EV charger are presented to verify the effectiveness of the proposed scheme. Experimental tests are performed on a 150 W scale-down prototype to validate the analysis and demonstrate the effectiveness of the proposed qZS-IPT system for CC/CV chargers

Water activated ionic conduction in cross-linked polyelectrolytes

The electrical properties of polyelectrolytes depend on the water concentration of the environment. The behaviour of both conductance and capacitance caused by variations in relative humidity and temperature was investigated by impedance spectroscopy for humidity sensors based on an interpenetrated network of a polymer and a polyelectrolyte. The results were interpreted on the base of the Langmuir and Kelvin equations and two different sensing mechanisms were highlighted for low and high water content