238 research outputs found
Effect of acupressure on cervical ripening
Background: Cervical ripening is one of the main stages of initiation labor. Acupressure in Chinese medicine is considered as an invasive technique, which through reliving oxytocin ripens the cervix. Acupoint Sanyinjiao (SP6) was selected in this study because it is the acupoint selected in gynecology and it is easy for women to locate and apply pressure without medical assistance. Objectives: The aim of this study was to determine the effect of acupressure on cervical ripening. Patients and Methods: In this randomized clinical trial, 150 primigravida with term pregnancy who had referred to Deziani hospital in Gorgan were chosen and divided to three groups: in the first group acupressure was done by the researcher while in the second groups this was performed by the mother her self, and the third group served as a control and only received routine care. For both intervention groups the pressure was applied on Sp6 for about 20 minutes during one to five days. Elements were checked from cervical ripening at 48 and 96 hours after intervention and at the time of hospitalization. The tools for gathering information included demographic characteristics and midwifery history questionnaire, daily records and follow up forms. Content validity was used for validity of tools. Reliability of the observation check-list and physical examination was confirmed by inter-rater scores (inter observer), and daily records by test-re-test. Data was analyzed by analysis of variance (ANOVA), Kruskal-Wallis and Chi-squared tests (P ≤ 0.05). Results: There was a significant difference between mothers’ educations in the three groups. Most of the mothers (59.5%) in the researcher-performed acupressure group had secondary education. Cervical ripening was significantly different between the three groups after 48 hours (P ≤ 0.05), yet there was no significant difference after 96 hours and at the time of admission. Mean Bishop score was enhanced after 48 hours in the researcher-performed acupressure group (P ≤ 0.021) and the self-performed acupressure group (P ≤ 0.007) in comparison to the control group. Conclusions: The results showed that acupressure is a safe technique and leads to cervical ripening. Thus, regarding the desired results that were achieved when mothers applied acupressure themselves, it could be suggested that it is beneficial for mothers to be trained to apply this method at home. © 2015, Iranian Red Crescent Medical Journal
Complementary spiral resonators for ultrawideband suppression of simultaneous switching noise in high-speed circuits
Cataloged from PDF version of article.In this paper, a novel concept for ultra-wideband simultaneous switching noise (SSN)
mitigation in high-speed printed circuit boards (PCBs) is proposed. Using complementary spiral
resonators (CSRs) etched on only a single layer of the power plane and cascaded co-centrically
around the noise port, ultra-wideband SSN suppression by 30 dB is achieved in a frequency span
ranging from 340 MHz to beyond 10 GHz. By placing a slit in the co-centric rings, lower cut-off
frequency is reduced to 150 MHz, keeping the rest of the structure unaltered. Finally, the power plane
structure with modified complementary spiral resonators (MCSRs) is designed, fabricated, and evaluated
experimentally. Measurement and simulation results are in well-agreement
Barriers, Challenges, and Benefits: Gender Diversity in Technology-Based New Venture Team Innovation
This paper introduces the early phase of research designed to unpack the phenomenon of gender diversity in technology new venture teams including its barriers, potential benefits, and challenges. We present some preliminary case study findings from 13 interviews with team members from three technology new ventures in Indonesia. This research setting allows us to investigate a unique cultural context in a developing country. The present study addresses a significantresearch gap by elucidating various viewpoints of new ventures towards gender diversity within the same institutional context, thereby enabling a nuanced understanding of their ability to leverage the potential benefits of gender-diverse teams for innovation. Specifically, our findings reveal that new ventures have different abilities to navigate the barriers and challenges associated with gender diversity. This study identified three distinct barriers, namely the acquisition of gender-balanced applicants, the mitigation of gender-specific bias, and the effective management of dynamics team composition. In addition to the potential benefits of having a gender-diverse team, such as enhanced collaboration, balanced thinking, and inter-group competition, our research has identified three significant challenges. These include the need to overcome cultural and social norms that hinder gender diversity, effectively managing diversity management practices, and improving employee engagement and a sense of belonging. The initial results of our study offer some practical and theoretical implications for enhancing the potential of new ventures to leverage the advantages of gender-diverse teams to promote innovation. These we aim to study further as the doctoral investigation advances further through more extensive case study analysis
Adaptive Phase Detrending for GNSS Scintillation Detection: A Case Study Over Antarctica
We aim at contributing to the reliability of the phase scintillation index on Global Navigation Satellite System (GNSS) signals at high-latitude. To the scope, we leverage on a recently introduced detrending scheme based on the signal decomposition provided by the fast iterative filtering (FIF) technique. This detrending scheme has been demonstrated to enable a fine-tuning of the cutoff frequency for phase detrending used in the phase scintillation index definition. In a single case study based on Galileo data taken by a GNSS ionospheric scintillation monitor receiver (ISMR) in Concordia Station (Antarctica), we investigate how to step ahead of the cutoff frequency optimization. We show how the FIF-based detrending allows deriving adaptive cutoff frequencies, whose value changes minute-by-minute. They are found to range between 0.4 and 1.2 Hz. This allows better accounting for diffractive effects in phase scintillation index calculation and provides a GNSS-based estimation of the relative velocity between satellite and ionospheric irregularities
Disentangling ionospheric refraction and diffraction effects in GNSS raw phase through fast iterative filtering technique
We contribute to the debate on the identification of phase scintillation induced by the ionosphere on the global navigation satellite system (GNSS) by introducing a phase detrending method able to provide realistic values of the phase scintillation index at high latitude. It is based on the fast iterative filtering signal decomposition technique, which is a recently developed fast implementation of the well-established adaptive local iterative filtering algorithm. FIF has been conceived to decompose nonstationary signals efficiently and provide a discrete set of oscillating functions, each of them having its frequency. It overcomes most of the problems that arise when using traditional time–frequency analysis techniques and relies on a consolidated mathematical basis since its a priori convergence and stability have been proved. By relying on the capability of FIF to efficiently identify the frequencies embedded in the GNSS raw phase, we define a method based on the FIF-derived spectral features to identify the proper cutoff frequency for phase detrending. To test such a method, we analyze the data acquired from GPS and Galileo signals over Antarctica during the September 2017 storm by the ionospheric scintillation monitor receiver (ISMR) located in Concordia Station (75.10° S, 123.33° E). Different cases of diffraction and refraction effects are provided, showing the capability of the method in deriving a more accurate determination of the σϕ index. We found values of cutoff frequency in the range of 0.73–0.83 Hz, providing further evidence of the inadequacy of the choice of 0.1 Hz, which is often used when dealing with ionospheric scintillation monitoring at high latitudes
Molecular screening and single nucleotide polymorphism typing of molluscum contagiosum virus (MCV) from genital specimens, between 2012 and 2015
Background: The present study is the first comprehensive report of the Molluscum contagiosum virus (MCV) in Iran based on the molecular technique for differentiation and typing of the MCV1 and MCV2. Methods: Patients were diagnosed as having tumor-like genital warts less than 5 mm in diameter, and HIV seronegative samples were chosen for this cross-sectional study. TaqMan real-time PCR was used to identify MCV following clinical examination. Typing of the MCV-positive specimens was performed in the SNP A27451G region of MC021L gene. Results: Of 1470 samples, 114 (7.75) samples were positive for the MCV. From MCV-positive samples, 71.05 sequences were found to be related to the MCV1 and 28.95 to the MCV2. Conclusion: This assay constitutes a reliable method for identification and typing of the MCV genomic variants that could be valuable for reviewing the pathogenesis, molecular epidemiology, and the natural history of MCV-related situations. © 2018, Pasteur Institute of Iran. All rights reserved
Molecular screening and single nucleotide polymorphism typing of molluscum contagiosum virus (MCV) from genital specimens, between 2012 and 2015
Background: The present study is the first comprehensive report of the Molluscum contagiosum virus (MCV) in Iran based on the molecular technique for differentiation and typing of the MCV1 and MCV2. Methods: Patients were diagnosed as having tumor-like genital warts less than 5 mm in diameter, and HIV seronegative samples were chosen for this cross-sectional study. TaqMan real-time PCR was used to identify MCV following clinical examination. Typing of the MCV-positive specimens was performed in the SNP A27451G region of MC021L gene. Results: Of 1470 samples, 114 (7.75) samples were positive for the MCV. From MCV-positive samples, 71.05 sequences were found to be related to the MCV1 and 28.95 to the MCV2. Conclusion: This assay constitutes a reliable method for identification and typing of the MCV genomic variants that could be valuable for reviewing the pathogenesis, molecular epidemiology, and the natural history of MCV-related situations. © 2018, Pasteur Institute of Iran. All rights reserved
Additive manufacturing of bioactive glass biomaterials
Tissue engineering (TE) and regenerative medicine have held great promises for the repair and regeneration of damaged tissues and organs. Additive manufacturing has recently appeared as a versatile technology in TE strategies that enables the production of objects through layered printing. By applying 3D printing and bioprinting, it is now possible to make tissue-engineered constructs according to desired thickness, shape, and size that resemble the native structure of lost tissues. Up to now, several organic and inorganic materials were used as raw materials for 3D printing; bioactive glasses (BGs) are among the most hopeful substances regarding their excellent properties (e.g., bioactivity and biocompatibility). In addition, the reported studies have confirmed that BG-reinforced constructs can improve osteogenic, angiogenic, and antibacterial activities. This review aims to provide an up-to-date report on the development of BG-containing raw biomaterials that are currently being employed for the fabrication of 3D printed scaffolds used in tissue regeneration applications with a focus on their advantages and remaining challenges
- …