Eulerian simulation of the fluid dynamics of helicopter brownout

A computational model is presented that can be used to simulate the development of the dust cloud that can be entrained into the air when a helicopter is operated close to the ground in desert or dusty conditions. The physics of this problem, and the associated pathological condition known as ‘brownout’ where the pilot loses situational awareness as a result of his vision being occluded by dust suspended in the flow around the helicopter, is acknowledged to be very complex. The approach advocated here involves an approximation to the full dynamics of the coupled particulate-air system. Away from the ground, the model assumes that the suspended particles remain in near equilibrium under the action of aerodynamic forces. Close to the ground, this model is replaced by an algebraic sublayer model for the saltation and entrainment process. The origin of the model in the statistical mechanics of a distribution of particles governed by aerodynamic forces allows the validity of the method to be evaluated in context by comparing the physical properties of the suspended particulates to the local properties of the flow field surrounding the helicopter. The model applies in the Eulerian frame of reference of most conventional Computational Fluid Dynamics codes and has been coupled with Brown’s Vorticity Transport Model. Verification of the predictions of the coupled model against experimental data for particulate entrainment and transport in the flow around a model rotor are encouraging. An application of the coupled model to analyzing the differences in the geometry and extent of the dust clouds that are produced by single main rotor and tandem-rotor configurations as they decelerate to land has shown that the location of the ground vortex and the size of any regions of recirculatory flow, should they exist, play a primary role in governing the extent of the dust cloud that is created by the helicopter

Nuclear Photoabsorption at Photon Energies between 300 and 850 Mev

We construct the formula for the photonuclear total absorption cross section using the projection method and the unitarity relation. Our treatment is very effective when interference effects in the absorption processes on a nucleon are strong. The disappearance of the peak around the position of the $D_{13}$ resonance in the nuclear photoabsorption can be explained with the cooperative effect of the interference in two-pion production processes,the Fermi motion, the collision broadenings of $\Delta$ and $N^*$, and the pion distortion in the nuclear medium. The change of the interference effect by the medium plays an important role.Comment: 22pages,7figures,revtex

Cooperative damping mechanism of the resonance in the nuclear photoabsorption

We propose a resonance damping mechanism to explain the disappearance of the peaks around the position of the resonances higher than the $\Delta$ resonance in the nuclear photoabsorption. This phenomenon is understood by taking into account the cooperative effect of the collision broadening of $\Delta$ and $N^{*}$, the pion distortion and the interference in the two-pion photoproduction processes in the nuclear medium.Comment: 11 pages, uses revtex.sty. To appear in Phys. Rev. Let

Fantasies of subjugation: a discourse theoretical account of British policy on the European Union

The decision by the UK government to hold a referendum on Britain’s membership of the European Union (EU) marks an important development in policy towards the EU. Policy changes of this kind must be understood in the historical and political context in which they occur. This includes the framing of the policy issues within public discourse. In the UK, policies are formed in a discursive environment which is overwhelmingly hostile towards the EU. Debates are structured by a predominantly Euroskeptic discourse which emphasizes the UK’s separation and heterogeneity from the rest of the EU. Drawing on the logics of critical explanation, this article examines the structure and affective power of Euroskeptic discourses which dictate the terms of the EU debate. It presents a case study of the recent EU treaty revision process, culminating in the Treaty of Lisbon. In so doing, it enables a deeper understanding of recent policy developments

Thermoelectric spin voltage in graphene

In recent years, new spin-dependent thermal effects have been discovered in ferromagnets, stimulating a growing interest in spin caloritronics, a field that exploits the interaction between spin and heat currents. Amongst the most intriguing phenomena is the spin Seebeck effect, in which a thermal gradient gives rise to spin currents that are detected through the inverse spin Hall effect. Non-magnetic materials such as graphene are also relevant for spin caloritronics, thanks to efficient spin transport, energy-dependent carrier mobility and unique density of states. Here, we propose and demonstrate that a carrier thermal gradient in a graphene lateral spin valve can lead to a large increase of the spin voltage near to the graphene charge neutrality point. Such an increase results from a thermoelectric spin voltage, which is analogous to the voltage in a thermocouple and that can be enhanced by the presence of hot carriers generated by an applied current. These results could prove crucial to drive graphene spintronic devices and, in particular, to sustain pure spin signals with thermal gradients and to tune the remote spin accumulation by varying the spin-injection bias

A consistent first-order model for relativistic heat flow

This paper revisits the problem of heat conduction in relativistic fluids, associated with issues concerning both stability and causality. It has long been known that the problem requires information involving second order deviations from thermal equilibrium. Basically, any consistent first-order theory needs to remain cognizant of its higher-order origins. We demonstrate this by carrying out the required first-order reduction of a recent variational model. We provide an analysis of the dynamics of the system, obtaining the conditions that must be satisfied in order to avoid instabilities and acausal signal propagation. The results demonstrate, beyond any reasonable doubt, that the model has all the features one would expect of a real physical system. In particular, we highlight the presence of a second sound for heat in the appropriate limit. We also make contact with previous work on the problem by showing how the various constraints on our system agree with previously established results.Comment: RevTeX, 1 eps Figur

Simulations of energetic beam deposition: from picoseconds to seconds

We present a new method for simulating crystal growth by energetic beam deposition. The method combines a Kinetic Monte-Carlo simulation for the thermal surface diffusion with a small scale molecular dynamics simulation of every single deposition event. We have implemented the method using the effective medium theory as a model potential for the atomic interactions, and present simulations for Ag/Ag(111) and Pt/Pt(111) for incoming energies up to 35 eV. The method is capable of following the growth of several monolayers at realistic growth rates of 1 monolayer per second, correctly accounting for both energy-induced atomic mobility and thermal surface diffusion. We find that the energy influences island and step densities and can induce layer-by-layer growth. We find an optimal energy for layer-by-layer growth (25 eV for Ag), which correlates with where the net impact-induced downward interlayer transport is at a maximum. A high step density is needed for energy induced layer-by-layer growth, hence the effect dies away at increased temperatures, where thermal surface diffusion reduces the step density. As part of the development of the method, we present molecular dynamics simulations of single atom-surface collisions on flat parts of the surface and near straight steps, we identify microscopic mechanisms by which the energy influences the growth, and we discuss the nature of the energy-induced atomic mobility

Electro-Magnetic Nucleon Form Factors and their Spectral Functions in Soliton Models

It is demonstrated that in simple soliton models essential features of the electro-magnetic nucleon form factors observed over three orders of magnitude in momentum transfer $t$ are naturally reproduced. The analysis shows that three basic ingredients are required: an extended object, partial coupling to vector mesons, and relativistic recoil corrections. We use for the extended object the standard skyrmion, one vector meson propagator for both isospin channels, and the relativistic boost to the Breit frame. Continuation to timelike $t$ leads to quite stable results for the spectral functions in the regime from the 2- or 3-pion threshold to about two rho masses. Especially the onset of the continuous part of the spectral functions at threshold can be reliably determined and there are strong analogies to the results imposed on dispersion theoretic approaches by the unitarity constraint.Comment: 24 pages, (RevTeX), 5 PS-figures; Data points in fig.2 and corresponding references added. Final version, to be published in Z.Physik