Acute Effect of Quadriceps Myofascial Tissue Rolling Using A Mechanical Self-Myofascial Release Roller-Massager on Performance and Recovery in Young Elite Speed Skaters

Objectives: The main purpose of the present study was to investigate the acute effects of myofascial tissue rolling on endurance performance and recovery using a novel designed mechanical self-induced multi-bar roller-massager. Methods: a randomized crossover, repeated measure design was used. Eight national levelled, junior and neo-senior, speed skaters underwent a 10 min myofascial quadriceps rolling pre- and fifteen minutes post- a stepwise incremental cycling-test to exhaustion followed by a Wingate performance-test. The myofascial quadriceps rolling was used in one out of two laboratory testing-days. Time to exhaustion, peak oxygen uptake (VO2peak), blood lactate concentration during 30 min of recovery, and peak- and mean- power during the consecutive Wingate test were recorded. Results: Myofascial quadriceps rolling using roller-massager resulted in higher blood lactate concentration at exhaustion and a larger blood lactate clearance after 10 min to post exhaustion test (both p < 0.05), a tendency for a positive effect on Wingate peak-power (p = 0.084; d = 0.71), whereas no marked differences were observed on VO2peak, time to exhaustion and Wingate mean-power. Conclusion: Despite indications for potential benefits of the quadriceps myofascial tissue release using the mechanical self-induced multi-bar roller-massager on blood lactate concentration and Wingate peak-power, the myofascial tissue release gave no marked performance improvements nor indications of negative effects. Future studies could examine the long-term effects of myofascial tissue release on performance and recovery. Furthermore, integrating a measure of the participants’ subjective experience pre- and post the myofascial tissue release would be of great interest.publishedVersio

A new bathymetry of the Northeast Greenland continental shelf: constraints on glacial and 2 other processes

A new digital bathymetric model (DBM) for the Northeast Greenland (NEG) continental shelf (74°N–81°N) is presented. The DBM has a grid cell size of 250 m × 250 m and incorporates bathymetric data from 30 multibeam cruises, more than 20 single-beam cruises and first reflector depths from industrial seismic lines. The new DBM substantially improves the bathymetry compared to older models. The DBM not only allows a better delineation of previously known seafloor morphology but, in addition, reveals the presence of previously unmapped morphological features including glacially derived troughs, fjords, grounding-zone wedges, and lateral moraines. These submarine landforms are used to infer the past extent and ice-flow dynamics of the Greenland Ice Sheet during the last full-glacial period of the Quaternary and subsequent ice retreat across the continental shelf. The DBM reveals cross-shelf bathymetric troughs that may enable the inflow of warm Atlantic water masses across the shelf, driving enhanced basal melting of the marine-terminating outlet glaciers draining the ice sheet to the coast in Northeast Greenland. Knolls, sinks, and hummocky seafloor on the middle shelf are also suggested to be related to salt diapirism. North-south-orientated elongate depressions are identified that probably relate to ice-marginal processes in combination with erosion caused by the East Greenland Current. A single guyot-like peak has been discovered and is interpreted to have been produced during a volcanic event approximately 55 Ma ago

Atlas Data-Challenge 1 on NorduGrid

The first LHC application ever to be executed in a computational Grid environment is the so-called ATLAS Data-Challenge 1, more specifically, the part assigned to the Scandinavian members of the ATLAS Collaboration. Taking advantage of the NorduGrid testbed and tools, physicists from Denmark, Norway and Sweden were able to participate in the overall exercise starting in July 2002 and continuing through the rest of 2002 and the first part of 2003 using solely the NorduGrid environment. This allowed to distribute input data over a wide area, and rely on the NorduGrid resource discovery mechanism to find an optimal cluster for job submission. During the whole Data-Challenge 1, more than 2 TB of input data was processed and more than 2.5 TB of output data was produced by more than 4750 Grid jobs.Comment: Talk from the 2003 Computing in High Energy Physics and Nuclear Physics (CHEP03), La Jolla, Ca, USA, March 2003, 7 pages, 3 ps figure

Use of a Distributed Micro-sensor System for Monitoring the Indoor Particulate Matter Concentration in the Atmosphere of Ferroalloy Production Plants

Airborne particulate matter (PM) is a concern for both occupational health and the environment, and, in the ferroalloy industry, the level of such particles in the air can be considerable. Small, low-cost sensors for measuring PM have generated interest in recent years, providing widespread monitoring of PM levels in the environment. However, such sensors have not yet been sufficiently tested under conditions relevant for the indoor environment of the metallurgical industry. This study aims to bridge this gap by benchmarking the commercial, low-cost Nova PM SDS011 particle sensor in two different ferroalloy plants. Benchmarking was performed against the Fidas 200S, which has been suitability-tested and certified according to the latest EU requirements (EN 15267, EN 16450). Twelve Nova sensors were tested over 3 months at a silicomanganese alloy (SiMn) plant, and 35 sensors were tested during 1 month at a silicon (Si) plant. The results showed that the low-cost Nova sensors exhibited all the same trends and peaks in terms of PM concentration, but measured lower dust concentrations than the Fidas 200S. The difference was larger at the silicon plant, which is in line with expectations, due to the size and mass fractions of particles in Si dust compared to SiMn dust, and to the larger measurement range of the Fidas, measuring down to 180 nm compared to the Nova which measures down to 300 nm. Despite the difference in absolute values, the Nova sensors were found to provide data for comparing dust levels over time for different processes, at different locations, and under different operational conditions.publishedVersio

Saltkraft : ei teoretisk innføring og utgreiing av eit minikraftverk

Målet med denne rapporten er å gje ei teoretisk innføring i trykkretardert osmose og reversert elektrodialyse, som er to av dei mest brukte teknologiane bak saltkraft. Energipotensialet er stort, saltkraft kan utvinnas i heile verda der ferskvatn frå elver renn ut i salt hav. Krafta frå ei elv kan samanliknas med eit fossefall på over 100 meter. Vi nyttar og teorien til å greie ut eit minikraftverk i Storelva i Vevring, Sogn og Fjordane. Utgreiinga viser at det er eit betydeleg effektpotensiale, med ein teoretisk årsproduksjon på i underkant av 1 GWh frå ei elv med nytteleg vassføring på 0,14 m3/s

Decay in chest compression quality due to fatigue is rare during prolonged advanced life support in a manikin model

<p>Abstract</p> <p>Background</p> <p>The aim of this study was to measure chest compression decay during simulated advanced life support (ALS) in a cardiac arrest manikin model.</p> <p>Methods</p> <p>19 paramedic teams, each consisting of three paramedics, performed ALS for 12 minutes with the same paramedic providing all chest compressions. The patient was a resuscitation manikin found in ventricular fibrillation (VF). The first shock terminated the VF and the patient remained in pulseless electrical activity (PEA) throughout the scenario. Average chest compression depth and rate was measured each minute for 12 minutes and divided into three groups based on chest compression quality; good (compression depth ≥ 40 mm, compression rate 100-120/minute for each minute of CPR), bad (initial compression depth < 40 mm, initial compression rate < 100 or > 120/minute) or decay (change from good to bad during the 12 minutes). Changes in no-flow ratio (NFR, defined as the time without chest compressions divided by the total time of the ALS scenario) over time was also measured.</p> <p>Results</p> <p>Based on compression depth, 5 (26%), 9 (47%) and 5 (26%) were good, bad and with decay, respectively. Only one paramedic experienced decay within the first two minutes. Based on compression rate, 6 (32%), 6 (32%) and 7 (37%) were good, bad and with decay, respectively. NFR was 22% in both the 1-3 and 4-6 minute periods, respectively, but decreased to 14% in the 7-9 minute period (P = 0.002) and to 10% in the 10-12 minute period (P < 0.001).</p> <p>Conclusions</p> <p>In this simulated cardiac arrest manikin study, only half of the providers achieved guideline recommended compression depth during prolonged ALS. Large inter-individual differences in chest compression quality were already present from the initiation of CPR. Chest compression decay and thereby fatigue within the first two minutes was rare.</p

High Voltage Powerline Injury Studies

Current pathways and reconstructions of human injury after contact with distribution powerlines are not well understood. The impedance, currents, and modes of tissue destruction are rarely known. Eight anesthetized hogs, weighing 68 to 90 kg, were used in studies with potentials ranging from 2,100 to 14,400 volts. Electrical contact was made between the hindlimbs, from the hindlimb to forelimb, and over other regions of the body. Currents from 4 to 70 amperes rms and impedances ranging from 130 to 477 ohms were measured. Phase angles up to 40° were observed. Copyright © 1981 by The Institute of Electrical and Electronics Engineers, Inc

Creating a learner performance dashboard for programmatic assessment

Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/155457/1/tct13106_am.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/155457/2/tct13106.pd

Inside the volcano : Three-dimensional magmatic architecture of a buried shield volcano

Acknowledgements: Funding from NERC (Oil and Gas CDT) and BGS is gratefully acknowledged. DAJ and SP are part-funded by the Research Council of Norway Centre of Excellence funding scheme (project No. 223272). TGS is thanked for providing seismic data to the University of Aberdeen. Seismic interpretation was undertaken using Schlumberger Petrel software and gravity modelling using ARK CLS XField software. Thanks go to Steffi Burchardt, Eric Horsman and Christian Eide for constructive reviews which greatly improved the manuscript.Peer reviewedPublisher PD

The pre-breakup stratigraphy and petroleum system of the Southern Jan Mayen Ridge revealed by seafloor sampling

The authors would like to acknowledge the contribution from the vessel’s crew (captain I. Rasmussen) and operator (Thor Ltd), the two surveyors (K. Høysæth and H.B. Bortne), and two sampling assistants (F. Gausepohl and A.-M. Voelsch). Sverre Planke and Dougal Jerram are partly funded through a Norwegian Research Council Centers of Excellence project (project number 223272, CEED). Adriano Mazzini is funded by the European Research Council under the European Union's Seventh Framework Programme Grant agreement n° 308126 (LUSI LAB project, PI A. Mazzini). TGS and VBPR funded the cruise and allowed the publication of the data and interpretation. Steve Killops from APT refined our interpretation of the biomarker data. The reviewers and the editor are also thanked for their constructive comments. Finally, this article is dedicated to the biostratigrapher Haavard Selnes who sadly passed away in 2015.Peer reviewedPostprin