28,197 research outputs found
Exchange of information about physical education to support the transition of pupils from primary and secondary school
The purpose of this study was to identify how information about physical education is exchanged between secondary schools and their respective feeder primary schools, what information is exchanged and how this information is used. A secondary purpose was to look at whether there is any relationship between schools engaging in liaison activities and exchanging information about physical education, and between exchanging information and the number of associated secondary schools to which pupils are sent or feeder primary schools from which pupils are received. Questionnaires were sent to 177 secondary and 538 feeder primary schools. Responses from 80 secondary schools and 299 primary schools showed that the highest percentage of teachers exchanged information through written documentation, followed by discussion at cross phase liaison meetings. The type of information exchanged by the highest percentage of teachers was identified as generic information about key stage 2 and 3 of the National Curriculum for Physical Education (NCPE) areas of activity and schemes of work, rather than information about the specific physical education content covered or information about individual pupils, such as levels of attainment or ability. Further, results suggest that information may be used for pastoral purposes and that only a small percentage of teachers used the information exchanged to plan for continuity and progression in the physical education curriculum. There was a significant positive relationship between engagement in liaison activities and information received about the physical education curriculum followed by pupils, but a significant negative relationship for primary teachers between the number of different secondary schools to which pupils' progress and knowledge about the key stage 3 schemes of work that Year 6 pupils will follow in their associated secondary schools. These results are discussed in relation to continuity and progression in physical education in the transfer of pupils from primary to secondary schools
A study of current practice in liaison between primary and secondary schools in physical education
The purpose of this study was to investigate current practice in liaison between primary and secondary schools to promote continuity and progression in physical education during the transfer of pupils from Key Stage 2 to Key Stage 3 and to identify constraints to engaging in liaison activities. A questionnaire was completed by the head of the physical education department in secondary schools in five local education authorities in England that received pupils from primary schools in year 7 (n = 80) and by the physical education coordinator of the primary feeder schools of those secondary schools that responded to the questionnaire (n = 299). Results showed that 32 (43.8%) secondary teachers and 157 (53.4%) primary teachers identified that they had established contacts with their primary feeder schools or associated secondary schools respectively; and 49 (64.5%) secondary teachers but 114 (39.6%) primary teachers identified that currently they were engaged in liaison activities. There was a discrepancy between the percentages of teachers who indicated they had contacts with their primary feeder schools or associated secondary schools respectively, and who indicated they were engaged in liaison activities with them. These results suggested that contacts with and/or engagement in liaison activities between primary and secondary schools were not consistent across schools. A range of constraints for developing effective contacts/liaison activities were identified, with time being identified as the major constraint by both primary and secondary teachers. A range of suggestions for overcoming the constraints were also identified. These results are discussed in relation to findings from studies looking at liaison in other subjects and also in relation to the implications for schools
Recommended from our members
The transfer of pupils from primary to secondary school: A case study of a foundation subject - physical education
A series of transitions, from class to class, year to year and school to school, are integral to the education system in England. The transfer of pupils from primary to secondary education is an important stage of transition. Models for managing this transfer highlight different aspects of the experience, including social/pastoral integration and curriculum continuity and progression of individual pupils. The purpose of this study was to investigate the transfer of pupils from primary to secondary school in relation to physical education. Semi-structured interviews were conducted with 14 secondary school physical education heads of department. Results showed that although all of the heads of department reported the transfer of pupils from primary to secondary school to be very important in relation to physical education, this was not translated into practice. There was limited involvement in activities supporting the transfer from primary to secondary school, and what involvement there was placed greater emphasis on activities to support social/pastoral integration than to support continuity and progression of individual pupils during transfer. Some possible reasons for these results are considered, along with some suggestions for further research
Towards obtaining robust boundary condition parameters to aid accuracy in FEA thermal error predictions
Finite Element Analysis (FEA) is used as a design tool within engineering industries due to the
capability for rapid summative analysis accompanied by the visual aid. However, to represent realistic behaviour, FEA relies heavily on input parameters which must ideally be based on true figures such as data from experimental testing which sometimes requires time-consuming testing regimes. In the case of machine tool assemblies where complex structural joints and linkages are present, access to those areas can be a primary constraint to obtaining related boundary parameters such as heat flow across joints, for which, assumptions are incorporated to the FEA model which in effect increase the uncertainty in the FEA predictions. Similarly, in the case of thermal error modelling, simplifications are made when representing thermal boundary conditions such as the application of a uniform convection parameter to an assembly with parts assembled in both horizontal and vertical orientations. This research work aims to reduce the number of
assumptions by providing experimentally obtained thermal boundary condition parameters. This
work acknowledges experimental regimes that focus on obtaining thermal parameters related
to the conduction across assembly joints (Thermal Contact Conductance-TCC) and measures the
convection around areas such as belt drives and rotating parts to obtain convection parameters
as inputs to the FEA. It provides TCC parameters for variable interfacial behaviour based on the
varying contact pressure and the heat flow through dry and oiled contacts such as the conduction from spindle bearings to the surrounding housing and conduction from guideways into the associated assembly through carriages and contact bearings. It provides convection parameters across the test mandrel rotating at different speeds and around stationary structures such as convection parameters observed during TCC tests. It also provide details on the methods used to obtain all these parameters such as the use of thermal imaging, sensors placements and methods to obtain these boundary condition parameters. The significance of this work is to improve dramatically FEA thermal predictions, which are a critical part of engineering design. Although the focus is on machine tool design, the process and parameters can equally be applied to other areas of thermodynamic behaviour
Efficient estimation by FEA of machine tool distortion due to environmental temperature perturbations
Machine tools are susceptible to exogenous influences, which mainly derive from varying environmental conditions such as the day and night or seasonal transitions during which large temperature swings can occur. Thermal gradients cause heat to flow through the machine structure and results in non-linear structural deformation whether the machine is in operation or in a static mode. These environmentally stimulated deformations combine with the effects of any internally generated heat and can result in significant error increase if a machine tool is operated for long term regimes. In most engineering industries, environmental testing is often avoided due to the associated extensive machine downtime required to map empirically the thermal relationship and the associated cost to production. This paper presents a novel offline thermal error modelling methodology using finite element analysis (FEA) which significantly reduces the machine downtime required to establish the thermal response. It also describes the strategies required to calibrate the model using efficient on-machine measurement strategies. The technique is to create an FEA model of the machine followed by the application of the proposed methodology in which initial thermal states of the real machine and the simulated machine model are matched. An added benefit is that the method determines the minimum experimental testing time required on a machine; production management is then fully informed of the cost-to-production of establishing this important accuracy parameter. The most significant contribution of this work is presented in a typical case study; thermal model calibration is reduced from a fortnight to a few hours. The validation work has been carried out over a period of over a year to establish robustness to overall seasonal changes and the distinctly different daily changes at varying times of year. Samples of this data are presented that show that the FEA-based method correlated well with the experimental results resulting in the residual errors of less than 12 μm
FEA-based design study for optimising non-rigid error detection on machine tools
Non-rigid-body behaviour can have a considerable effect on the overall accuracy performance of machine tools. These errors originate from bending of the machine structure due to change in distribution of its own weight or from movement of the workpiece and fixture. These effects should be reduced by good mechanical design, but residual errors can still be problematic due to realistic material and cost limitations. One method of compensation is to measure the deformation directly with sensors embedded in a metrology frame. This paper presents an FEA-based design study which assesses finite stiffness effects in both the machine structure and its foundation to optimise the sensitivity of the frame to the resulting errors. The study results show how a reference artefact, optimised by the FEA study, can be used to detect the distortion
Quantitative ultraviolet measurements on wetted thin-layer chromatography plates using a charge-coupled device camera
This paper presents the first study of the UV imaging of spots on thin-layer chromatographic plates whilst still wet with solvent. Imaging of spots of benzophenone during and after development was carried out using a charge-coupled device camera. Limits of detection were found to be 5 ng on a wetted plate and 3 ng for a dry plate and the relationship between peak area and sample loading was found to be linear in the low nanograrn range over an order of magnitude for both wet and dry modes with r(2) values > 0.99. It was found that UV measurements on wet glass-backed plates suffer from low sensitivity; however, the use of aluminium-backed plates gave increased sensitivity. The apparent absorption coefficient (epsilon(app)) of 10AU m(2) g(-1) at 254 nm is consistent with reflection of the light from the aluminium surface with a double pass through the sorbent layer, and suggests that use of aluminium-backed plates should enable monitoring of separations by UV absorbance during TLC development. (c) 2008 Elsevier B.V. All rights reserved
Five-Axis Machine Tool Condition Monitoring Using dSPACE Real-Time System
This paper presents the design, development and SIMULINK implementation of the lumped parameter model of C-axis drive from GEISS five-axis CNC machine tool. The simulated results compare well with the experimental data measured from the actual machine. Also the paper describes the steps for data acquisition using ControlDesk and hardware-in-the-loop implementation of the drive models in dSPACE real-time system. The main components of the HIL system are: the drive model simulation and input – output (I/O) modules for receiving the real controller outputs. The paper explains how the experimental data obtained from the data acquisition process using dSPACE real-time system can be used for the development of machine tool diagnosis and prognosis systems that facilitate the improvement of maintenance activities
Stability of Influence Maximization
The present article serves as an erratum to our paper of the same title,
which was presented and published in the KDD 2014 conference. In that article,
we claimed falsely that the objective function defined in Section 1.4 is
non-monotone submodular. We are deeply indebted to Debmalya Mandal, Jean
Pouget-Abadie and Yaron Singer for bringing to our attention a counter-example
to that claim.
Subsequent to becoming aware of the counter-example, we have shown that the
objective function is in fact NP-hard to approximate to within a factor of
for any .
In an attempt to fix the record, the present article combines the problem
motivation, models, and experimental results sections from the original
incorrect article with the new hardness result. We would like readers to only
cite and use this version (which will remain an unpublished note) instead of
the incorrect conference version.Comment: Erratum of Paper "Stability of Influence Maximization" which was
presented and published in the KDD1
signals at LEP2 energies in the Minimal Supersymmetric Standard Model
In this paper we compare and into four-fermion production
at centre-of-mass energies typical of LEP2 and somewhat larger. The theoretical
framework considered is the Minimal Supersymmetric Standard Model. The interest
in exploiting the CERN collider at values of greater than
192 GeV could come from the discovery of Supersymmetric signals during runs at
lower energy. If these indicate that a charged Higgs boson exists in the mass
range \MH\approx95-105 GeV, then a few years of running at
GeV and nominal luminosity could make the detection of such scalars feasible,
in the purely leptonic channel and, for small
\tb's, also in the semi-hadronic(leptonic) one . Charged
Higgs bosons of the above nature cannot be produced by the beam energies
approved at present for LEP2. However, if runs beyond the so-called `192 GeV
cryogenic limit' will be approved by the CERN Council, our selection procedure
will enable us to establish the presence, or otherwise, of charged Higgs bosons
in the mentioned mass rangeComment: 30 pages, latex, epsfig, 12 postscript figures, complete paper
available at ftp://axpa.hep.phy.cam.ac.uk/stefano/cavendish_9615 and at
http://www.hep.phy.cam.ac.uk/theory/papers
- …