447 research outputs found

    Interactions of the land-surface with the atmospheric boundary layer: Case studies from LASPEX

    Get PDF
    The daytime interaction of the land-surface with the atmospheric boundary layer (ABL) is studied for two case study days representing pre-monsoon and monsoon conditions during the Land Surface Processes Experiment (LASPEX) field program which was carried out in the tropical semi-arid region in the northwest Indian state of Gujarat. In this study, a one-dimensional (column) ABL model which has a land-surface scheme that interacts with the ABL is used. Results indicate that in coupled land-atmosphere simulations, realistic daytime surface fluxes and atmospheric profiles are produced, though improvement is needed, particularly in the transpiration and soil heat flux formulation

    Wind profiles in the boundary layer over Kharagpur associated with synoptic scale systems

    Get PDF
    Doppler sodar wind data for the boundary layer over Kharagpur obtained during MONTBLEX-1990 at a height interval of 30 m from surface up to 1500 m have been analysed for the periods when intense synoptic scale disturbances from north Bay of Bengal moved along the eastern end of the monsoon trough. The variation in the vertical wind profile in the lower boundary layer over Kharagpur during the passage of synoptic scale disturbances has been discussed in the paper. The analysis indicates that the mean winds over Kharagpur veered with height in the lower boundary layer near the surface suggesting divergence over Kharagpur when the system lay south/southwest of the station. No such veering has been noticed when the centre of the system lay very close to the station

    A study of turbulent characteristics of atmospheric boundary layer over monsoon trough region using Kytoon and Doppler sodar

    Get PDF
    As a part of the MONTBLEX-90 observational programme, Kytoon and Doppler sodar observations were taken at Kharagpur. These data are analysed to study the turbulent characteristics of the atmospheric boundary layer in terms of stability, temperature structure function (CT2 ) and velocity structure function (Cv2 ). CT2 follows a Z-4/3 law on most of the days, whereas the variation of CV2 is not systematic. CV2 and CT2 values are found to vary between 10-5-10-1 m4/3s-2 and 10-5-10-2°C2 m-2/3 respectively

    On the influence of spatial heterogeneity on an internal boundary layer at a short fetch

    Get PDF
    Surface layer meteorological data collected at a coastal site, at Vasco-Da-Gama (15°21′N, 73°51′E, 58.5m MSL) (13–18 July, 2002) with prevailing southwesterly surface winds are analyzed to study the characteristics of internal boundary layer at a short fetch using an instrumented tower (9 m). The spectral and turbulence characteristics of wind are compared with earlier measurements made at a comparatively homogeneous terrain and the standards available in literature. The study show the smaller eddies in the vertical velocity spectrum attains equilibrium with the underlying surface at a short fetch itself and follows spectral similarity. However, this is not followed by longitudinal and transverse velocity spectra under unstable as well as stable condition

    Aerosol optical properties and composition over a table top complex mining area in a monsoon trough region

    Get PDF
    Aerosol physiochemical properties over a varied mining plateau region at the eastern end of a monsoon trough are reported for the first time and analyzed at different time scales. Aerosol optical depth (single scattering albedo, SSA) is found to be 0.49 (0.9) in pre-monsoon, 0.4 (0.94) in monsoon, 0.46 (0.92) in post-monsoon, and 0.36 (0.89) in winter, with an annual mean of 0.43 (0.91). The volume-size distribution is tri-modal, with 0.02 (ultra-fine), 0.2 (accumulation) and 7 (coarse) µm, but with seasonal signatures. The angstrom exponent (AE) varies along with the AOD, especially in winter, although they are inversely related to each other during monsoons; the increase in size may be due to the effect of humidity. AODbc varies between 13.4%–4.7% of the total aerosols, with the highest contribution in March, when forest burning in the north east is at its peak. BC is the lowest in July, the mid monsoon month with the minimum biomass burning and brick-kiln activities. It is likely that the interactions of various minerals and intermittent rains help keep the aerosol size in a mixed state with regard to the relation between AE and AOD, although more work is needed to confirm this. The chemical composition of aerosols is derived from an aerosol chemical model based on the measured amount of black carbon and the assumed components

    Aerosol optical properties and composition over a table top complex mining area in the Monsoon trough region

    Get PDF
    Aerosol physiochemical properties over a varied mining plateau region at the eastern end of a monsoon trough are reported for the first time and analyzed at different time scales. Aerosol optical depth (single scattering albedo, SSA) is found to be 0.49 (0.9) in pre-monsoon, 0.4 (0.94) in monsoon, 0.46 (0.92) in post-monsoon, and 0.36 (0.89) in winter, with an annual mean of 0.43 (0.91). The volume-size distribution is tri-modal, with 0.02 (ultra-fine), 0.2 (accumulation) and 7 (coarse) µm, but with seasonal signatures. The angstrom exponent (AE) varies along with the AOD, especially in winter, although they are inversely related to each other during monsoons; the increase in size may be due to the effect of humidity. AODbc varies between 13.4%–4.7% of the total aerosols, with the highest contribution in March, when forest burning in the north east is at its peak. BC is the lowest in July, the mid monsoon month with the minimum biomass burning and brick-kiln activities. It is likely that the interactions of various minerals and intermittent rains help keep the aerosol size in a mixed state with regard to the relation between AE and AOD, although more work is needed to confirm this. The chemical composition of aerosols is derived from an aerosol chemical model based on the measured amount of black carbon and the assumed components. These components are selected based on back trajectories and earlier reports from the region. Their concentrations are adjusted by constraining the model output AOD and SSA to match (±2% @ 500 nm) that observed by a sun-sky radiometer. The chemical compositions of the winter and post-monsoon months are similar, while pre-monsoon period has more coarse mode minerals, and the monsoon period has more sea-salt (accu.). The component mass concentrations were grouped into various size bins based on their modal radii, and the results indicate that PM1 is at its maximum in winter whereas PM2.5 is highest in the post-monsoon period. Monsoons leads to the effective washout of 2.5–10 µm sized particles

    Surface modification of HVOF thermal sprayed WC–CoCr coatings by laser treatment

    Get PDF
    In this work the affects of laser characteristics on microstructure and microhardness of high velocity oxygen fuel sprayed (HVOF) WC–CoCr coatings were investigated. The coating was deposited with a Sulzer Metco WokaJet™-400 kerosene fuel and the laser surface treatments were applied using CO2 laser with 10.6 μm wavelength. Large variations in surface properties were produced from variation in the laser processing parameters. In total, four levels of peak power (100, 200, 300 and 350 W), four levels of spot diameter (0.2, 0.4, 0.6 and 1 mm) and three levels of pulse repetition frequency (PRF) were investigated. An initial set of tests were followed by a more detailed 33 factorial design of experiments. Pulse repetition frequency and duty cycle were set in order to maintain the same overlap in the x and y directions for the raster scanned sample spot impact dimensions. Overlaps of 30% were used in the initial tests and 10% in the more detailed trials. The results have shown that care must be taken to keep the irradiance at a relatively low level compared to uncoated surfaces. High irradiance can in this case result in rough and porous surfaces. Lower levels of irradiance are shown to provide more uniform microstructures, reduced porosity and increased microhardness

    Family-led rehabilitation after stroke in India (ATTEND): a randomised controlled trial

    Get PDF
    Background: Most people with stroke in India have no access to organised rehabilitation services. The effectiveness of training family members to provide stroke rehabilitation is uncertain. Our primary objective was to determine whether family-led stroke rehabilitation, initiated in hospital and continued at home, would be superior to usual care in a low-resource setting. Methods: The Family-led Rehabilitation after Stroke in India (ATTEND) trial was a prospectively randomised open trial with blinded endpoint done across 14 hospitals in India. Patients aged 18 years or older who had had a stroke within the past month, had residual disability and reasonable expectation of survival, and who had an informal family-nominated caregiver were randomly assigned to intervention or usual care by site coordinators using a secure web-based system with minimisation by site and stroke severity. The family members of participants in the intervention group received additional structured rehabilitation training—including information provision, joint goal setting, carer training, and task-specific training—that was started in hospital and continued at home for up to 2 months. The primary outcome was death or dependency at 6 months, defined by scores 3–6 on the modified Rankin scale (range, 0 [no symptoms] to 6 [death]) as assessed by masked observers. Analyses were by intention to treat. This trial is registered with Clinical Trials Registry-India (CTRI/2013/04/003557), Australian New Zealand Clinical Trials Registry (ACTRN12613000078752), and Universal Trial Number (U1111-1138-6707). Findings: Between Jan 13, 2014, and Feb 12, 2016, 1250 patients were randomly assigned to intervention (n=623) or control (n=627) groups. 33 patients were lost to follow-up (14 intervention, 19 control) and five patients withdrew (two intervention, three control). At 6 months, 285 (47%) of 607 patients in the intervention group and 287 (47%) of 605 controls were dead or dependent (odds ratio 0·98, 95% CI 0·78–1·23, p=0·87). 72 (12%) patients in the intervention group and 86 (14%) in the control group died (p=0·27), and we observed no difference in rehospitalisation (89 [14%]patients in the intervention group vs 82 [13%] in the control group; p=0·56). We also found no difference in total non-fatal events (112 events in 82 [13%] intervention patients vs 110 events in 79 [13%] control patients; p=0·80). Interpretation: Although task shifting is an attractive solution for health-care sustainability, our results do not support investment in new stroke rehabilitation services that shift tasks to family caregivers, unless new evidence emerges. A future avenue of research should be to investigate the effects of task shifting to health-care assistants or team-based community care. Funding: The National Health and Medical Research Council of Australia

    Impulse Buying in the Digital Age: A Dimensional Study on Influencer Marketing Impact on Millennials

    Get PDF
    This study explores the relationship between influencer characteristics, consumer emotions, and self-construction in the context of impulse buying among millennials in the digital age. It examines how specific traits and qualities of influencers influence millennials' emotions and shape their self-identity during the process of impulse buying. The research investigates the dimensions of influencer marketing that have the most significant impact on millennials' emotional responses and their construction of self-image. By analysing the interplay between influencer characteristics, consumer emotions, and self-construction, this study provides valuable insights into the underlying mechanisms driving impulse buying behavior among millennials in the digital era. The results provide new insight into the power of influencers to sway customer behavior and suggest ways in which businesses may more successfully employ influencer marketing to connect with and convert young buyers

    Logarithmic Corrections to Extremal Black Hole Entropy from Quantum Entropy Function

    Get PDF
    We evaluate the one loop determinant of matter multiplet fields of N=4 supergravity in the near horizon geometry of quarter BPS black holes, and use it to calculate logarithmic corrections to the entropy of these black holes using the quantum entropy function formalism. We show that even though individual fields give non-vanishing logarithmic contribution to the entropy, the net contribution from all the fields in the matter multiplet vanishes. Thus logarithmic corrections to the entropy of quarter BPS black holes, if present, must be independent of the number of matter multiplet fields in the theory. This is consistent with the microscopic results. During our analysis we also determine the complete spectrum of small fluctuations of matter multiplet fields in the near horizon geometry.Comment: LaTeX file, 52 pages; v2: minor corrections, references adde
    corecore