Factors affecting ceramic abradable coating damage accommodation

High temperature abradable coatings are based on thermal barrier coating compositions and play an integral role in not only providing thermal protection for turbine shrouds, but also in maintaining blade tip clearances for increased turbine efficiencies. As turbine material technologies advance, there is a push for the development of abradable coatings that can withstand more severe operating conditions and retain the optimum balance of abradability and durability. However, as abradable coating technologies are pushed to higher temperatures and greater capabilities, such as compatibility with ceramic matrix composites, there are significant challenges in understanding the underlying mechanisms that aid the design of these inherently brittle materials enabling them to accommodate damage in a controlled manner. This study will first discuss the theories for fracture mechanics and wear mechanisms in ceramics and how they can be related to abradable coatings. The influence of microstructural defects present in current technology ceramic abradable coatings on the preferred wear behavior of these systems will then be investigated. The coatings to be compared are air plasma sprayed dysprosia- or yttria- stabilized zirconia with varying fractions of pore former and secondary phases. The wear of both as-received and aged coatings will be tested, and deformation mechanisms will be reported. Links between different defects, their evolution with aging, and observed wear behavior will be compared with two competing definitions of desired abradable damage accommodation mechanisms, with one being energy dissipation through plastic deformation and the other depending on crack propagation and frictional sliding of the removed material to dissipate energy

On the CMAS Problem in Thermal Barrier Coatings%253A Benchmarking Thermochemical Resistance of Oxides Alternative to YSZ Through a Microscopic Standpoint

This study focuses on experimental modelling of the failure of Thermal Barrier Coatings (TBCs) due to attack of CMAS (Calcia-Magnesia-Alumina-Silicate), which is often found in harsh environments, via glassy phase infiltration. Volcanic ash and dust, sand particles, and fly ash, which contain CMAS, are imminent threats impeding predictable lifetimes of TBCs. Such incurrence directly affects the geometry and clinging to bond coat, and intrinsic material properties such as thermal conductivity and crystal structure of TBC are modified after exposure to CMAS, which ultimately results in delamination, spallation and failure of the coating material. The scope of this work is to survey the reactivity of CMAS with various oxide systems, and evaluate possible oxide systems that can be replaced and%252For used with Yttria-stabilized Zirconia (YSZ) by investigating the penetration depth and reactivity after sintering with CMAS. A cost-effective method to observe the reaction of candidate oxides with CMAS is suggested and administired%253B understanding the main mechanism that causes the failure of top coat in the wake of CMAS infiltration, and seeking solutions for the problem is performed by taking advantage of Scanning Electron Microscopy (SEM). Recently suggested ceramic oxide systems that form in pyrochlore structure, some perovskite structures in various compositions, monazite, mullite and YSZ are studied. The possible outcome consequent upon CMAS infiltration are concluded and course for designing novel material systems that are expected to withstand the CMAS attacks better than the state-of-the-art 4mole%25 YSZ is defined. 5%25 mole Yb-doped SrZrO3(5Yb-SZ) and favored pyrochlores such as Gd2r2O7 and GdYbZr2O7 are found to be better mitigating CMAS attacks

Microstructural evaluation with type i hot corrosion degradation of gas turbine alloys during burner-rig testing

The hot corrosion resistance of selected gas turbine alloys was evaluated, as a baseline for assessing candidate new hot-section materials. The alloys were tested under burner rig exposures, using ASTM standard seawater for the salt contaminant and combustion conditions that provide representative materials evolution and degradation behavior relative to what is observed with marine gas turbines under service environments. Modern characterization techniques were utilized to evaluate the hot corrosion behavior and resistance of the evaluated material systems, to observe the degradation of the alloys and to study the underlying degradation mechanisms active during hot corrosion attack. Please click Additional Files below to see the full abstract

Volatile Analysis by Pyrolysis of Regolith for Planetary Resource Exploration

The extraction and identification of volatile resources that could be utilized by humans including water, oxygen, noble gases, and hydrocarbons on the Moon, Mars, and small planetary bodies will be critical for future long-term human exploration of these objects. Vacuum pyrolysis at elevated temperatures has been shown to be an efficient way to release volatiles trapped inside solid samples. In order to maximize the extraction of volatiles, including oxygen and noble gases from the breakdown of minerals, a pyrolysis temperature of 1400 C or higher is required, which greatly exceeds the maximum temperatures of current state-of-the-art flight pyrolysis instruments. Here we report on the recent optimization and field testing results of a high temperature pyrolysis oven and sample manipulation system coupled to a mass spectrometer instrument called Volatile Analysis by Pyrolysis of Regolith (VAPoR). VAPoR is capable of heating solid samples under vacuum to temperatures above 1300 C and determining the composition of volatiles released as a function of temperature

Leaf colour as a signal of chemical defence to insect herbivores in wild cabbage (Brassica Oleracea)

Leaf colour has been proposed to signal levels of host defence to insect herbivores, but we lack data on herbivory, leaf colour and levels of defence for wild host populations necessary to test this hypothesis. Such a test requires measurements of leaf spectra as they would be sensed by herbivore visual systems, as well as simultaneous measurements of chemical defences and herbivore responses to leaf colour in natural host-herbivore populations. In a large-scale field survey of wild cabbage (Brassica oleracea) populations, we show that variation in leaf colour and brightness, measured according to herbivore spectral sensitivities, predicts both levels of chemical defences (glucosinolates) and abundance of specialist lepidopteran (Pieris rapae) and hemipteran (Brevicoryne brassicae) herbivores. In subsequent experiments, P. rapae larvae achieved faster growth and greater pupal mass when feeding on plants with bluer leaves, which contained lower levels of aliphatic glucosinolates. Glucosinolate-mediated effects on larval performance may thus contribute to the association between P. rapae herbivory and leaf colour observed in the field. However, preference tests found no evidence that adult butterflies selected host plants based on leaf coloration. In the field, B. brassicae abundance varied with leaf brightness but greenhouse experiments were unable to identify any effects of brightness on aphid preference or performance. Our findings suggest that although leaf colour reflects both levels of host defences and herbivore abundance in the field, the ability of herbivores to respond to colour signals may be limited, even in species where performance is correlated with leaf colour

Acute mountain sickness.

Acute mountain sickness (AMS) is a clinical syndrome occurring in otherwise healthy normal individuals who ascend rapidly to high altitude. Symptoms develop over a period ofa few hours or days. The usual symptoms include headache, anorexia, nausea, vomiting, lethargy, unsteadiness of gait, undue dyspnoea on moderate exertion and interrupted sleep. AMS is unrelated to physical fitness, sex or age except that young children over two years of age are unduly susceptible. One of the striking features ofAMS is the wide variation in individual susceptibility which is to some extent consistent. Some subjects never experience symptoms at any altitude while others have repeated attacks on ascending to quite modest altitudes. Rapid ascent to altitudes of 2500 to 3000m will produce symptoms in some subjects while after ascent over 23 days to 5000m most subjects will be affected, some to a marked degree. In general, the more rapid the ascent, the higher the altitude reached and the greater the physical exertion involved, the more severe AMS will be. Ifthe subjects stay at the altitude reached there is a tendency for acclimatization to occur and symptoms to remit over 1-7 days

31st Annual Meeting and Associated Programs of the Society for Immunotherapy of Cancer (SITC 2016) : part two

Background The immunological escape of tumors represents one of the main ob- stacles to the treatment of malignancies. The blockade of PD-1 or CTLA-4 receptors represented a milestone in the history of immunotherapy. However, immune checkpoint inhibitors seem to be effective in specific cohorts of patients. It has been proposed that their efficacy relies on the presence of an immunological response. Thus, we hypothesized that disruption of the PD-L1/PD-1 axis would synergize with our oncolytic vaccine platform PeptiCRAd. Methods We used murine B16OVA in vivo tumor models and flow cytometry analysis to investigate the immunological background. Results First, we found that high-burden B16OVA tumors were refractory to combination immunotherapy. However, with a more aggressive schedule, tumors with a lower burden were more susceptible to the combination of PeptiCRAd and PD-L1 blockade. The therapy signifi- cantly increased the median survival of mice (Fig. 7). Interestingly, the reduced growth of contralaterally injected B16F10 cells sug- gested the presence of a long lasting immunological memory also against non-targeted antigens. Concerning the functional state of tumor infiltrating lymphocytes (TILs), we found that all the immune therapies would enhance the percentage of activated (PD-1pos TIM- 3neg) T lymphocytes and reduce the amount of exhausted (PD-1pos TIM-3pos) cells compared to placebo. As expected, we found that PeptiCRAd monotherapy could increase the number of antigen spe- cific CD8+ T cells compared to other treatments. However, only the combination with PD-L1 blockade could significantly increase the ra- tio between activated and exhausted pentamer positive cells (p= 0.0058), suggesting that by disrupting the PD-1/PD-L1 axis we could decrease the amount of dysfunctional antigen specific T cells. We ob- served that the anatomical location deeply influenced the state of CD4+ and CD8+ T lymphocytes. In fact, TIM-3 expression was in- creased by 2 fold on TILs compared to splenic and lymphoid T cells. In the CD8+ compartment, the expression of PD-1 on the surface seemed to be restricted to the tumor micro-environment, while CD4 + T cells had a high expression of PD-1 also in lymphoid organs. Interestingly, we found that the levels of PD-1 were significantly higher on CD8+ T cells than on CD4+ T cells into the tumor micro- environment (p < 0.0001). Conclusions In conclusion, we demonstrated that the efficacy of immune check- point inhibitors might be strongly enhanced by their combination with cancer vaccines. PeptiCRAd was able to increase the number of antigen-specific T cells and PD-L1 blockade prevented their exhaus- tion, resulting in long-lasting immunological memory and increased median survival

Effects of Reinforcement Surface Morphology on Toughening of Brittle-Matrix Composites

The mechanical properties of brittle-matrix composites critically depend upon the nature of the reinforcement/matrix interface. Recent theoretical and experimental work has shown that the morphology of the reinforcement surface can play a dominant role in determining the toughening behavior in these materials. In this work, the role of reinforcement surface roughness is examined both analytically and experimentally. Measurements of the debonding and frictional sliding of rough fibers in glass matrices, obtained using a modified fiber pullout technique, show a significant dependence on fiber surface roughness. The effects of surface roughness are explored further by measuring systematic changes in the fiber sliding behavior with controlled fiber coatings. The available analytical models of rough fiber sliding are examined to interpret the experimental results