17,285 research outputs found
Fractional Quantum Hall states in the vicinity of Mott plateaus
We perform variational Monte-Carlo calculations to show that bosons in a
rotating optical lattice will form analogs of fractional quantum Hall states
when the tunneling is sufficiently weak compared to the interactions and the
deviation of density from an integer is commensurate with the effective
magnetic field. We compare the energies of superfluid and correlated states to
one-another and to the energies found in full configuration-interaction
calculations on small systems. We look at overlaps between our variational
states and the exact ground-state, characterizing the ways in which fractional
quantum Hall effect correlations manifest themselves near the Mott insulating
state. We explore the experimental signatures of these states.Comment: 6 pages, 4 figure
Performance results of a 300-degree linear phase modulator for spaceborne communications applications
A phase modulator capable of large linear phase deviation, low loss, and wide band operation with good thermal stability was developed for deep space spacecraft transponder (DST) applications at X-band (8.415 GHz) and Ka-band (32 GHz) downlinks. The design uses a two-stage circulator-coupled reflection phase shifter with constant gamma hyperabrupt varactors and an efficient modulator driver circuit to obtain a phase deviation of +/-2.5 rad with better than 8 percent linearity. The measured insertion loss is 6.6 dB +/- 0.35 dB at 8415 MHz. Measured carrier and relative sideband amplitudes resulting from phase modulation by sine wave and square modulating functions agree well with the predicted results
Solar Orbiter: Exploring the Sun-heliosphere connection
The heliosphere represents a uniquely accessible domain of space, where
fundamental physical processes common to solar, astrophysical and laboratory
plasmas can be studied under conditions impossible to reproduce on Earth and
unfeasible to observe from astronomical distances. Solar Orbiter, the first
mission of ESA's Cosmic Vision 2015-2025 programme, will address the central
question of heliophysics: How does the Sun create and control the heliosphere?
In this paper, we present the scientific goals of the mission and provide an
overview of the mission implementation.Comment: 52 pages, 21 figures, 125 references; accepted for publication in
Solar Physic
Intrauterine repair of gastroschisis in fetal rabbits
Objective: Infants with gastroschisis (GS) still face severe morbidity. Prenatal closure may prevent gastrointestinal organ damage, but intrauterine GS repair (GSR) has not been established yet. Methods: In New Zealand White rabbits we developed and compared GS versus GSR: creation of GS was achieved by hysterotomy, right-sided laparotomy of the fetus and pressure on the abdominal wall to provoke evisceration. GSR was accomplished by careful reposition of eviscerated organs and a running suture of the fetal abdominal wall. For study purposes, 18 animals were divided equally into 3 groups: GS, GS with GSR after 2 h, and unmanipulated controls (C). Vitality was assessed by echocardiography. After 5 h all animals were sacrificed. Results: GSR inflicted no increased mortality, because all fetuses survived GS or GS with GSR. All fetuses with GS demonstrated significant evisceration of abdominal organs. In contrast, the abdominal wall of the fetuses from GSR was intact. Conclusion:The present animal model demonstrated the technical feasibility and success of an intrauterine repair of GS for the first time. However, further long-term studies (leaving GS and GSR in utero for several days) will be necessary to compare survival rates and intestinal injury, motility or absorption. The clinical application of GSR in utero remains a vision so far. Copyright (C) 2003 S. Karger AG, Basel
Design and analysis of a low-loss linear analog phase modulator for deep space spacecraft X-band transponder applications
This article summarizes the design concepts, analyses, and development of an X-band (8145 MHz) transponder low-loss linear phase modulator for deep space spacecraft applications. A single-section breadboard circulator-coupled reflection phase modulator has been analyzed, fabricated, and evaluated. A linear phase deviation of 92 deg with a linearity tolerance of +/- 8 percent was measured for this modulator from 8257 MHz to 8634 MHz over the temperature range -20 to 75 C. The measured insertion loss and the static delay variation with temperature were 2 +/- 0.3 dB and 0.16 psec/ C, respectively. Based on this design, cascaded sections have been modeled, and simulations were performed to provide an X-band deep space transponder (DST) phase modulator with +/- 2.5 radians (+/- 143 deg) of peak phase deviation to accommodate downlink signal modulation with composite telemetry data and ranging, with a deviation linearity tolerance of +/- 8 percent and insertion loss of less than 10 +/- 0.5 dB. A two-section phase modulator using constant gamma hyperabrupt varactors and an efficient modulator driver circuit was breadboarded. The measured results satisfy the DST phase-modulator requirements and show excellent agreement with the predicted results
ATLAS Monitored Drift Tube Chambers in E = 11 MeV Neutron Background
The influence of fast neutrons on the occupancy and the single tube
resolution of ATLAS muon drift detectors was investigated by exposing a chamber
built out of 3 layers of 3 short standard drift tubes to neutron flux-densities
of up to 16 kHz/cm2 at a neutron energy of E=11 MeV. Pulse shape capable NE213
scintillaton detectors and a calibrated BF3 neutron detector provided
monitoring of the neutron flux-density and energy. The sensitivity of the drift
chamber to the neutrons was measured to be 4*10-4 by comparing data sets with
and without neutron background. For the investigation of tracks of cosmic muons
two silicon-strip detectors above and underneath the chamber allow to compare
measured drift-radii with reference tracks. Alternatively, the single tube
resolution was determined using the triple-sum method. The comparison between
data with and without neutron irradiation shows only a marginal effect on the
resolution and little influence on the muon track reconstruction.Comment: 4 pages, 11 figures, conferenc
Bonding machine for forming a solar array strip
A machine is described for attaching solar cells to a flexable substrate on which printed circuitry has been deposited. The strip is fed through: (1) a station in which solar cells are elevated into engagement with solder pads for the printed circuitry and thereafter heated by an infrared lamp; (2) a station at which flux and solder residue is removed; (3) a station at which electrical performance of the soldered cells is determined; (4) a station at which an encapsulating resin is deposited on the cells; (5) a station at which the encapsulated solar cells are examined for electrical performance; and (6) a final station at which the resulting array is wound on a takeup drum
Sudbury project (University of Muenster-Ontario Geological Survey): Field studies 1984-1989 - summary of results
In cooperation between the Ontario Geological Survey and the Institute of Geology and Institute of Planetology, geological, petrological, and geochemical studies were carried out on impact-related phenomena of the Sudbury structure during the last decade. The main results of the field studies are briefly reviewed. Footwall rocks, sublayer, and lower sections of the Sudbury Igneous Complex (SIC) were mainly mapped and sampled in the northern (Levack Township) and western (Trillabelle and Sultana Properties) parts of the north range. Within these mapping areas Sudbury Breccias (SB) and Footwall Breccias (FB) were studied; SB were also investigated along extended profiles beyond the north and south ranges up to 55 km from the SIC. The Onaping Formation (OF) and the upper section of the SIC were studied both in the north range (Morgan and Dowling Townships) and in the southern east range (Capreol and McLennan Townships)
- …