2,342 research outputs found

    The Intergenerational Income Elasticity in the NLSY97 Dataset

    Get PDF
    This paper estimates the intergenerational income elasticity for four differently related groups. The results are IGE’s of 0.1368 between fathers and sons, 0.1734 between fathers and daughters, 0.2076 between mothers and sons and 0.2217 between mothers and daughters. These results are compared to previous studies and found to be significantly lower. Possible explanations are the simple passing of time between studies, the financial recession of 2008, and short-run data availability in the dataset. This study includes many control variables to find explanations of the IGE. The level of schooling is of sole importance and explains up to 49 percent of the IGE for fathers and around 33 percent of the IGE for mothers

    Safe Product Design - The Role of the NDE Reliability Analysis

    Get PDF
    When pushed to the limits of their detection capability, NDE systems do not produce con-sistent hit/miss indications. Their capability of detecting small defects is therefore expressed in terms of POD. An adequate NDE system is required to ensure the structural integrity. In conventional signal response analysis, the POD is expressed as a function of the defect size, and its adequacy for the inspection task is tested against the maximum allowable defect size which will not undermine the structural integrity. Analyses of modern structures show that other parameters, beside the defect size, can both significantly influence the POD and determine the severity of the defect for the structure. Within the multi-parameter reliability analysis, the POD is expressed as a function of those influencing parameters. When determining the adequacy of the NDE system, the capability of detecting a defect has to be expressed and tested against the critical value of exactly that parameter that determines defects severity for the structure. Failing to do so can lead to a rejection of the healthy, or acceptance of the bad part. The principle is demonstrated on the example of the Transmit-Receive Longitudinal (TRL) ultrasonic inspection of the iron cast component for semi-elliptical surface defects

    Regulation of the Branch point between the glyoxylate shunt and the TCA cycle in mycobacteria

    Get PDF
    Master'sJOINT M.SC. IN INFECTIOUS DISEASES, VACCINOLOGY AND DRUG DISCOVER

    Antifungal defense of probiotic Lactobacillus rhamnosus GG is mediated by blocking adhesion and nutrient depletion

    Get PDF
    Data Availability: All relevant data are available from the Gene Expression Omnibus at the following accession number: GSE97755. Funding: This work was funded by the German Research Council (DFG) Graduation College 685, Dr. Jekyll and Mr. Hyde: A systems approach to the therapy of nosocomial infections caused by Candida albicans: a commensal organism switches to a deadly pathogen/ PTJ (FKZ: 0315409BBMBF), the Dr. Manfred Plempel-foundation, the Dr. Siegried Stettendorf-Foundation, the InfectERA Program (FunComPath; BMBF FKZ 031L0001A), the Integrated Research and Treatment Center for Sepsis Control and Care (CSCC) project CanBac (BMBF, FKZ: 01EO1002), and the German Research Council (DFG) GZ:HE7565/1-1. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.Peer reviewedPublisher PD

    Microstructural Evolution During Hot Rolling of an AZ31 Mg Alloy

    Get PDF
    The microstructural evolution of a AZ31 Mg alloy during hot rolling has been investigated using optical microscopy and texture (macro and micro) analysis as the main characterization tools. In particular, the differences between the microstructure obtained by unidirectional rolling (UR) and cross rolling (CR) are studied. Significant twinning activity is observed in both cases. Additionally, after cross rolling, a rather heterogeneous microstructure develops, with scattered regions populated by very fine grains. The strong basal fiber texture of the as-received material remains present after both hot rolling schemes. The imposibility to obtain accurate EBSD measurements within the twinned regions suggests that significant localized deformation takes place in those areas. Thus, due to the increase in the local strain energy, these regions become preferential sites for nucleation of recrystallization.Peer reviewe

    Modeling the spatial distribution of grazing intensity in Kazakhstan

    Get PDF
    <div><p>With increasing affluence in many developing countries, the demand for livestock products is rising and the increasing feed requirement contributes to pressure on land resources for food and energy production. However, there is currently a knowledge gap in our ability to assess the extent and intensity of the utilization of land by livestock, which is the single largest land use in the world. We developed a spatial model that combines fine-scale livestock numbers with their associated energy requirements to distribute livestock grazing demand onto a map of energy supply, with the aim of estimating where and to what degree pasture is being utilized. We applied our model to Kazakhstan, which contains large grassland areas that historically have been used for extensive livestock production but for which the current extent, and thus the potential for increasing livestock production, is unknown. We measured the grazing demand of Kazakh livestock in 2015 at 286 Petajoules, which was 25% of the estimated maximum sustainable energy supply that is available to livestock for grazing. The model resulted in a grazed area of 1.22 million km<sup>2</sup>, or 48% of the area theoretically available for grazing in Kazakhstan, with most utilized land grazed at low intensities (average off-take rate was 13% of total biomass energy production). Under a conservative scenario, our estimations showed a production potential of 0.13 million tons of beef additional to 2015 production (31% increase), and much more with utilization of distant pastures. This model is an important step forward in evaluating pasture use and available land resources, and can be adapted at any spatial scale for any region in the world.</p></div

    Enzyme-functionalized biomimetic apatites: concept and perspectives in view of innovative medical approaches

    Get PDF
    Biomimetic nanocrystalline calcium-deficient apatite compounds are particularly attractive for the setup of bioactive bone-repair scaffolds due to their high similarity to bone mineral in terms of chemical composition, structural and substructural features. As such, along with the increasingly appealing development of moderate temperature engineered routes for sample processing, they have widened the armamentarium of orthopedic and maxillofacial surgeons in the field of bone tissue engineering. This was made possible by exploiting the exceptional surface reactivity of biomimetic apatite nanocrystals, capable of easily exchanging ions or adsorbing (bio)molecules, thus leading to highly-versatile drug delivery systems. In this contribution we focus on the preparation of hybrid materials combining biomimetic nanocrystalline apatites and enzymes (lysozyme and subtilisin). This paper reports physico-chemical data as well as cytotoxicity evaluations towards Cal-72 osteoblast-like cells and finally antimicrobial assessments towards selected strains of interest in bone surgery. Biomimetic apatite/enzyme hybrids could be prepared in varying buffers. They were found to be non-cytotoxic toward osteoblastic cells and the enzymes retained their biological activity (e.g. bond cleavage or antibacterial properties) despite the immobilization and drying processes. Release properties were also examined. Beyond these illustrative examples, the concept of biomimetic apatites functionalized with enzymes is thus shown to be useable in practice, e.g. for antimicrobial purposes, thus widening possible therapeutic perspectives

    Molecular analysis of the interaction between cardosin A and phospholipase Dα

    Get PDF
    Cardosin A is an RGD-containing aspartic proteinase from the stigmatic papillae of Cynara cardunculus L. A putative cardosin A-binding protein has previously been isolated from pollen suggesting its potential involvement in pollen2013pistil interaction [Faro C, Ramalho-Santos M, Vieira M, Mendes A, Simões I, Andrade R, Verissimo P, Lin X, Tang J & Pires E (1999) J Biol Chem274, 28724201328729]. Here we report the identification of phospholipase D03B1 as a cardosin A-binding protein. The interaction was confirmed by coimmunoprecipitation studies and pull-down assays. To investigate the structural and molecular determinants involved in the interaction, pull-down assays with cardosin A and various glutathione S-transferase-fused phospholipase D03B1 constructs were performed. Results revealed that the C2 domain of phospholipase D03B1 contains the cardosin A-binding activity. Further assays with mutated recombinant forms of cardosin A showed that the RGD motif as well as the unprecedented KGE motif, which is structurally and charge-wise very similar to RGD, are indispensable for the interaction. Taken together our results indicate that the C2 domain of plant phospholipase D03B1 can act as a cardosin A-binding domain and suggest that plant C2 domains may have an additional role as RGD/KGE-recognition domains

    Being More Realistic About Reasons: On Rationality and Reasons Perspectivism

    Get PDF
    This paper looks at whether it is possible to unify the requirements of rationality with the demands of normative reasons. It might seem impossible to do because one depends upon the agent’s perspective and the other upon features of the situation. Enter Reasons Perspectivism. Reasons perspectivists think they can show that rationality does consist in responding correctly to reasons by placing epistemic constraints on these reasons. They think that if normative reasons are subject to the right epistemic constraints, rational requirements will correspond to the demands generated by normative reasons. While this proposal is prima facie plausible, it cannot ultimately unify reasons and rationality. There is no epistemic constraint that can do what reasons perspectivists would need it to do. Some constraints are too strict. The rest are too slack. This points to a general problem with the reasons-first program. Once we recognize that the agent’s epistemic position helps determine what she should do, we have to reject the idea that the features of the agent’s situation can help determine what we should do. Either rationality crowds out reasons and their demands or the reasons will make unreasonable demands
    corecore