Morphological and micro-structural interface characterization in multilayer inverted polymer-fullerene bulk heterojunction solar cells

Inverted polymer solar cells based on P3HT/PCBM bulk heterojunction were prepared on flexible polyethylene naphthalate (PEN) substrate. The effect of annealing of the PEN/ITO/ZnO multilayer and ZnO/P3HT:PCBM on the structural, morphological, photophysical and photovoltaic properties was investigated and scrutinized directly on the OPV devices using atom probe tomography (APT), scanning electron microscopy (SEM) and microfocus X-ray techniques. We carried out a 3D reconstruction of the interfaces of the multilayer containing PEN/ITO, ZnO/ITO and P3HT:PCBM/ZnO to address the interface micro-structure and its influence on the morphology of the photoactive film. The analyses show that the morphology of the interfaces is affected by the structure of each layer of the BHJ devices causing orientation of P3HT crystals with PCBM aggregates and ZnO, which in turn leads to a significant change of the charge transport across each layer and therefore photovoltaic performances

Hard X-ray standing-wave photoemission insights into the structure of an epitaxial Fe/MgO multilayer magnetic tunnel junction

The Fe/MgO magnetic tunnel junction is a classic spintronic system, with current importance technologically and interest for future innovation. The key magnetic properties are linked directly to the structure of hard-to-access buried interfaces, and the Fe and MgO components near the surface are unstable when exposed to air, making a deeper probing, nondestructive, in-situ measurement ideal for this system. We have thus applied hard X-ray photoemission spectroscopy (HXPS) and standing-wave (SW) HXPS in the few kilo-electron-volt energy range to probe the structure of an epitaxially grown MgO/Fe superlattice. The superlattice consists of 9 repeats of MgO grown on Fe by magnetron sputtering on an MgO(001) substrate, with a protective Al2O3 capping layer. We determine through SW-HXPS that 8 of the 9 repeats are similar and ordered, with a period of 33 ± 4 Å, with the minor presence of FeO at the interfaces and a significantly distorted top bilayer with ca. 3 times the oxidation of the lower layers at the top MgO/Fe interface. There is evidence of asymmetrical oxidation on the top and bottom of the Fe layers. We find agreement with dark-field scanning transmission electron microscope (STEM) and X-ray reflectivity measurements. Through the STEM measurements, we confirm an overall epitaxial stack with dislocations and warping at the interfaces of ca. 5 Å. We also note a distinct difference in the top bilayer, especially MgO, with possible Fe inclusions. We thus demonstrate that SW-HXPS can be used to probe deep buried interfaces of novel magnetic devices with few-angstrom precision

Role of domain walls in the abnormal photovoltaic effect in BiFeO3

Recently, the anomalous photovoltaic (PV) effect in BiFeO3 (BFO) thin films, which resulted in open circuit voltages (V-oc) considerably larger than the band gap of the material, has generated a revival of the entire field of photoferroelectrics. Here, via temperature-dependent PV studies, we prove that the bulk photovoltaic (BPV) effect, which has been studied in the past for many non-centrosymmetric materials, is at the origin of the anomalous PV effect in BFO films. Moreover, we show that irrespective of the measurement geometry, V-oc as high as 50V can be achieved by controlling the conductivity of domain walls (DW). We also show that photoconductivity of the DW is markedly higher than in the bulk of BFO

All-in-one synthesis of mesoporous silicon nanosheets from natural clay and their applicability to hydrogen evolution

Silicon nanosheets have attracted much attention owing to their novel electronic and optical properties and compatibility with existing silicon technology. However, a cost-effective and scalable technique for synthesizing these nanosheets remains elusive. Here, we report a novel strategy for producing silicon nanosheets on a large scale through the simultaneous molten-salt-induced exfoliation and chemical reduction of natural clay. The silicon nanosheets thus synthesized have a high surface area, are ultrathin (similar to 5 nm) and contain mesoporous structures derived from the oxygen vacancies in the clay. These advantages make the nanosheets a highly suitable photocatalyst with an exceptionally high activity for the generation of hydrogen from a water-methanol mixture. Further, when the silicon nanosheets are combined with platinum as a cocatalyst, they exhibit high activity in KOH (15.83 mmol H-2 per s per mol Si) and excellent photocatalytic activity with respect to the evolution of hydrogen from a water-methanol mixture (723 mu mol H-2 per h per g Si).clos

Structural, Magnetic, Magnetocaloric, and Critical Exponent Properties of La0.67Sr0.33MnO3 Powders Synthesized by Solid-State Reaction

International audienc

Electronic structure, hyperfine parameters and magnetic properties of RFe11Ti intermetallic compounds (R = Y, Pr): Ab initio calculations, SQUID magnetometry and Mössbauer studies

International audienc

Annealing Effect on the Structural and Magnetic Properties of Granular Cu80Fe10Ni10 Ribbons

International audienc

Large reversible magnetocaloric effect in antiferromagnetic Ho2O3 powders

International audienc