Structural instabilities during cyclic loading of ultrafine-grained copper studied with micro bending experiments

The cyclic mechanical properties and microstructural stability of severe plastically deformed copper were investigated by means of micro bending experiments. The ultrafine-grained structure of OFHC copper was synthesized utilizing the high pressure torsion (HPT) technique. Micron sized cantilevers were focused-ion-beam milled and subsequently tested within a scanning electron microscope in the low cycle fatigue regime at strain amplitudes in the range of 1.1 − 3.2 ∗ 10−3. It was found that HPT processed ultra-fine grained copper is prone to cyclic softening, which is a consequence of grain coarsening in the absence of shear banding in the micro samples. Novel insights into the grain coarsening mechanism were revealed by quasi in-situ EBSD scans, showing i) continuous migration of high angle grain boundaries, ii) preferential growth of larger grains at the expense of adjacent smaller ones, iii) a reduction of misorientation gradients within larger grains if the grain structure in the neighborhood is altered and iv) no evidence that a favorable crystallographic orientation drives grain growth during homogeneous coarsening at moderate accumulated strains, tested here

Coherent radiation of an ultra-relativistic charged particle channeled in a periodically bent crystal

We suggest a new type of the undulator radiation which is generated by an ultra-relativistic particle channeled along a periodically bent crystallographic plane or axis. The electromagnetic radiation arises mainly due to the bending of the particle's trajectory, which follows the shape of the channel. The parameters of this undulator, which totally define the spectrum and the angular distribution of the radiation (both spontaneous and stimulated), depend on the type of the crystal and the crystallographic plane (axis), on the type of a projectile and its energy, and on the shape of the bent channel, and, thus, can be varied significantly by varying these characteristics. As an example, we consider the acoustically induced radiation (AIR) which is generated by ultra-relativistic particles channeled in a crystal which is bent by a transverse acoustic wave. The AIR mechanism allows to make the undulator with the main parameters varying in wide ranges, which are inaccessible in the undulators based on the motion of particles in the periodic magnetic fields and also in the field of the laser radiation. The intensity of AIR can be easily made larger than the intensity of the radiation in a linear crystal and can be varied in a wide range by varying the frequency and the amplitude of the acoustic wave in the crystal. A possibility to generate stimulated emission of high-energy photons (in keV - MeV region) is also discussed.Comment: published in J. Phys. G: Nucl. Part. Phys. 24 (1998) L45-L53, http://www.iop.or

The new MTLRS transmitting system

This paper presents a detailed description about the new transmitting system of the Modular Transportable Laser Ranging Systems MTLRS-1/2. A simplified theory of the Self Filtering Unstable Resonator (SFUR) is explained. Laser design details are discussed concerning the extreme environmental conditions in which these mobile systems are operating. Details are given concerning the new avalanche START detector. The new SFUR laser and START detector are necessary parts in order to bring both mobile systems towards 1 cm ranging accuracy

Assessing the intergranular crack initiation probability of a grain boundary distribution by an experimental misalignment study of adjacent slip systems

Crack initiation at grain boundaries due to blocked slip transfer of dislocations is a main failure mechanism during the fatigue of metals. A quantification of the resistance effect of a grain boundary is needed to assess a textured or texture-free microstructure for fatigue strength. Geometric approaches based on the misalignment of slip systems in adjacent grains are widely used. Hence, we validated the geometric transmission factor of Shen et al. in coarse-grained high-purity aluminum under the assumption that the combination of a large slip activity and a blocked slip at a grain boundary leads to intergranular crack initiation and revealed that a detailed knowledge of the 3D-orientation of the grain boundary is essential. Thereby we gathered information about the 3D-microstructure using FIB-cross-sectioning. Hence it is possible to evaluate potential crack initiation sites for a specific microstructure or to estimate the fatigue strength of a textured microstructure in terms of a crack initiation probability

Results of the MTLRS-1 upgrade

In this report, the results of the upgrade of the German Modular Transportable Laser Ranging System MTLRS-1 are summarized. A short description of the new components and their influence on the system accuracy is given. It is shown, that the single shot accuracy of the MTLRS-1 has been improved from 5 cm to 1 cm

Photon emission by an ultra-relativistic particle channeling in a periodically bent crystal

This paper is devoted to a detailed analysis of the new type of the undulator radiation generated by an ultra-relativistic charged particle channeling along a crystal plane, which is periodically bent by a transverse acoustic wave, as well as to the conditions limiting the observation of this phenomenon. This mechanism makes feasible the generation of electromagnetic radiation, both spontaneous and stimulated, emitted in a wide range of the photon energies, from X- up to gamma-rays

Three-Electrode Study of Electrochemical Ionomer Degradation Relevant to Anion-Exchange-Membrane Water Electrolyzers

Among existing water electrolysis (WE) technologies, anion-exchange-membrane water electrolyzers (AEMWEs) show promise for low-cost operation enabled by the basic solid-polymer electrolyte used to conduct hydroxide ions. The basic environment within the electrolyzer, in principle, allows the use of non-platinum-group metal catalysts and less-expensive cell components compared to acidic-membrane systems. Nevertheless, AEMWEs are still underdeveloped, and the degradation and failure modes are not well understood. To improve performance and durability, supporting electrolytes such as KOH and K2CO3 are often added to the water feed. The effect of the anion interactions with the ionomer membrane (particularly other than OH-), however, remains poorly understood. We studied three commercial anion-exchange ionomers (Aemion, Sustainion, and PiperION) during oxygen evolution (OER) at oxidizing potentials in several supporting electrolytes and characterized their chemical stability with surface-sensitive techniques. We analyzed factors including the ionomer conductivity, redox potential, and pH tolerance to determine what governs ionomer stability during OER. Specifically, we discovered that the oxidation of Aemion at the electrode surface is favored in the presence of CO32-/HCO3- anions perhaps due to the poor conductivity of that ionomer in the carbonate/bicarbonate form. Sustainion tends to lose its charge-carrying groups as a result of electrochemical degradation favored in basic electrolytes. PiperION seems to be similarly negatively affected by a pH drop and low carbonate/bicarbonate conductivity under the applied oxidizing potential. The insight into the interactions of the supporting electrolyte anions with the ionomer/membrane helps shed light on some of the degradation pathways possible inside of the AEMWE and enables the informed design of materials for water electrolysis

Electrical properties of ZnO nanorods studied by conductive atomic force microscopy

ZnO nanostructures are promising candidates for the development of novel electronic devices due to their unique electrical and optical properties. Here, we present a complementary electrical characterization of individual upright standing and lying ZnO nanorods using conductive atomic force microscopy (C-AFM). Initially, the electrical properties of the arrays of upright standing ZnO NRs were characterized using two-dimensional current maps. The current maps were recorded simultaneously with the topography acquired by contact mode AFM. Further, C-AFM was utilized to determine the local current-voltage (I-V) characteristics of the top and side facets of individual upright standing NRs. Current-voltage characterization revealed a characteristic similar to that of a Schottky diode. Detailed discussion of the electrical properties is based on local I-V curves, as well as on the 2D current maps recorded from specific areas. © 2011 American Institute of Physics.published_or_final_versio

Channeling of Positrons through Periodically Bent Crystals: on Feasibility of Crystalline Undulator and Gamma-Laser

The electromagnetic radiation generated by ultra-relativistic positrons channelling in a crystalline undulator is discussed. The crystalline undulator is a crystal whose planes are bent periodically with the amplitude much larger than the interplanar spacing. Various conditions and criteria to be fulfilled for the crystalline undulator operation are established. Different methods of the crystal bending are described. We present the results of numeric calculations of spectral distributions of the spontaneous radiation emitted in the crystalline undulator and discuss the possibility to create the stimulated emission in such a system in analogy with the free electron laser. A careful literature survey covering the formulation of all essential ideas in this field is given. Our investigation shows that the proposed mechanism provides an efficient source for high energy photons, which is worth to study experimentally.Comment: 52 pages, MikTeX, 14 figure

Gravitation, electromagnetism and cosmological constant in purely affine gravity

The Ferraris-Kijowski purely affine Lagrangian for the electromagnetic field, that has the form of the Maxwell Lagrangian with the metric tensor replaced by the symmetrized Ricci tensor, is dynamically equivalent to the metric Einstein-Maxwell Lagrangian, except the zero-field limit, for which the metric tensor is not well-defined. This feature indicates that, for the Ferraris-Kijowski model to be physical, there must exist a background field that depends on the Ricci tensor. The simplest possibility, supported by recent astronomical observations, is the cosmological constant, generated in the purely affine formulation of gravity by the Eddington Lagrangian. In this paper we combine the electromagnetic field and the cosmological constant in the purely affine formulation. We show that the sum of the two affine (Eddington and Ferraris-Kijowski) Lagrangians is dynamically inequivalent to the sum of the analogous ($\Lambda$CDM and Einstein-Maxwell) Lagrangians in the metric-affine/metric formulation. We also show that such a construction is valid, like the affine Einstein-Born-Infeld formulation, only for weak electromagnetic fields, on the order of the magnetic field in outer space of the Solar System. Therefore the purely affine formulation that combines gravity, electromagnetism and cosmological constant cannot be a simple sum of affine terms corresponding separately to these fields. A quite complicated form of the affine equivalent of the metric Einstein-Maxwell-$\Lambda$ Lagrangian suggests that Nature can be described by a simpler affine Lagrangian, leading to modifications of the Einstein-Maxwell-$\Lambda$CDM theory for electromagnetic fields that contribute to the spacetime curvature on the same order as the cosmological constant.Comment: 17 pages, extended and combined with gr-qc/0612193; published versio