Investigating Fatigue Performance on the Foamed Asphalt Specimens Generated Using Different Foam Properties

An evaluation of fatigue resistance for foamed asphalt mixture is very demanding since the binder is not continuously distributed on the aggregate surface and this mixtures contains water, the content of which dramatically affects the mechanical properties. This paper discusses the results of laboratory fatigue testingon the foamed asphalt mixtures in which the specimens are generated using three different foamed bitumen properties. Foamed bitumen as the binder was produced at three different foaming water content (FWC) at a temperature of 180oC using a 70/100 pen. The aggregates were mechanically mixed with foamed bitumen using a Hobart mixer. The resulting mixtures were then compacted using a gyratory compactor to generatespecimen with diameter of 100 mm. The specimens were fatigue tested at various stress levels at a temperature of 20oC following a curing period of 3 days at 40oC. Overall, fatigue performance of foamed asphalt can be identified based upon both stress and strain for mixtures produced at FWC 1%, 5%, and 10%

A new approach to measure reduction intensity on cores and tools on cobbles: the Volumetric Reconstruction Method

Knowing to what extent lithic cores have been reduced through knapping is an important step toward understanding the technological variability of lithic assemblages and disentangling the formation processes of archaeological assemblages. In addition, it is a good complement to more developed studies of reduction intensity in retouched tools, and can provide information on raw material management or site occupation dynamics. This paper presents a new methodology for estimating the intensity of reduction in cores and tools on cobbles, the Volumetric Reconstruction Method (VRM). This method is based on a correction of the dimensions (length, width, and thickness) of each core from an assemblage. The mean values of thickness and platform thickness of the assemblage’s flakes are used as corrections for the cores’ original dimensions, after its diacritic analysis. Then, based on these new dimensions, the volume or mass of the original blank are reconstructed using the ellipsoid volume formula. The accuracy of this method was experimentally tested, reproducing a variety of possible archaeological scenarios. The experimental results demonstrate a high inferential potential of the VRM, both in estimating the original volume or mass of the original blanks, and in inferring the individual percentage of reduction for each core. The results of random resampling demonstrate the applicability of VRM to non size-biased archaeological contexts.Introduction Methods - The Volumetric Reconstruction Method - Experimental design - Statistical procedures - Resamples Results - Geometric formulas - Reduction strategy and size - Resampling (randomly biased record) - Resampling (size bias) - Measuring the effect of number of generations Discussion and conclusion

Revealing the Structure of an Accretion Disk Through Energy Dependent X-ray Microlensing

We present results from monitoring observations of the gravitationally lensed quasar RX J1131-1231 performed with the Chandra X-ray Observatory. The X-ray observations were planned with relatively long exposures that allowed a search for energy-dependent microlensing in the soft (0.2-2 keV) and hard (2-10 keV) light curves of the images of RX J1131-1231. We detect significant microlensing in the X-ray light-curves of images A and D, and energy-dependent microlensing of image D. The magnification of the soft band appears to be larger than that in the hard band by a factor of ~ 1.3 when image D becomes more magnified. This can be explained by the difference between a compact, softer-spectrum corona that is producing a more extended, harder spectrum reflection component off the disk. This is supported by the evolution of the fluorescent iron line in image D over three consecutive time-averaged phases of the light curve. In the first period, a Fe line at E = 6.36(-0.16,+0.13) keV is detected (at > 99% confidence). In the second period, two Fe lines are detected, one at E = 5.47(-0.08,+0.06) keV (detected at > 99% confidence) and another at E = 6.02(-0.07,+0.09) keV (marginally detected at > 90% confidence), and in the third period, a broadened Fe line at 6.42(-0.15,+0.19) keV is detected (at > 99% confidence). This evolution of the Fe line profile during the microlensing event is consistent with the line distortion expected when a caustic passes over the inner disk where the shape of the fluorescent Fe line is distorted by General Relativistic and Doppler effects.Comment: 20 pages, includes 10 figures, submitted to Ap

Removing black-hole singularities with nonlinear electrodynamics

We propose a way to remove black hole singularities by using a particular nonlinear electrodynamics Lagrangian that has been recently used in various astrophysics and cosmological frameworks. In particular, we adapt the cosmological analysis discussed in a previous work to the black hole physics. Such analysis will be improved by applying the Oppenheimer-Volkoff equation to the black hole case. At the end, fixed the radius of the star, the final density depends only on the introduced quintessential density term $\rho_{\gamma}$ and on the mass.Comment: In this last updated version we correct two typos which were present in Eqs. (21) and (22) in the version of this letter which has been published in Mod. Phys. Lett. A 25, 2423-2429 (2010). In the present version, both of Eqs. (21) and (22) are dimensionally and analytically correc