149 research outputs found
Review on the Status of the Research on Power-to-Gas Experimental Activities
In recent years, power-to-gas technologies have been gaining ground and are increasingly proving their reliability. The possibility of implementing long-term energy storage and that of being able to capture and utilize carbon dioxide are currently too important to be ignored. However, systems of this type are not yet experiencing extensive realization in practice. In this study, an overview of the experimental research projects and the research and development activities that are currently part of the power-to-gas research line is presented. By means of a bibliographical and sitographical analysis, it was possible to identify the characteristics of these projects and their distinctive points. In addition, the main research targets distinguishing these projects are presented. This provides an insight into the research direction in this regard, where a certain technological maturity has been achieved and where there is still work to be done. The projects found and analyzed amount to 87, mostly at laboratory scale. From these, what is most noticeable is that research is currently focusing heavily on improving system efficiency and integration between components
a model for filter diagnostics in a syngas fed chp plant
Abstract Biomass gasification is an important opportunity for power generation and combined heat and power (CHP), as it allows for biomass use in high efficiency, low emissions energy systems, e.g., internal combustion engines. Biomass-based CHP is particularly interesting for the service sector, as it allows to use a programmable renewable energy source to produce both electricity and heat, unlike photovoltaic systems which are typically used in this sector. Yet, small-scale gasification and CHP systems have a poor diffusion, due to a lack of acknowledged reliability. To improve reliability and performance, accurate simulation models may be useful, in particular for system control and diagnosis. For this purpose, the project SYNBIOSE proposes the installation, testing and simulation of a commercial-grade system for the gasification of lignocellulosic woodchips and pellets coupled to CHP in the campus of the University of Parma. One of the project deliverables is a simulation model of the whole gasification and CHP plant, for system diagnosis. The model has a modular structure (to allow for improvements and applications) and is implemented in MATLAB®/Simulink®. The present work focuses on syngas filters, which are among the most critical components. The outcome is a model able to predict the operation of filters taking into account inlet gas characteristics and fouling. Model analysis, sensitivity analysis and validation showed that simulation outputs are consistent with the physical behavior and experimental data. The model proved to be useful for system and components simulation and diagnosis
a model for the prediction of pollutant species production in the biomass gasification process
Abstract This paper presents a non-stoichiometric equilibrium model for the simulation of biomass downdraft gasifiers. The chemical equilibrium is determined by minimizing the Gibbs free energy. Five elements characterize the biomass and 15 chemical species are considered in the syngas. The model calculates the lower heating value of the syngas and the relative abundances of gasification products. An advantage of this model is that it can easily calculate not only the concentrations of the main gasification products, but also the concentrations of minor product, especially the pollutant chemical species containing Nitrogen and Sulfur. To analyse the model behaviour, a sensitivity analysis on process parameters is presented. The model is validated by comparing its results with the results of simulation carried out with a stoichiometric model and with experimental data found in literature. Finally, the model is applied to the study of the gasification of forest waste
Analysis of the Status of Research and Innovation Actions on Electrofuels under Horizon 2020
Europe stated the ambitious target of becoming carbon neutral by 2050 to combat climate change and meet the requirements imposed by the Paris Agreement, and renewable energy has proved to be a promising solution for the decarbonization of many sectors. Nonetheless, their aleatory nature leads to grid unbalances due to the difference between supply and demand. Storage solutions are needed, and electrofuels become a key factor in this context: they are fuels produced from electricity, which leads to carbon-neutral fuels if it originates from renewable sources. These can constitute a key solution to store the surplus energy and to decarbonize the so-called hard-to-abate sectors. Electrofuel production technologies have not yet been fully developed, and, in this context, extensive study of the state-of-the-art of existing projects can be very useful for researchers and developers. This work researches the European projects funded by the Horizon 2020 Programme regarding electrofuel production. The projects were analyzed in-depth using specific features, and the results were presented
The Status of Research and Innovation on Heating and Cooling Networks as Smart Energy Systems within Horizon 2020
The European Union is funding scientific research through the Horizon 2020 Framework Programme. Since the key priorities for the next few decades are the reduction in carbon emissions and the enhancement of energy system conversion efficiency, a collection of the most recent research projects can be beneficial to researchers and stakeholders who want to easily access and identify recent innovation in the energy sector. This paper proposes an overview of the Horizon 2020 projects on smart distributed energy systems, with particular focus on heating and cooling networks and their efficient management and control. The characteristics of the selected projects are summarized, and the relevant features, including the energy vectors involved, main applications and expected outputs are reported and analyzed. The resulting framework fosters the deployment of digital technologies and software platforms to achieve smart and optimized energy systems
Analysis of Inlet Air Cooling for IGCC Power Augmentation
Abstract Integrated Gasification Combined Cycles are energy systems mainly composed of a gasifier and a combined cycle power plant. Since the gasification process usually requires oxygen as an oxidant, an air separation unit is also part of the plant. Moreover, a producer gas cleaner unit is always present between the gasifier and the gas turbine. With respect to Natural Gas Combined Cycles, IGCCs are characterized by a consistent loss in the overall plant efficiency due to the conversion of the raw fuel in the gasifier and the electrical power parasitized for fuel production which considerably reduce the plant net electric power. Moreover, since these plants are based on gas-steam combined cycle power plants they suffer from a reduction in performance (a further net power decrease) when ambient temperature increases. Regarding this latter topic, different systems are currently used in gas turbine and combined cycle power plants in order to reduce gas turbine inlet air temperature, and, therefore, the impact of ambient conditions on performances. In this paper, a review of these systems is presented. Both systems based on water evaporative cooling and on refrigeration by means of absorption or mechanical/electrical chillers are described. Thermodynamic models of the systems are built within the framework of a commercial code for the simulation of energy conversion systems. A sensitivity analysis on the main parameters is presented. Finally, the models are applied to study the capabilities of the different systems by imposing the real temperature profiles of different sites for a whole year
real gas expansion with dynamic mesh in common positive displacement machines
Abstract Fluids processed by the machinery involved in ORC cycles undergo several transformations among which the expansion in positive displacement machines. The fluid path inside this component is very complicated and gaps play a crucial role. Due to the importance of this technical detail, gap design and optimization is a decisive step in achieving an high efficiency both of the expander and the whole cycle. In this work the fluid dynamics of several fluids commonly used in ORC cycles is investigated. Particularly, their behaviour during the expansion through the gap in operation is numerically investigated. The effects of the gap formation and its evolution on the processed fluid is studied thanks to a dynamic mesh approach. A typical application has been considered in this work: the variable gap between the fixed and mobile spirals of a scroll expander is analysed. The relative motion and in turn, the variation of the gaps during the machine operation, implies the use of particular numerical strategies able to well represent these localized geometrical features. On the top of that, the modelling of the processed fluids as a real gas determines an extra effort in the way of representing the actual behavior involved in the positive displacement machine operation. This analysis shows the local fluid dynamic phenomena due to the variable clearances. R134a and its replacements R152a and R1234ze(E), fluids widespread in the ORC cycles, are used in this work. The fluids are investigated under the same conditions and effects like separation and shock wave are highlighted. This analysis allows the comprehension of how local phenomena could affect the overall machine operation and efficiency. Gaps are the responsible of the volumetric efficiency of the machine and, coupled with (i) time-variable geometry modification, (ii) relative velocities and (iii) fluid characteristics characterize the global ORC system performance
a library for the simulation of smart energy systems the case of the campus of the university of parma
Abstract Smart energy systems are complex systems (i.e. composed of windmills, PV panels, solar collectors, heat pumps, CHP systems, etc) in which synergies rise through the ICT (Information and Communications Technology) based management and control of the whole system. In the development of efficient smart energy systems, a fundamental step is the optimization of total energy conversion, transmission and utilization processes within the whole system. To this extent, mathematical models can represent very useful tools for the simulation of the behavior of the system. In this paper, a library for the dynamic simulation of smart energy systems is presented. The library is implemented in Matlab ® /Simulink ® and each component (i.e. the energy conversion and distribution systems and the end-users) is developed through a modular approach. Therefore, the modules are designed by considering a standardized input/output and causality structure. Finally, the capabilities of this approach are evaluated through the application to the district heating and cooling network of the Campus of the University of Parma. The case study is based on a branch which feeds twelve buildings with a total heating volume of about 150 000 m 3 and peak thermal power demand of about 8 MW. Results reported in the paper demonstrate the effectiveness of this approach and the capability in term of system optimization
Optimization of Load Allocation Strategy of a Multi-source Energy System by Means of Dynamic Programming
AbstractMulti-source systems for the fulfillment of electric, thermal and cooling demand of a building can be based on different technologies (e.g. solar photovoltaic, solar heating, cogeneration, heat pump, absorption chiller) which use renewable, partially renewable and fossil energy sources. The main issues of these kinds of multi-source systems are (i) the allocation strategy which allows the division of the energy demands among the various technologies and (ii) the proper sizing of each technology.Furthermore, these two issues proves to be deeply interrelated because, while a wiser energy demand allocation strategy can lead to significant reductions in primary energy consumption, the definition itself of an optimal allocation strategy strongly depends on the actual sizing of the employed technologies. Thus the problem of optimizing the sizing of each technology cannot be separated from the definition of an optimal control strategy. For this purpose a model of a multi-source energy system, previously developed and implemented in the Matlab® environment, has been considered. The model takes account of the load profiles for electricity, heating and cooling for a whole year and the performance of the energy systems are modelled through a systemic approach. A dynamic programming algorithm is therefore employed in order to obtain an optimal control strategy for the energy demand allocation during the winter period. While the resulting control strategy is non-causal and therefore not suitable for the implementation on a real-time application, it allows the definition of a benchmark on the maximum primary energy savings achievable with a specific sizing solution. This result is therefore very helpful both in comparing different solutions and in subsequently define a proper causal control strategy. Finally, the model is applied to the case of a thirteen-floors tower composed of a two-floor shopping mall at ground level and eleven floors used as offices
Experimental investigation on CO2methanation process for solar energy storage compared to CO2-based methanol synthesis
The utilization of the captured CO2 as a carbon source for the production of energy storage media offers a technological solution for overcoming crucial issues in current energy systems. Solar energy production generally does not match with energy demand because of its intermittent and non-programmable nature, entailing the adoption of storage technologies. Hydrogen constitutes a chemical storage for renewable electricity if it is produced by water electrolysis and is also the key reactant for CO2 methanation (Sabatier reaction). The utilization of CO2 as a feedstock for producing methane contributes to alleviate global climate changes and sequestration related problems. The produced methane is a carbon neutral gas that fits into existing infrastructure and allows issues related to the aforementioned intermittency and non-programmability of solar energy to be overcome. In this paper, an experimental apparatus, composed of an electrolyzer and a tubular fixed bed reactor, is built and used to produce methane via Sabatier reaction. The objective of the experimental campaign is the evaluation of the process performance and a comparison with other CO2 valorization paths such as methanol production. The investigated pressure range was 2–20 bar, obtaining a methane volume fraction in outlet gaseous mixture of 64.75% at 8 bar and 97.24% at 20 bar, with conversion efficiencies of, respectively, 84.64% and 99.06%. The methanol and methane processes were compared on the basis of an energy parameter defined as the spent energy/stored energy. It is higher for the methanol process (0.45), with respect to the methane production process (0.41–0.43), which has a higher energy storage capability
- …