Life cycle analysis of road construction and use

Both the construction and use of roads have a range of environmental impacts; therefore, it is important to assess the sources of their burdens to adopt correct mitigation policies. Life cycle analysis (LCA) is a useful method to obtain demonstrable, accurate and non-misleading information for decision-making experts. The study presents a "cradle to gate with options" LCA of a provincial road during 60 year-service life. Input data derive from the bill of quantity of the project and their impacts have been evaluated according to the European standard EN 15804. The study considers the impacts of the construction and maintenance stages, lighting, and use of the vehicles on the built road. The results obtained from a SimaPro model highlight that the almost half of impacts took place during the construction stage rather than the use stage. Therefore, the adoption of environmentally friendly road planning procedures, the use of low-impact procedures in the production of materials, and the use of secondary raw materials could have the largest potential for reducing environmental impacts

Taxonomy of Fusarium genus: A continuous fight between lumpers and splitters

The genus Fusarium comprises a high number of fungal species that can be plant-pathogenic, causing diseases in several agriculturally important crops including cereals, and also can be harmful for humans and animals since many of them are toxigenic. The identification of mycotoxigenic Fusarium species still remains a most critical issue, given that the number of species recognized in the genus has been constantly changing in the last century in accordance with the different taxonomic systems. Together with the morphological identification, current criteria for Fusarium species identification are also based on biological and phylogenetic species recognition. However these criteria rarely agree to each other. Therefore, it is still a charming scientific challenge to ascertain the taxonomic status of Fusarium species, which in the years have been continuously 'splitted' and 'lumpered' by scientists. The major cases of the taxonomic debates amongst the Fusarium community will be here discussed

Masonry wall panels retrofitted with thermal-insulating GFRP-reinforced jacketing

Today there is a need to provide thermally efficient walls, while at the same time to increase the mechanical properties of old unreinforced masonry walls that will not require large amounts of energy in the retrofitting or deconstruction processes. To address this problem, this paper gives the results of shear tests carried out on masonry panels made of solid bricks retrofitted with a new technique based on the use of glass fiber-reinforced polymers (GFRP) grids inserted into a thermal insulating jacketing. This was made of different low-strength lime-based mortars. Tests were carried out in laboratory and results were used for the determination of the shear modulus and strength of the wall panels before and after the application of the GFRP reinforcement. Retrofitted panels exhibited a significant enhancement in the lateral capacity when compared to the control panels. The thermal performance of the proposed mortars was also investigated both with and without GFRP. Low values of thermal conductivity were found, especially for the samples with GFRP; a reduction of the thermal transmittance value in the 34–45 % range was also obtained by applying 45 mm layer of coating in conventional masonry walls

Hip joint hydatidosis after prosthesis replacement

Summary Hydatidosis is a rare parasitic disease caused by the Echinococcus tapeworm, which only occasionally affects the musculoskeletal tissues. In this article we describe the case of a patient who underwent a total hip replacement procedure for a pathological fracture of the femur neck. At the next histological examination it was shown to be a consequence of secondary bone hydatidosis. This clinical case is exceptional in that the infection spread to the cotyloid and femoral prosthesis components and, in the following years, caused repeated episodes of joint dislocation

Cyclopentenyl ethylamines active on CNS

Two new cyclopentenylethylamines were prepared and were submitted to a pharmacological screening together with some others previously described and now reprepared. All compounds exhibited different degrees of depressive activity on CNS and good analgesic activity. Compound 5, bearing a phenyl group on the carbon atom to which the amino group is connected, appears rather interesting being the most active as analgesic and the least toxic. Compounds 2 and 3 are able to antagonize in a certain degree lethal doses of physostigmine and also, respectively, of pentylenetetrazole and strychnine

Periodic Preamble-Based Frequency Recovery in OFDM Receivers Plagued by I/Q Imbalance

The direct conversion receiver (DCR) architecture has received much attention in the last few years as an effective means to obtain user terminals with reduced cost, size, and power consumption. A major drawback of a DCR device is the possible insertion of I/Q imbalances in the demodulated signal, which can seriously degrade the performance of conventional synchronization algorithms. In this paper, we investigate the problem of carrier frequency offset (CFO) recovery in an OFDM receiver equipped with a DCR front-end. Our approach is based on maximum likelihood (ML) arguments and aims at jointly estimating the CFO, the useful signal component, and its mirror image. In doing so, we exploit knowledge of the pilot symbols transmitted within a conventional repeated training preamble appended in front of each data packet. Since the exact ML solution turns out to be too complex for practical purposes, we propose two alternative schemes which can provide nearly optimal performance with substantial computational saving. One of them provides the CFO in closed-form, thereby avoiding any grid-search procedure. The accuracy of the proposed methods is assessed in a scenario compliant with the 802.11a WLAN standard. Compared with existing solutions, the novel schemes achieve improved performance at the price of a tolerable increase of the processing load

Identification of toxigenic fungal species associated with maize ear rot: Calmodulin as single informative gene

Accurate identification of fungi occurring on agrofood products is the key aspect of any prevention and pest management program, offering valuable information in leading crop health and food safety. Fungal species misidentification can dramatically impact biodiversity assessment, ecological studies, management decisions, and, concerning toxigenic fungi, health risk assessment, since they can produce a wide range of toxic secondary metabolites, referred to as mycotoxins. Since each toxigenic fungal species can have its own mycotoxin profile, a correct species identification, hereby attempted with universal DNA barcoding approach, could have a key role in mycotoxins prevention strategies. Currently, identification of single marker for species resolution in fungi has not been achieved and the analysis of multiple genes is used, with the advantage of an accurate species identification and disadvantage of difficult setting up of PCR-based diagnostic assays. In the present paper, we describe our strategy to set up a DNA-based species identification of fungal species associated with maize ear rot, combining DNA barcoding approach and species-specific primers design for PCR based assays. We have (i) investigated the appropriate molecular marker for species identification, limited to mycobiota possibly occurring on maize, identifying calmodulin gene as single taxonomically informative entity; (ii) designed 17 sets of primers for rapid identification of 14 Fusarium, 10 Aspergillus, 2 Penicillium, and 2 Talaromyces species or species groups, and finally (iii) tested specificity of the 17 set of primers, in combination with 3 additional sets previously developed