55,036 research outputs found
The use of ion beam cleaning to obtain high quality cold welds with minimal deformation
A variation of cold welding is described which utilizes an ion beam to clean mating surfaces prior to joining in a vacuum environment. High quality solid state welds were produced with minimal deformation
Wave speeds in the corona and the dynamics of mass ejections
A disturbance or coronal mass ejection being advected by the solar wind will expand at the fastest local characteristic speed - typically approximately the fast-mode speed. To estimate this characteristic wave speed and the velocity field in the ambient corona, it is necessary to know the magnetic field, temperature, and density. Only the density is known from coronal observations. The temperature, magnetic field, and velocity are not yet directly measured in the outer corona and must be estimated from a model. In this study, it is estimated that the magnetic field, solar wind velocity, and characteristic speeds use the MHD model of coronal expansion between 1 and 5 solar radii (R solar radii) with a dipole magnetic field at the base. This model, for a field strength of about 2 gauss at the base, gives flow speeds at low latitudes (near the heliospheric current sheet) of 250 km/s at 5 R solar radii and, 50 km/s at 2 solar radii, and fast-mode speeds to 400 to 500 km/s everywhere between 2 and 5 solar radii. This suggests that the outer edge of a velocity of mass ejection reported by MacQueen and Fisher (1983) and implies that the acceleration mechanism for coronal mass ejections is other than simple entrainment in the solar wind
Creep behavior of niobium alloy PWC-11
The high vacuum creep and creep-rupture behavior of a Nb-1Zr-.1C alloy (PWC 11) was investigated at 1350 and 1400 K with an applied stress of 40 MPa. The material was tested in the following four conditions: annealed (1 hr 1755 K/2 hr 1475 K); annealed plus EB welded; annealed plus aged for 1000 hr at 1350 or 1400 K; and annealed, welded, and aged. It was found that the material in the annealed state was the most creep-resistant condition tested, and that aging the alloy for 1000 hr without an applied stress greatly reduced that strength; however, it was still approximately three times as creep resistant as Nb-1Zr. Additionally, the EB weld region was stronger than the base metal in each condition tested, and phase extraction of the dispersed precipitate revealed the presence of a 70%ZrC-30%NbC cubic monocarbide phase
The effect of electron beam welding on the creep rupture properties of a Nb-Zr-C alloy
Creep rupture tests of electron beam welded PWC-11 sheet were conducted at 1350 K. Full penetration, single pass welds were oriented transverse to the testing direction in 1 mm thick sheet. With this orientation, stress was imposed equally on the base metal, weld metal, and heat-affected zone. Tests were conducted in both the postweld annealed and aged conditions. Unwelded specimens with similar heat treatments were tested for comparative purposes. It was found that the weld region is stronger than the base metal for both the annealed and aged conditions and that the PWC-11 material is stronger in the annealed condition than in the aged condition
Quantitative Analysis of Electrotonic Structure and Membrane Properties of NMDA-Activated Lamprey Spinal Neurons
Parameter optimization methods were used to quantitatively analyze frequency-domain-voltage-clamp data of NMDA-activated lamprey spinal neurons simultaneously over a wide range of membrane potentials. A neuronal cable model was used to explicitly take into account receptors located on the dendritic trees. The driving point membrane admittance was measured from the cell soma in response to a Fourier synthesized point voltage clamp stimulus. The data were fitted to an equivalent cable model consisting of a single lumped soma compartment coupled resistively to a series of equal dendritic compartments. The model contains voltage-dependent NMDA sensitive (INMDA), slow potassium (IK), and leakage (IL) currents. Both the passive cable properties and the voltage dependence of ion channel kinetics were estimated, including the electrotonic structure of the cell, the steady-state gating characteristics, and the time constants for particular voltage- and time-dependent ionic conductances. An alternate kinetic formulation was developed that consisted of steady-state values for the gating parameters and their time constants at half-activation values as well as slopes of these parameters at half-activation. This procedure allowed independent restrictions on the magnitude and slope of both the steady-state gating variable and its associated time constant. Quantitative estimates of the voltage-dependent membrane ion conductances and their kinetic parameters were used to solve the nonlinear equations describing dynamic responses. The model accurately predicts current clamp responses and is consistent with experimentally measured TTX-resistant NMDA-induced patterned activity. In summary, an analysis method is developed that provides a pragmatic approach to quantitatively describe a nonlinear neuronal system
Scattering quantum random-walk search with errors
We analyze the realization of a quantum-walk search algorithm in a passive,
linear optical network. The specific model enables us to consider the effect of
realistic sources of noise and losses on the search efficiency. Photon loss
uniform in all directions is shown to lead to the rescaling of search time.
Deviation from directional uniformity leads to the enhancement of the search
efficiency compared to uniform loss with the same average. In certain cases
even increasing loss in some of the directions can improve search efficiency.
We show that while we approach the classical limit of the general search
algorithm by introducing random phase fluctuations, its utility for searching
is lost. Using numerical methods, we found that for static phase errors the
averaged search efficiency displays a damped oscillatory behaviour that
asymptotically tends to a non-zero value.Comment: 10 pages, 10 figures. Two figures added for clarity, also made
improvements to the tex
The Near-Infrared Extinction Law in Regions of High Av
We present a spectroscopic study of the shape of the dust-extinction law
between 1.0 and 2.2um towards a set of nine ultracompact HII regions with Av >
15 mag. We find some evidence that the reddening curve may tend to flatten at
higher extinctions, but just over half of the sample has extinction consistent
with or close to the average for the interstellar medium. There is no evidence
of extinction curves significantly steeper than the standard law, even where
water ice is present. Comparing the results to the predictions of a simple
extinction model, we suggest that a standard extinction law implies a robust
upper limit to the grain-size distribution at around 0.1 - 0.3um. Flatter
curves are most likely due to changes in this upper limit, although the effects
of flattening due to unresolved clumpy extinction cannot be ruled out.Comment: 9 pages, 7 figure
Non-Volatile Magnonic Logic Circuits Engineering
We propose a concept of magnetic logic circuits engineering, which takes an
advantage of magnetization as a computational state variable and exploits spin
waves for information transmission. The circuits consist of magneto-electric
cells connected via spin wave buses. We present the result of numerical
modeling showing the magneto-electric cell switching as a function of the
amplitude as well as the phase of the spin wave. The phase-dependent switching
makes it possible to engineer logic gates by exploiting spin wave buses as
passive logic elements providing a certain phase-shift to the propagating spin
waves. We present a library of logic gates consisting of magneto-electric cells
and spin wave buses providing 0 or p phase shifts. The utilization of phases in
addition to amplitudes is a powerful tool which let us construct logic circuits
with a fewer number of elements than required for CMOS technology. As an
example, we present the design of the magnonic Full Adder Circuit comprising
only 5 magneto-electric cells. The proposed concept may provide a route to more
functional wave-based logic circuitry with capabilities far beyond the limits
of the traditional transistor-based approach
The 2-D magnetohydrostatic configurations leading to flares or quiescent filament eruptions
To investigate the cause of flares and quiescent filament eruptions the quasi-static evolution of a magnetohydrostatic (MHS) model was studied. The results lead to a proposal that: the sudden disruption of an active-region filament field configuration and the accompanying flare result from the lack of a neighboring equilibrium state as magnetic shear is increased above the critical value; and a quiescent filament eruption is due to an ideal MHD kink instability of a highly twisted detached flux tube formed by the increase of plasma current flowing along the length of the filament. A numerical solution was developed for the 2-D MHS equation for the self-consistent equilibrium of a filament and overlying coronal magnetic field. Increase of the poloidal current causes increase of magnetic shear. As shear increases past a critical point, there is a discontinuous topological change in the equilibrium configuration. It was proposed that the lack of a neighboring equilibrium triggers a flare. Increase of the axial current results in a detached tube with enough helical twist to be unstable to ideal MHD kink modes. It was proposed that this is the condition for the eruption of a quiescent filament
- …