993 research outputs found
Al2O3/ZrO2/Y3Al5O12 composites. A high-temperature mechanical characterization
An Al2O3/5 vol%·ZrO2/5 vol%·Y3Al5O12 (YAG) tri-phase composite was manufactured by surface modification of an alumina powder with inorganic precursors of the second phases. The bulk materials were produced by die-pressing and pressureless sintering at 1500 °C, obtaining fully dense, homogenous samples, with ultra-fine ZrO2 and YAG grains dispersed in a sub-micronic alumina matrix. The high temperature mechanical properties were investigated by four-point bending tests up to 1500 °C, and the grain size stability was assessed by observing the microstructural evolution of the samples heat treated up to 1700 °C. Dynamic indentation measures were performed on as-sintered and heat-treated Al2O3/ZrO2/YAG samples in order to evaluate the micro-hardness and elastic modulus as a function of re-heating temperature. The high temperature bending tests highlighted a transition from brittle to plastic behavior comprised between 1350 and 1400 °C and a considerable flexural strength reduction at temperatures higher than 1400 °C; moreover, the microstructural investigations carried out on the re-heated samples showed a very limited grain growth up to 1650 °C
Advances in the field of Nanostructured Ceramic Composites
In recent years, the production of ceramic composites having nanosized features is receiving increasing attention, as they demonstrated enhanced mechanical and/or functional performances as respect to conventional micronic materials [...
On some amphicorina (polychaeta, sabellidae) species from the mediterranean coast, with the description of A. grahamensis
Species belonging to the genus Amphicorina are reported from some areas of the Mediterranean Sea, with the description of the new species A. grahamensis. The description of another species, Amphicorina sp., close to an Australian taxon, together with the redescriptions of A. pectinata, A. persinosa, and A. armandi are also given; the variability of this last taxon, probably deriving from misidentiflcations, is also considered. Examined specimens were prevalently from the Italian coast, and in particular from the Adriatic Sea. © 1999 Taylor & Francis Group, LLC
Alkali-activation of marble sludge: Influence of curing conditions and waste glass addition
The use of marble sludge as precursor for new alkali activated materials was assessed studying three different curing conditions (air, humid and water immersion, respectively), after an initial curing at 60 °C for 24 h, and two glass powder fractions additions (2.5 and 5.0 vol%). Microstructural, physical (drying shrinkage, Fourier transform-infrared (FT-IR) spectroscopy, X-ray spectroscopy (XPS)), thermal (differential thermal analysis – thermogravimetric analysis, DTA-TGA) and mechanical (flexural and compressive strength) properties were investigated. Air curing was the most favourable atmosphere for mechanical properties development because it promotes Si-O-Si polymerization and gel densification, as demonstrated by FT-IR and FE-SEM observations, respectively. Satisfactory mechanical properties were achieved (18 MPa and 45 MPa, for flexural and compressive strength, respectively) in particular for glass containing mixtures. Moreover, glass powder addition significantly reduced drying shrinkage of air-cured samples because it operated as a rigid aggregate in the matrix and strengthened the formed gel
On the dimension of subspaces with bounded Schmidt rank
We consider the question of how large a subspace of a given bipartite quantum
system can be when the subspace contains only highly entangled states. This is
motivated in part by results of Hayden et al., which show that in large d x
d--dimensional systems there exist random subspaces of dimension almost d^2,
all of whose states have entropy of entanglement at least log d - O(1). It is
also related to results due to Parthasarathy on the dimension of completely
entangled subspaces, which have connections with the construction of
unextendible product bases. Here we take as entanglement measure the Schmidt
rank, and determine, for every pair of local dimensions dA and dB, and every r,
the largest dimension of a subspace consisting only of entangled states of
Schmidt rank r or larger. This exact answer is a significant improvement on the
best bounds that can be obtained using random subspace techniques. We also
determine the converse: the largest dimension of a subspace with an upper bound
on the Schmidt rank. Finally, we discuss the question of subspaces containing
only states with Schmidt equal to r.Comment: 4 pages, REVTeX4 forma
Two-sided estimates of minimum-error distinguishability of mixed quantum states via generalized Holevo-Curlander bounds
We prove a concise factor-of-2 estimate for the failure rate of optimally
distinguishing an arbitrary ensemble of mixed quantum states, generalizing work
of Holevo [Theor. Probab. Appl. 23, 411 (1978)] and Curlander [Ph.D. Thesis,
MIT, 1979]. A modification to the minimal principle of Cocha and Poor
[Proceedings of the 6th International Conference on Quantum Communication,
Measurement, and Computing (Rinton, Princeton, NJ, 2003)] is used to derive a
suboptimal measurement which has an error rate within a factor of 2 of the
optimal by construction. This measurement is quadratically weighted and has
appeared as the first iterate of a sequence of measurements proposed by Jezek
et al. [Phys. Rev. A 65, 060301 (2002)]. Unlike the so-called pretty good
measurement, it coincides with Holevo's asymptotically optimal measurement in
the case of nonequiprobable pure states. A quadratically weighted version of
the measurement bound by Barnum and Knill [J. Math. Phys. 43, 2097 (2002)] is
proven. Bounds on the distinguishability of syndromes in the sense of
Schumacher and Westmoreland [Phys. Rev. A 56, 131 (1997)] appear as a
corollary. An appendix relates our bounds to the trace-Jensen inequality.Comment: It was not realized at the time of publication that the lower bound
of Theorem 10 has a simple generalization using matrix monotonicity (See [J.
Math. Phys. 50, 062102]). Furthermore, this generalization is a trivial
variation of a previously-obtained bound of Ogawa and Nagaoka [IEEE Trans.
Inf. Theory 45, 2486-2489 (1999)], which had been overlooked by the autho
Computable species descriptions and nanopublications: applying ontology-based technologies to dung beetles (Coleoptera, Scarabaeinae)
Taxonomy has long struggled with analysing vast amounts of phenotypic data due to computational and accessibility challenges. Ontology-based technologies provide a framework for modelling semantic phenotypes that are understandable by computers and compliant with FAIR principles. In this paper, we explore the use of Phenoscript, an emerging language designed for creating semantic phenotypes, to produce computable species descriptions. Our case study centers on the application of this approach to dung beetles (Coleoptera, Scarabaeinae)
Distance sampling effectively monitored a declining population of Italian roe deer Capreolus capreolus italicus
n/
Digital light processing stereolithography of zirconia ceramics: Slurry elaboration and orientation-reliant mechanical properties
Digital Light Processing (DLP) is a promising technique for the preparation of ceramic parts with complex shapes and high accuracy. In this study, 3 mol% yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) UV-curable slurries were prepared and printed via DLP. Two different solid loadings (40.5 and 43.6 vol%, respectively) and printing directions were investigated to assess the influence of these parameters on physical and mechanical properties of the sintered parts. Zirconia samples were sintered at 1550 °C for 1 h, achieving a very high relative density (99.2%TD), regardless of solid loading and printing direction. FE-SEM micrographs shown a homogeneous and defect-free cross section with an average grains size of 0.56 ± 0.19 µm. Finally, mechanical properties were influenced by printing direction and zirconia vol%. Indeed, the composition with the higher solid loading (i.e. 43.6 vol%) had the highest three-point flexural strength (751 ± 83 MPa) when tested perpendicular to the printing plane
- …