HORIZONTAL TWO-PHASE FLOW PATTERN RECOGNITION

In the present work a Wire Mesh Sensor (WMS) has been adopted to characterize the air-water two-phase flow in a test section consisting of a horizontal Plexiglas pipe of internal diameter 19.5 mm and total length of about 6 m. The flow quality ranges from 0 to 0.73 and the superficial velocity ranges from 0.145 to 31.94 m/s for air and from 0.019 to 2.62 m/s for water. The observed flow patterns are stratified-bubble-slug/plug-annular. The WMS consists of two planes of parallel wire grids (16x16) that are placed across the channel at 1.5 mm and span over the measuring cross section. The wires of both planes cross under an angle of 90°, with a diameter Dwire of 70 μm and a pitch equal to 1.3 mm. The void fraction profiles are derived from the sensor data and their evolution in time and space is analyzed and discussed. The dependence of the signals on the measured fluid dynamic quantities is discussed too. The main task is to predict which flow pattern will exist under any set of operating conditions as well as to predict the value of characteristic flow parameters

Tracing groundwater salinization processes in coastal aquifers: a hydrogeochemical and isotopic approach in Na-Cl brackish waters of north-western Sardinia, Italy

Abstract. Throughout the Mediterranean, salinization threatens water quality, especially in coastal areas. This salinization is the result of concomitant processes related to both seawater intrusion and water–rock interaction, which in some cases are virtually indistinguishable. In the Nurra region of northwestern Sardinia, recent salinization related to marine water intrusion has been caused by aquifer exploitation. However, the geology of this region records a long history from the Palaeozoic to the Quaternary, and is structurally complex and comprises a wide variety of lithologies, including Triassic evaporites. Determining the origin of the saline component of the Jurassic and Triassic aquifers in the Nurra region may provide a useful and more general model for salinization processes in the Mediterranean area, where the occurrence of evaporitic rocks in coastal aquifers is a common feature. In addition, due to intensive human activity and recent climatic change, the Nurra has become vulnerable to desertification and, in common with other Mediterranean islands, surface water resources periodically suffer from severe shortages. With this in mind, we report new data regarding brackish and surface waters (outcrop and lake samples) of the Na-Cl type from the Nurra region, including major ions and selected trace elements (B, Br, I, and Sr), in addition to isotopic data including δ18O, δD in water, and δ34S and δ18O in dissolved SO4. To identify the origin of the salinity more precisely, we also analysed the mineralogical and isotopic composition of Triassic evaporites. The brackish waters have Cl contents of up to 2025 mg L−1 , and the ratios between dissolved ions and Cl, with the exception of the Br / Cl ratio, are not those expected on the basis of simple mixing between rainwater and seawater. The δ18O and δD data indicate that most of the waters fall between the regional meteoric water line and the global meteoric water line, supporting the conclusion that they are meteoric in origin. A significant consequence of the meteoric origin of the Na-Cl-type water studied here is that the Br / Cl ratio, extensively used to assess the origin of salinity in fresh water, should be used with care in carbonate aquifers that are near the coast. Overall, δ34S and δ18O levels in dissolved SO4 suggest that water–rock interaction is responsible for the Na-Cl brackish composition of the water hosted by the Jurassic and Triassic aquifers of the Nurra, and this is consistent with the geology and lithological features of the study area. Evaporite dissolution may also explain the high Cl content, as halite was detected within the gypsum deposits. Finally, these Na-Cl brackish waters are undersaturated with respect to the more soluble salts, implying that in a climate evolving toward semi-arid conditions, the salinization process could intensify dramatically in the near future

Two-Phase flow instrumentation for nuclear accidents simulation, Keynote lecture KN3, pp. 1-23, Procs. 32nd UIT Heat Transfer Conference, Pisa, June 23-25, 2014.

The paper presents the research work performed at the Energy Department of the Politecnico di Torino, concerning the development of two-phase flow instrumentation and of models, based on the analysis of experimental data, that are able to interpret the measurement signals. The study has been performed with particular reference to the design of power plants, such as nuclear water reactors, where the two-phase flow thermal fluid dynamics must be accurately modeled and predicted. In two-phase flow typically a set of different measurement instruments (Spool Piece - SP) must be installed in order to evaluate the mass flow rate of the phases in a large range of flow conditions (flow patterns, pressures and temperatures); moreover, an interpretative model of the SP need to be developed and experimentally verified. The investigated meters are: Turbine, Venturi, Impedance Probes, Concave sensors, Wire mesh sensor, Electrical Capacitance Probe. Different instrument combinations have been tested, and the performance of each one has been analyzed

Static and Dynamical Susceptibility of LaO1-xFxFeAs

The mechanism of superconductivity and magnetism and their possible interplay have recently been under debate in pnictides. A likely pairing mechanism includes an important role of spin fluctuations and can be expressed in terms of the magnetic susceptibility chi. The latter is therefore a key quantity in the determination of both the magnetic properties of the system in the normal state, and of the contribution of spin fluctuations to the pairing potential. A basic ingredient to obtain chi is the independent-electron susceptibility chi0. Using LaO1-xFxFeAs as a prototype material, in this report we present a detailed ab-initio study of chi0(q,omega), as a function of doping and of the internal atomic positions. The resulting static chi0(q,0) is consistent with both the observed M-point related magnetic stripe phase in the parent compound, and with the existence of incommensurate magnetic structures predicted by ab-initio calculations upon doping.Comment: 15 pages, 8 figure

Seminal fluid metabolomic markers of oligozoospermic infertility in humans

Infertility affects 12–15% of couples worldwide, and male factors are the cause of nearly half of all cases. Studying seminal fluid composition could lead to additional diagnostic accuracy and a better understanding of the pathophysiology of male factor infertility. Metabolomics offers a new opportunity to evaluate biomarkers and better understand pathological mechanisms. The aim of the study was to identify new markers or therapeutic targets to improve outcomes in male factor or idiopathic infertility patients. Semen samples were obtained from 29 men with a normal spermogram test, and from 18 oligozoospermic men. Samples were processed and analyzed by Nuclear Magnetic Resonance spectroscopy and, subsequently, multivariate and univariate statistical analyses. Receiving Operator Curves (ROC) and Spearman correlations were also performed. An Orthogonal Partial Least Square Discriminant Analysis supervised multivariate model was devised to compare the groups. The levels of fructose, myo‐inositol, aspartate and choline were altered. Moreover, Spearman Correlation associated fructose, aspartate and myo‐inositol with the total amount of spermatozoa, total motile spermatozoa, % of immotility and % of “in situ” spermatozoic motility respectively. NMR‐based metabolomics allowed the identification of a specific metabolic fingerprint of the seminal fluids of patients affected by oligozoospermia

Exactly solvable models in 2D semiclassical dilaton gravity and extremal black holes

Previously known exactly solvable models of 2D semiclassical dilaton gravity admit, in the general case, only non-extreme black holes. It is shown that there exist exceptional degenerate cases, that can be obtained by some limiting transitions from the general exact solution, which include, in particular, extremal and ultraextremal black holes. We also analyze properties of extreme black holes without demanding exact solvability and show that for such solutions quantum backreaction forbids the existence of ultraextreme black holes. The conditions,under which divergencies of quantum stresses in a free falling frame can disappear, are found. We derive the closed equation with respect to the metric as a function of the dilaton field that enables one, choosing the form of the metric, to restore corresponding Lagrangian. It is demonstrated that exactly solvable models, found earlier, can be extended to include an electric charge only in two cases: either the dilaton-gravitation coupling is proportional to the potential term, or the latter vanishes. The second case leads to the effective potential with a negative amplitude and we analyze, how this fact affects the structure of spacetime. We also discuss the role of quantum backreaction in the relationship between extremal horizons and the branch of solutions with a constant dilaton.Comment: 31 pages. In v.2 typo in Ref. [2] corrected, 4 references added. Accepted in Class. Quant. Gra

Phononic Self energy effects and superconductivity in CaC6_6

We study the graphite intercalated compound CaC$_6$ by means of Eliashberg theory, focusing on the anisotropy properties. An analysis of the electron-phonon coupling is performed, and we define a minimal 6-band anisotropy structure. Comparing with Superconducting Density Functional Theory (SCDFT) the condition under which Eliashberg theory is able to reproduce the SCDFT gap structure is determined, and we discuss the role of Coulomb interactions. The Engelsberg-Schrieffer polaron structure is computed by solving the Eliashberg equation on the Matsubara axis and analytically continuing it to the full complex plane. This reveals the polaronic quasiparticle bands anisotropic features as well as the interplay with superconductivity

a new spool piece for horizontal two phase flow measurement

This works presents the characterization of a Spool Piece (SP), made up of a Classical Venturi and a Wire Mesh Sensor (WMS), that are installed in a horizontal test section, in which an air-water mixture flows. The test section consists of a horizontal Plexiglas pipe of internal diameter 19.5 mm and total length of about 7 m. The flow quality ranges from 0 to 0.73 and the superficial velocity ranges from 0.14 to 32 m/s for air and from 0.019 to 2.62 m/s for water; the pressure ranges from atmospheric pressure to 4 bar depending on the experimental conditions. The observed flow patterns are stratified-bubbly-slug/plug-annular. The instruments response is analyzed and discussed. From the signal analysis the mass flow rate of each phase is obtained. The developed model allows the evaluation of the mass flow rate with an accuracy higher than 20% in the 84% of the cases and with an accuracy higher than 10% in the 73.3% of the cases. Finally the introduction of the estimated parameters in the SP model is considered and discussed