Parents’ Acceptance to Alveolar and Nasoalveolar Molding Appliances during Early Cleft Lip and Palate Care: A Call for High-Quality Research

AIM: Acceptance and compliance of the parents are an essential pillar in the success of pre-surgical infant orthopedic (PSIO) treatment. The aim of this systematic review is to evaluate the burden of care associated with the alveolar molding (AM) and nasoalveolar molding (NAM) appliances as experienced by the parents with unilateral complete cleft lip and palate (UCLP) infants. METHODS: An electronic search was carried on by two reviewers in eight search engines, as well as a manual search till July 2019. Randomized controlled trials (RCTs) comparing AM/NAM appliances to controls in infants with UCLP were selected. Risk of bias was evaluated using Cochrane risk of bias assessment tool for RCTs. RESULTS: One RCT was included in the qualitative analysis. Non-significant differences were found in the amount of mothers’ satisfaction between the intervention and control groups. CONCLUSIONS: Insufficient low-quality evidence is available regarding the effects of AM and NAM on parents’ satisfaction and burden of care. No conclusions can be withdrawn from the existing studies. High-quality research is needed to elucidate the degree of parents’ acceptance to the molding appliances. PROSPERO registration number: CRD42016043174

Effects of Different Parameters of Diode Laser on Acceleration of Orthodontic Tooth Movement and Its Effect on Relapse: An Experimental Animal Study

AIM: Recent studies have demonstrated that low-level laser therapy (LLLT) can accelerate orthodontic tooth movement. However, there is still controversy about the optimum parameters that can cause acceleration. The present study was designed to examine two different doses of LLLT in the acceleration of orthodontic tooth movement and their effect on relapse. METHODS: An orthodontic appliance was designed to induce tooth movement on lower incisors of rabbits. The in-al-as diode laser was used to radiate different groups of rabbits according to a specific protocol. The amount of tooth movement was measured for 21 days, and then the orthodontic appliance was removed, and the relapse was measured till day 28. RESULTS: The amount of tooth movement was significantly greater in the group with irradiation of low dose in comparison with the high dose group and the control group. The relapse was greatest in the group of low dose irradiation and least in the control group. CONCLUSION: The findings suggest that LLLT with a low dose accelerate the orthodontic tooth movement while LLLT with a high dose was not able to have the same effect. LLLT had a reverse effect on relapse tendency; an increase in the relapse tendency was seen with low dose irradiation

Burnout among surgeons before and during the SARS-CoV-2 pandemic: an international survey

Background: SARS-CoV-2 pandemic has had many significant impacts within the surgical realm, and surgeons have been obligated to reconsider almost every aspect of daily clinical practice. Methods: This is a cross-sectional study reported in compliance with the CHERRIES guidelines and conducted through an online platform from June 14th to July 15th, 2020. The primary outcome was the burden of burnout during the pandemic indicated by the validated Shirom-Melamed Burnout Measure. Results: Nine hundred fifty-four surgeons completed the survey. The median length of practice was 10 years; 78.2% included were male with a median age of 37 years old, 39.5% were consultants, 68.9% were general surgeons, and 55.7% were affiliated with an academic institution. Overall, there was a significant increase in the mean burnout score during the pandemic; longer years of practice and older age were significantly associated with less burnout. There were significant reductions in the median number of outpatient visits, operated cases, on-call hours, emergency visits, and research work, so, 48.2% of respondents felt that the training resources were insufficient. The majority (81.3%) of respondents reported that their hospitals were included in the management of COVID-19, 66.5% felt their roles had been minimized; 41% were asked to assist in non-surgical medical practices, and 37.6% of respondents were included in COVID-19 management. Conclusions: There was a significant burnout among trainees. Almost all aspects of clinical and research activities were affected with a significant reduction in the volume of research, outpatient clinic visits, surgical procedures, on-call hours, and emergency cases hindering the training. Trial registration: The study was registered on clicaltrials.gov "NCT04433286" on 16/06/2020

Dimensional and positional temporomandibular joint osseous characteristics in normodivergent facial patterns with and without temporomandibular disorders

Objective: This study evaluated the dimensional and positional osseous temporomandibular joint features in normodivergent facial patterns with and without temporomandibular disorders. Methods: A total of 165 adult patients were divided into two groups: group 1 (n = 79 patients; 158 joints): temporomandibular disorders patients and group 2 (n = 86 patients; 172 joints): non-temporomandibular disorders patients. Three-dimensional positional and dimensional temporomandibular joint characteristics, including glenoid fossa, mandibular condyles, and joint spaces, were assessed by cone beam computed tomography. Results: The glenoid fossa positions in the three orthogonal planes and height showed statistical significance between the two studied groups. The temporomandibular disorders patients showed higher horizontal and vertical condyle inclinations while anteroposterior inclination was less, and the condyle was positioned more superior, anterior, and lateral in the glenoid fossa. The condyle width and length showed no significance between the two groups, while condyle height was smaller in temporomandibular disorders patients. Anterior and medial joint spaces increased while the superior and posterior joint spaces reduced in temporomandibular disorders patients. Conclusion: There were significant differences between the patients with and without temporomandibular joint disorders in terms of mandibular fossa positions and height as well as condylar positions and inclinations in horizontal and vertical planes together with reduced condylar height and reduced posterior and superior joint spaces in the temporomandibular disorders patients. Clinical relevance: The temporomandibular disorder is a multifactorial disorder in which one of these factors is the dimensional and positional characteristics of the temporomandibular joints; including or excluding this factor requires a comprehensive three-dimensional investigation of patients with TMD compared to the normal group under the condition that the facial pattern is average as a confounding factor.Scopu

Supplemental Material, DS2_CPCJ_10.1177_1055665618788421 - Effectiveness of Gingivoperiosteoplasty on Alveolar Bone Reconstruction and Facial Growth in Patients With Cleft Lip and Palate: A Systematic Review and Meta-Analysis

<p>Supplemental Material, DS2_CPCJ_10.1177_1055665618788421 for Effectiveness of Gingivoperiosteoplasty on Alveolar Bone Reconstruction and Facial Growth in Patients With Cleft Lip and Palate: A Systematic Review and Meta-Analysis by Noha A. El-Ashmawi, Sherif A. ElKordy, Mona M. Salah Fayed, Amr El-Beialy, and Khaled H. Attia in The Cleft Palate-Craniofacial Journal</p

Supplemental Material, DS1_CPCJ_10.1177_1055665618788421 - Effectiveness of Gingivoperiosteoplasty on Alveolar Bone Reconstruction and Facial Growth in Patients With Cleft Lip and Palate: A Systematic Review and Meta-Analysis

<p>Supplemental Material, DS1_CPCJ_10.1177_1055665618788421 for Effectiveness of Gingivoperiosteoplasty on Alveolar Bone Reconstruction and Facial Growth in Patients With Cleft Lip and Palate: A Systematic Review and Meta-Analysis by Noha A. El-Ashmawi, Sherif A. ElKordy, Mona M. Salah Fayed, Amr El-Beialy, and Khaled H. Attia in The Cleft Palate-Craniofacial Journal</p

Optimal sites for orthodontic mini-implant placement assessed by cone beam computed tomography

OBJECTIVES: To determine (1) the optimal sites for mini-implant placement in the maxilla and the mandible based on dimensional mapping of the interradicular spaces and cortical bone thickness and (2) The effect of age and sex on the studied anatomic measurements. MATERIAL AND METHODS: The cone beam computed tomography images of 100 patients (46 males, 54 females) divided into two age groups (13-18 years), and (19-27 years) were used. The following interradicular measurements were performed: (1) Buccolingual bone thickness; (2) Mesiodistal spaces both buccally and palatally/lingually; and (3) Buccal and palatal/lingual cortical thicknesses. RESULTS: In the maxilla, the highest buccolingual thickness existed between first and second molars; the highest mesiodistal buccal/palatal distances were between the second premolar and the first molar. The highest buccal cortical thickness was between the first and second premolars. The highest palatal cortical thickness was between central and lateral incisors. In the mandible, the highest buccolingual and buccal cortical thicknesses were between the first and second molars. The highest mesiodistal buccal distance was between the second premolar and the first molar. The highest mesiodistal lingual distance was between the first and second premolars. The highest lingual cortical thickness was between the canine and the first premolar. The males and the older age group had significantly higher buccolingual, buccal, and palatal cortical thicknesses at specific sites and levels in the maxilla and the mandible. CONCLUSIONS: A clinical guideline for optimal sites for mini-implant placement is suggested. Sex and age affected the anatomic measurements in certain areas in the maxilla and the mandible