85 research outputs found
A correlative model to predict in vivo AUC for nanosystem drug delivery with release rate-limited absorption
Purpose. Drug release from nanosystems at the sites of either absorption or effect biophase is a major determinant of its biological action. Thus, in vitro drug release is of paramount importance in gaining insight for the systems performance in vivo. Methods. A novel in vitro in vivo correlation, IVIVC, model denoted as double reciprocal area method was presented and applied to 19 drugs from 55 nano formulations with total 336 data, gathered from literature. Results. The proposed model correlated the in vitro with in vivo parameters with overall error of 12.4 ± 3.9%. Also the trained version of the model predicted the test formulations with overall error of 15.8 ± 3.7% indicating the suitability of the approach. A theoretical justification was provided for the model considering the unified classical release laws. Conclusion. The model does not necessitate bolus intravenous drug data and seems to be suitable for IVIVC of drugs with release rate-limited absorption
Morphological and Physicochemical Evaluation of Modafinil-Eudragit RS100 Nanoformulations Prepared by Electrospray Method
Introduction: Modafinil is a wake-promoting agent approved by FDA for the treatment of narcolepsy and shift work sleep disorder. Due to its insolubility in water, the drug exhibits low oral bioavailability. Studies have shown that formulating poorly-soluble drugs as nanoparticles can improve the drugs physicochemical properties. Electrospraying is an uncomplicated and cost-benefit method for preparing nanoparticles that can easily be scaled up.
Methods and Results: Modafinil and Eudragit RS100 were co-dissolved in methanol and acetone (1:1) with the drug: polymer ratios of 1:5 and 1:10 at various total solution concentrations (10%, 15% and 20%). The solutions were injected through a capillary tube on a Teflon screen at a rate of 2 ml/h. A voltage of 20-25 kV was applied between the injection needle and the Teflon screen. The particle size and morphology of resultant nanoparticles and nanofibers were evaluated via scanning electron microspore (SEM). Thermal behavior and crystallinity of the samples were studied by differential scanning calorimeter (DSC) and Powder X-ray diffraction (PXRD). Fourier transform infrared spectroscopy (FTIR) was used to determine any possible interaction between the drug and the polymer. In vitro drug release profile was studied at a pH of 6.8 via USP apparatus II.
SEM results suggested that solutions with lower concentration created nanoparticles (100-300 nm) while increasing the concentration resulted in formation of nanofibers (50-100 nm). DSC and PXRD analysis revealed that electrosprayed Modafinil was transferred from crystalline to amorphous state. FTIR results indicated that hydrogen bonds might have formed between the drug and polymer. Drug release profile revealed that electrospraying process modified drug release pattern. Some of the formulations managed to increase the release rate whereas other formulations resulted in slower release.
Conclusions: Electrospraying is a suitable method for fabricating nanofibers and nanoparticles of Modafinil. The resultant nanoformulations show properties such as reduced size, decreased crystallinity and modified release rate, thus help Modafinil to have higher oral bioavailability
Preparation of Gliclazide Nanoparticles via Electrospraying Method and Evaluation of Their Physicochemical Properties
Introduction:
Gliclazide is a second-generation sulfonylurea used in the treatment of non-insulin dependent diabetes mellitus. Gliclazide is practically insoluble in water, therefore, researchers try to find techniques to improve its physicochemical properties. On the other hand, researches has shown that nanoparticles are effective in improving the physicochemical characteristics of poorly water-soluble drugs. There are many methods to prepare nanoparticles, among all, electrospraying as a one-step and cost-benefit technique can be easily applied in industrial scale.
Methods and Results:
Gliclazide and polymer (Eudragit RS100 or PEG6000) were co-dissolved in acetone with drug: polymer ratios of 1:5 and 1:10, so that the polymer solution concentrations were 10, 15 and 20% (w/v). Then these solutions were electosprayed. The particle size and morphology were evaluated using scanning electron microscopy (SEM). The physicochemical characteristics of nanofibers and nanoparticles were evaluated by DSC thermograms, FTIR spectroscopy and X-Ray crystallography. Drug release profiles were studied as well. The size of prepared nanofibers and nanobeads, ranged from 100 nm-500 nm. Based on the physicochemical characteristics, there was a transition from crystalline to amorphous state of Gliclazide. No interaction between drug and polymers were observed in the prepared nanoparticles. In vitro drug release studies revealed that the drug-release patterns were improved in the prepared nanoparticles.
Conclusions:
Electrospraying is a simple and low-cost method that can be used to produce Gliclazide nanoparticles in industrial scale and improve physicochemical properties of the drug
Kinetic analysis of drug release from nanoparticles
PURPOSE. Comparative drug release kinetics from nanoparticles was carried out using conventional and our novel models with the aim of finding a general model applicable to multi mechanistic release. Theoretical justification for the two best general models was also provided for the first time. METHODS. Ten conventional models and three models developed in our laboratory were applied to release data of 32 drugs from 106 nanoparticle formulations collected from literature. The accuracy of the models was assessed employing mean percent error (E) of each data set, overall mean percent error (OE) and number of Es less than 10 percent. RESULTS. Among the models the novel reciprocal powered time (RPT), Weibull (W) and log-probability (LP) ones produced OE values of 6.47, 6.39 and 6.77, respectively. The OEs of other models were higher than 10%. Also the number of errors less than 10% for the models was 84.9, 80.2 and 78.3 percents of total number of data sets. CONCLUSIONS. Considering the accuracy criteria the reciprocal powered time model could be suggested as a general model for analysis of multi mechanistic drug release from nanoparticles. Also W and LP models were the closest to the suggested model RPT
Studies on Dissolution Enhancement of Prednisolone, a Poorly Water-Soluble Drug by Solid Dispersion Technique
Introduction: Prednisolone is a class II substance according to the Biopharmaceutics Classification System. It is a poorly water soluble agent. The aim of the present study was to improve dissolution rate of a poorly water-soluble drug, prednisolone, by a solid dispersion technique. Methods: Solid dispersion of prednisolone was prepared with PEG 6000 or different carbohydrates such as lactose and dextrin with various ratios of the drug to carrier i.e., 1:10, 1:20 and 1:40. Solid dispersions were prepared by coevaporation method. The evaluation of the properties of the dispersions was performed using dissolution studies, Fourier-transform infrared spectroscopy and x-ray powder diffractometery. Results: The results indicated that lactose is suitable carriers to enhance the in vitro dissolution rate of prednisolone. The data from the x-ray diffraction showed that the drug was still detectable in its solid state in all solid dispersions except solid dispersions prepared by dextrin as carrier. The results from infrared spectroscopy showed no well-defined drug–carrier interactions for coevaporates. Conclusion: Solid dispersion of a poorly water-soluble drug, prednisolone may alleviate the problems of delayed and inconsistent rate of dissolution of the drug
Recent advances in improving oral drug bioavailability by cocrystals
Introduction: Oral drug delivery is the most favored route of drug administration. However, poor oral bioavailability is one of the leading reasons for insufficient clinical efficacy. Improving oral absorption of drugs with low water solubility and/or low intestinal membrane permeability is an active field of research. Cocrystallization of drugs with appropriate coformers is a promising approach for enhancing oral bioavailability. Methods: In the present review, we have focused on recent advances that have been made in improving oral absorption through cocrystallization. The covered areas include supersaturation and its importance on oral absorption of cocrystals, permeability of cocrystals through membranes, drug-coformer pharmacokinetic (PK) interactions, conducting in vivo-in vitro correlations for cocrystals. Additionally, a discussion has been made on the integration of nanocrystal technology with supramolecular design. Marketed cocrystal products and PK studies in human subjects are also reported. Results: Considering supersaturation and consequent precipitation properties is necessary when evaluating dissolution and bioavailability of cocrystals. Appropriate excipients should be included to control precipitation kinetics and to capture solubility advantage of cocrystals. Beside to solubility, cocrystals may modify membrane permeability of drugs. Therefore, cocrystals can find applications in improving oral bioavailability of poorly permeable drugs. It has been shown that cocrystals may interrupt cellular integrity of cellular monolayers which can raise toxicity concerns. Some of coformers may interact with intestinal absorption of drugs through changing intestinal blood flow, metabolism and inhibiting efflux pumps. Therefore, caution should be taken into account when conducting bioavailability studies. Nanosized cocrystals have shown a high potential towards improving absorption of poorly soluble drugs. Conclusions: Cocrystals have found their way from the proof-of-principle stage to the clinic. Up to now, at least two cocrystal products have gained approval from regulatory bodies. However, there are remaining challenges on safety, predicting in vivo behavior and revealing real potential of cocrystals in the human
Nanovaccine for leishmaniasis: preparation of chitosan nanoparticles containing Leishmania superoxide dismutase and evaluation of its immunogenicity in BALB/c mice
The effect of chamomile intake on lipid profile in patients with diabetes and related metabolic disorders. A systematic review and meta-analysis of randomized controlled trials
Development and characterization of solid dispersion of piroxicam for improvement of dissolution rate using hydrophilic carriers
Introduction: The main objective of this study was preparation and characterization of solid dispersion of piroxicam to enhance its dissolution rate. Methods: Solid dispersion formulations with different carriers including crospovidone, microcrystalline cellulose and Elaeagnus angustifolia fruit powder and with different drug: carrier ratios were prepared employing cogrinding method. Dissolution study of the piroxicam powders, physical mixtures and solid dispersions was performed in simulated gastric fluid and simulated intestinal fluid using USP Apparatus type II. The physical characterization of formulations were analyzed using powder X ray diffraction (PXRD), particle size analyzer and differential scanning calorimetry (DSC). Interactions between the drug and carriers were evaluated by Fourier transform infrared (FT-IR) spectroscopic method. Results: It was revealed that all of three carriers increase the dissolution rate of piroxicam from physical mixtures and especially in solid dispersions compared to piroxicam pure and treated powders. PXRD and DSC results were confirmed the reduction of crystalline form of piroxicam. FT-IR analysis did not show any physicochemical interaction between drug and carriers in the solid dispersion formulations. Conclusion: Dissolution rate was dependent on the type and ratio of drug: carrier as well as pH of dissolution medium. Dissolution data of formulations were fitted well in to the linear Weibull as well as non-linear logistic and a suggested models
Electrosprayed Nanoparticles Containing Hydroalcoholic Extract of Echinacea purpurea (L.) Moench Stimulates Immune System by Increasing Inflammatory Factors in Male Wistar Rats
Purpose: Echinacea purpurea (L.) Moench is a member of the Asteraceae family and is traditionally used mainly due to its immunostimulatory properties. Various compounds including alkylamides and chicoric acid were reported as active ingredients of E. purpurea. Here, we aimed to prepare electrosprayed nanoparticles (NPs) containing hydroalcoholic extract of E. purpurea using Eudragit RS100 (EP-Eudragit RS100 NPs) to improve the immunomodulatory effects of the extract. Methods: The EP-Eudragit RS100 NPs with the different extract:polymer ratios and solution concentrations were prepared using the electrospray technique. The size and morphology of the NPs were evaluated using dynamic light scattering (DLS) and field emission-scanning electron microscopy (FE-SEM). To evaluate the immune responses, male Wistar rats were administrated with the prepared EP-Eudragit RS100 NPs and plain extract in the final dose of 30 or 100 mg/kg. The blood samples of the animals were collected and the inflammatory factors and complete blood count (CBC) were investigated. Results: In vivo studies indicated that the plain extract and EP-Eudragit RS100 NPs (100 mg/kg) significantly increased the serum level of tumor necrosis factor-α (TNF-α) and interleukin 1-β (IL1-β) whereas the EP-Eudragit RS100 NPs (30 mg/kg) significantly increased the number of white blood cells (WBCs) compared to the control group. Lymphocytes’ count in all groups was increased significantly compared to the control group (P<0.05) whereas other CBC parameters remained unchanged. Conclusion: The prepared EP-Eudragit RS100 NPs by electrospray technique caused significant reinforcement in the immunostimulatory effects of the extract of E. purpurea
- …