Evaluation of a new chemiluminescence immunoassay for diagnosis of syphilis

<p>Abstract</p> <p>Objective</p> <p>To assess the sensitivity, specificity, and feasibility of a new chemiluminescence immunoassay (CLIA) in the diagnosis of syphilis.</p> <p>Methods</p> <p>At first, a retrospective study was conducted, using 135 documented cases of syphilis and 30 potentially interfering samples and 80 normal sera. A prospective study was also performed by testing 2, 071 unselected samples for routine screening for syphilis. CLIA was compared with a nontreponemal test (TRUST) and a treponemal test (TPPA).</p> <p>Results</p> <p>There was an agreement of 100% between CLIA and TPPA in the respective study. The percentage of agreement among the 245 sera tested was 100.0%. Compared with TPPA, the specificity of CLIA was 99.9% (1817/1819), the sensitivity of CLIA was 100.0% (244/244) in the prospective study. CLIA showed 99.5% agreement with TPPA by testing 2, 071 unselected samples. And CLIA seemed to be more sensitive than TPPA in detecting the samples of primary syphilis.</p> <p>Conclusions</p> <p>CLIA is easy to perform and the indicator results are objective and unequivocal. It may be suitable for large-scale screening as a treponemal test substituted for TPPA.</p

Upper Gastrointestinal Endoscopy Detection of Synchronous Multiple Primary Cancers in Esophagus and Stomach: Single Center Experience from China

The present study was undertaken to clarify the prevalence and clinicopathological features of synchronous multiple primary cancers (SMPCs) under upper gastrointestinal endoscopic examination. We enrolled 45,032 consecutive patients who underwent upper gastrointestinal endoscopic examination for digestive disease from January 2006 to December 2007 in our hospital and analyzed the clinicopathological features of SMPCs in esophagus and stomach. SMPCs are defined as two or over two different cancerous lesions developing in the same or other organs within 6 months. SMPCs were identified in 46 patients (0.1%). The gender ratio was 5.6 : 1 (male/female) and the mean age was 59.4 years. Synchronous esophageal and gastric cancers were the most frequent, being seen in 32 patients (0.07%). The most common histological types of SMPCs were squamous cell carcinoma in esophagus and adenocarcinoma in stomach, respectively. There were 27 (59%) SMPCs patients who had the history of simultaneous exposure to tobacco smoking and alcohol drinking. Additionally, 32 (78%) esophageal squamous cell cancers were associated with tobacco use. And 23 adenocarcinomas of the stomach were associated with Helicobacter pylori infection

Perovskite-polymer composite cross-linker approach for highly-stable and efficient perovskite solar cells.

Manipulation of grain boundaries in polycrystalline perovskite is an essential consideration for both the optoelectronic properties and environmental stability of solar cells as the solution-processing of perovskite films inevitably introduces many defects at grain boundaries. Though small molecule-based additives have proven to be effective defect passivating agents, their high volatility and diffusivity cannot render perovskite films robust enough against harsh environments. Here we suggest design rules for effective molecules by considering their molecular structure. From these, we introduce a strategy to form macromolecular intermediate phases using long chain polymers, which leads to the formation of a polymer-perovskite composite cross-linker. The cross-linker functions to bridge the perovskite grains, minimizing grain-to-grain electrical decoupling and yielding excellent environmental stability against moisture, light, and heat, which has not been attainable with small molecule defect passivating agents. Consequently, all photovoltaic parameters are significantly enhanced in the solar cells and the devices also show excellent stability

Hydrogen effects on nanomechanical behavior of additively manufactured 316L stainless steels

Additive manufacturing (AM) has received considerable attention in recent years due to its ability to produce complex engineering components with reduced cost and waste, which simply cannot be made with conventional manufacturing processes. It has been reported that AM 316L austenitic stainless steel (SS) has excellent mechanical properties and possibly even breaks the strength-ductility trade-off. For practical industrial application, it is necessary to investigate the AM steel\u27s resistance to hydrogen embrittlement which is unavoidable in most strucral applications. In this work, we explore the hydrogen effects on nanomechanical responses of AM 316L SS (such as hardness, strain rate sensitivity, activation volume). The obtained results will be compared with those of conventional 316L SS and discussed in terms of hydrogen effect on plastic deformation and microstructure. Please click Additional Files below to see the full abstract

Oxygen Partial Pressure during Pulsed Laser Deposition: Deterministic Role on Thermodynamic Stability of Atomic Termination Sequence at SrRuO3/BaTiO3 Interface

With recent trends on miniaturizing oxide-based devices, the need for atomic-scale control of surface/interface structures by pulsed laser deposition (PLD) has increased. In particular, realizing uniform atomic termination at the surface/interface is highly desirable. However, a lack of understanding on the surface formation mechanism in PLD has limited a deliberate control of surface/interface atomic stacking sequences. Here, taking the prototypical SrRuO3/BaTiO3/SrRuO3 (SRO/BTO/SRO) heterostructure as a model system, we investigated the formation of different interfacial termination sequences (BaO-RuO2 or TiO2-SrO) with oxygen partial pressure (PO2) during PLD. We found that a uniform SrO-TiO2 termination sequence at the SRO/BTO interface can be achieved by lowering the PO2 to 5 mTorr, regardless of the total background gas pressure (Ptotal), growth mode, or growth rate. Our results indicate that the thermodynamic stability of the BTO surface at the low-energy kinetics stage of PLD can play an important role in surface/interface termination formation. This work paves the way for realizing termination engineering in functional oxide heterostructures.Comment: 27 pages, 6 figures, Supporting Informatio