Electromagnetic and mechanical AC loss of an ITER TF model coil conductor (DP4) under transverse cyclic loading

Energising a coil results in a transverse force on the strands pushing the cable towards one side of the jacket. This load causes a transverse compressive strain in strands and in particular in strand crossover points. Besides this, contact surfaces interfere by micro-sliding resulting in friction and anomalous contact resistance behaviour versus force. Two Central Solenoid Model Coil conductors have been tested previously in a cryogenic press and now the experimental results are presented for the Toroidal Field Model Coil (TFMC) conductor (DP4). The press can transmit a variable (cyclic) force of at least 650 kN/m directly to a cable section of 400 mm at 4.2 K. The magnetisation of the conductor and the interstrand resistance (Rc) between various strands inside the cable can be measured by varying pressure. The force on the cable and the displacement are monitored simultaneously in order to determine the effective cable Young's modulus and the mechanical heat generation due to friction and deformation. The mechanical heat generation, the coupling loss time constant n¿ and the Rc of the full-size ITER TFMC conductor have been studied under load up to 40 full loading cycles. The evolution of Rc is comparable to the behaviour found for the CS Model Coil type of conductors. A significant decrease of the cable coupling current time constant, n¿ and mechanical heat generation after cyclic loading is foun

Electromagnetic and mechanical characterisation of ITER CS-MC conductors affected by transverse cyclic loading, part 1: coupling current loss

The magnetic field generated by a coil acts on the cable which results in a transverse force on the strands. This affects the interstrand contact resistances (Rc), the coupling current loss and current redistribution during field changes. A special cryogenic press has been built to study the mechanical and electrical properties of full-size ITER conductor samples under transverse, mechanical loading. The cryogenic press can transmit a variable (cyclic) force up to 650 kN/m to a conductor section of 400 mm length at 4.2 K. The jacket is partly opened in order to transmit the force directly onto the cable. In addition a superconducting dipole coil provides the magnetic field required to perform magnetisation measurements using pick-up coils. The various Rc's between strands selected from different positions inside the cable have been studied. The coupling loss time constants (nτ) during and after loading are verified for the Nb3Sn, 45 kA, 10 and 13 T, ITER Model Coil conductors. A summary of the results obtained with up to several tens of full loading cycles is presented. A significant decrease of the cable nτ after several cycles is observed. The values of the nτ's are discussed with respect to the Rc measurements and a multiple time constant model (MTC)

Electromagnetic and mechanical characteristaion of ITER CS-MC conductors affected by transverse cyclic loading, part 3: mechanical properties

The magnetic field and current of a coil wound with a cable-in-conduit conductor causes a transverse force pushing the cable to one side of the conduit. This load causes elastic and plastic deformation with friction as well as heating due to friction. A special cryogenic press has been built to study the mechanical and electrical properties of full-size ITER conductors under transverse mechanical loading. The cryogenic press can transmit at 4.2 K cyclic forces of 650 kN/m to conductor sections of 400 mm length representative of the peak load on a 50 kA conductor at 13 T. In order to transmit the force directly onto the cable, the conduit is opened partly to allow the cable deformation. The force acting on the cable as well as the displacement are monitored simultaneously in order to determine the mechanical heat generation due to friction. The mechanical loss under load is investigated for the Nb3Sn, 45 kA, 10 and 13 T, central solenoid model cell conductors (CSMC). The mechanical heat generation is determined from the hysteresis in the measured curves of displacement versus applied force. The first results of the effect of some 40 loading cycles are presented and the two conductors are compared. A significant decrease of the cable mechanical heat generation after loading cycles is observed

Presence and species identity of rumen flukes in cattle and sheep in the Netherlands

The purpose of the study was to gain knowledge about the prevalence and identity of rumen flukes (RF) in cattle and sheep in the Netherlands. Routine faecal examinations of diagnostic submissions between May 2009 and September 2014 showed a mean annual herd or flock RF prevalence of 15.8% for cattle and 8.0% for sheep. Prevalence in cattle was higher after 2012 than before, which may reflect a change in detection method as well as an increase in true prevalence. During November and December 2014, an abattoir survey was conducted to allow for scoring of rumen fluke burden and to obtain specimens for molecular species characterization. Over 8 visits to 5 abattoirs in areas deemed to pose a high risk for trematode infection, 116 cows and 41 sheep from 27 herds and 10 flocks were examined. Prevalence of RF was higher in beef cattle than in dairy cattle and higher in cattle than in sheep. Median fluke burden was >100 specimens per animal for most positive animals. Using a semi-quantitative RF density score as a gold standard, sensitivity and specificity of a modified quantitative Dorsman egg counting method were estimated at 82.6% and 83.3%, respectively. Of 14 collected adult rumen flukes, twelve (8 bovine and 4 ovine specimens) were identified as Calicophoron daubneyi. The other two, of bovine origin, were identified as Paramphistomum leydeni, which was unexpected as in other European countries all recently collected rumen flukes in both cattle and sheep were identified as C. daubneyi. The findings implicate that multiple rumen fluke species, intermediate host species and transmission cycles may play a role in rumen fluke infections in the Netherlands

Event Reconstruction in the PHENIX Central Arm Spectrometers

The central arm spectrometers for the PHENIX experiment at the Relativistic Heavy Ion Collider have been designed for the optimization of particle identification in relativistic heavy ion collisions. The spectrometers present a challenging environment for event reconstruction due to a very high track multiplicity in a complicated, focusing, magnetic field. In order to meet this challenge, nine distinct detector types are integrated for charged particle tracking, momentum reconstruction, and particle identification. The techniques which have been developed for the task of event reconstruction are described.Comment: Accepted for publication in Nucl. Instrum. A. 34 pages, 23 figure

Partisan Views of the Economy

In this paper it is argued that political parties may have incentives to adopt a partisan view on the working of the economic system. Our approach is based on a dynamical spatial voting model in which political parties are policy oriented. This model revolves around two interrelated issues x and y. The policy maker sets x directly. There exist two views on the relationship between x and y. Model uncertainty confronts policy makers with the problem of the selection of a model to base their actions on. We show that if voters have imperfect information about the working of the economic system that model selection contains a strategic element. Policy makers are inclined to adopt a view on the working of the economic system which fits in with their preferences. There is no inherent logic that places monetarists to the right of New Economists. They have different models of economic mechanism, but they need not have different political values. A conservative can be a Keynesian and a liberal a monetarist. These combinations are in fact surprisingly rare. James Tobin, 1974,The New Economics One Decade Older, p. 62. I am greatly indebted to Peter Broer, Ben Heydra, Jos Jansen and Wilko Letterie for many helpful suggestions. Furthermore, I would like to thank an anonymous referee for his comments

Coupling of stratospheric warmings with mesospheric coolings in observations and simulations

AbstractThe vertical coupling between the stratosphere and the mesosphere is diagnosed from polar cap temperatures averaged over 60°–90°N with a new method: the joint occurrence of a warm stratosphere at 10 hPa and a cold mesosphere at 0.01 hPa. The investigation of an 11-yr-long dataset (2004–15) from Aura-MLS observations shows that such mesospheric coupling days appear in 7% of the winter. During major sudden stratospheric warming events mesospheric couplings are present with an enhanced average daily frequency of 22%. This daily frequency changes from event to event but broadly results in five of seven major warmings being classified as mesospheric couplings (2006, 2008, 2009, 2010, and 2013). The observed fraction of mesospheric coupling events (71%) is compared with simulations of the Kühlungsborn Mechanistic Circulation Model (KMCM), the Hamburg Model of the Neutral and Ionized Atmosphere (HAMMONIA), and the Whole Atmosphere Community Climate Model (WACCM). The simulated fraction of mesospheric coupling events ranges between 57% and 94%, which fits the observations. In searching for causal relations weak evidence is found that major warming events with strong intensity or split vortices favor their coupling with the upper mesosphere. More evidence is found with a conceptual model: an effective vertical coupling between 10 and 0.01 hPa is provided by deep zonal-mean easterlies at 60°N, which are acting as a gravity-wave guide. The explained variance is above 40% in the four datasets, which indicates a near-realistic simulation of this process

Moon Shadow by Cosmic Rays under the Influence of Geomagnetic Field and Search for Antiprotons at Multi-TeV Energies

We have observed the shadowing of galactic cosmic ray flux in the direction of the moon, the so-called moon shadow, using the Tibet-III air shower array operating at Yangbajing (4300 m a.s.l.) in Tibet since 1999. Almost all cosmic rays are positively charged; for that reason, they are bent by the geomagnetic field, thereby shifting the moon shadow westward. The cosmic rays will also produce an additional shadow in the eastward direction of the moon if cosmic rays contain negatively charged particles, such as antiprotons, with some fraction. We selected 1.5 x10^{10} air shower events with energy beyond about 3 TeV from the dataset observed by the Tibet-III air shower array and detected the moon shadow at $\sim 40 \sigma$ level. The center of the moon was detected in the direction away from the apparent center of the moon by 0.23$^\circ$ to the west. Based on these data and a full Monte Carlo simulation, we searched for the existence of the shadow produced by antiprotons at the multi-TeV energy region. No evidence of the existence of antiprotons was found in this energy region. We obtained the 90% confidence level upper limit of the flux ratio of antiprotons to protons as 7% at multi-TeV energies.Comment: 13pages,4figures; Accepted for publication in Astroparticle Physic

The Business Model: Recent Developments and Future Research

This article provides a broad and multifaceted review of the received literature on business models in which the authors examine the business model concept through multiple subject-matter lenses. The review reveals that scholars do not agree on what a business model is and that the literature is developing largely in silos, according to the phenomena of interest of the respective researchers. However, the authors also found emerging common themes among scholars of business models. Specifically, (1) the business model is emerging as a new unit of analysis; (2) business models emphasize a system-level, holistic approach to explaining how firms “do business”; (3) firm activities play an important role in the various conceptualizations of business models that have been proposed; and (4) business models seek to explain how value is created, not just how it is captured. These emerging themes could serve as catalysts for a more unified study of business models