Vegetation composition and soil nutrients status from polyculture to monoculture

The study was conducted on status of nutrients in three major types of forests namely, broad-leaved, mixed pine and pine forests in Meghalaya, considering altitude and seasonality as variables. The findings revealed that the change in micro-environmental conditions as influenced by attitude and seasonality has marked effect on status and release of nutrients in the soil of representative forest stands at markedly difference. The ambient and soil temperature was sharply greater at high altitude (Upper Shillong) and values were decreased from broad-leaved to pine forests. The soil temperature was lower than air temperature in all cases. The soil temperature at low altitude (Umroi) during postmonsoon season was higher than pre-monsoon season; however, on the contrary, it was higher during pre-monsoon season in other cases. The light interception decreased from broad-leaved to pine forests, and greater values were recorded at high altitude. The light interception and temperature played a key role in determining relative humidity, and as a result more relative humidity was recorded at high altitude and the values were decreased from broad-leaved to pine forests. The litter thickness and litter accumulation on forest floor at high altitude was about two fold greater than representative forest at low altitude. The values were higher during post-monsoon season, except that more litter thickness was noticed during pre-monsoon season at high altitude; this could be linked with high litter production and low rate of litter decomposition. Soil moisture content was always higher in top-soil, and post-monsoon season showed greater values. Soil pH ranged from 4.6 to 5.8 in top-soil, and from 4.8 to 6.3 in sub-soil. High rate of litter decomposition leads to greater soil pH in top-soil during postmonsoon season. The organic carbon, total nitrogen and available phosphorus contents were more in top-soil, with exception that the phosphorus content was generally higher in sub-soil during postmonsoon season. The values for soil moisture, organic carbon, nitrogen, and phosphorus were markedly higher at high altitude with respect to forest types and seasonality. Normally, the nutrient poor soil has high C:N ratio, and on account of this fertility of soil decreased from polyculture to monoculture. The finding reveal that the C:N ratio was increased from broad-leaved to pine forests, and more values were observed in sub-soil.Key words: Altitude, monoculture, nutrient release, polyculture, seasonality, top-soil and sub-soil, vegetation

Effect of Crop Establishment Methods on Crop Yield, Weed Dynamics, Profitability and Nutrient Uptake Under Rice-Wheat Cropping System of Indo-Gangetic Plains of Eastern India

The rice–wheat cropping system covering 13.5 million ha in the Indo-Gangetic Plains in South-Asia is vital for food security. Water, energy and labour scarcity, increasing cost of production, diminishing farm profit and the changing climate are major challenges faced by the farmers under intensive tillage based conventional practices. In a field study, we evaluated productivity, weed dynamics, nutrient uptake and economical profitability of four wheat establishment methods during two years. The wheat establishment methods included zero-till wheat (ZTW), happy seeder planted wheat (HSW), bed planted wheat (BPW) and conventional till wheat (CTW). The treatments were completely randomized and replicated five times. Wheat grain yield under HSW was 3.4% and 4.1% higher than BPW, 8.3% and 11.0% higher than ZTW and 20.8% and 24.5% higher than CTW in 2012-13 and 2013-14, respectively. Nutrient (N, P and K) uptake in wheat grain was also higher in HSW than in the other treatments. Weed density and biomass was the lowest under HSW followed by BPT, and the highest in CTW. The weed pressure was reduced in the second growing season compared to the first. Net profit and benefit cost ratio was highest under HSW and the lowest under CTW. This record was migrated from the OpenDepot repository service in June, 2017 before shutting down

Practical computational toolkits for dendrimers and dendrons structure design

Dendrimers and dendrons offer an excellent platform for developing novel drug delivery systems and medicines. The rational design and further development of these repetitively branched systems are restricted by difficulties in scalable synthesis and structural determination, which can be overcome by judicious use of molecular modelling and molecular simulations. A major difficulty to utilise in silico studies to design dendrimers lies in the laborious generation of their structures. Current modelling tools utilise automated assembly of simpler dendrimers or the inefficient manual assembly of monomer precursors to generate more complicated dendrimer structures. Herein we describe two novel graphical user interface (GUI) toolkits written in Python that provide an improved degree of automation for rapid assembly of dendrimers and generation of their 2D and 3D structures. Our first toolkit uses the RDkit library, SMILES nomenclature of monomers and SMARTS reaction nomenclature to generate SMILES and mol files of dendrimers without 3D coordinates. These files are used for simple graphical representations and storing their structures in databases. The second toolkit assembles complex topology dendrimers from monomers to construct 3D dendrimer structures to be used as starting points for simulation using existing and widely available software and force fields. Both tools were validated for ease-of-use to prototype dendrimer structure and the second toolkit was especially relevant for dendrimers of high complexity and size.Peer reviewe

Successful bone marrow transplantation in a patient with Diamond-Blackfan anemia with co-existing Duchenne muscular dystrophy: a case report

<p>Abstract</p> <p>Introduction</p> <p>Diamond-Blackfan anemia and Duchenne muscular dystrophy are two rare congenital anomalies. Both anomalies occurring in the same child is extremely rare. Allogeneic hematopoietic stem cell transplantation is a well-established therapy for Diamond-Blackfan anemia. However, in patients with Duchenne muscular dystrophy, stem cell therapy still remains experimental.</p> <p>Case presentation</p> <p>We report the case of a nine-year-old boy of north Indian descent with Diamond-Blackfan anemia and Duchenne muscular dystrophy who underwent successful allogeneic hematopoietic stem cell transplantation. He is transfusion-independent, and his Duchenne muscular dystrophy has shown no clinical deterioration over the past 45 months. His creatine phosphokinase levels have significantly decreased to 300 U/L from 14,000 U/L pre-transplant. The patient is 100% donor chimera in the hematopoietic system, and his muscle tissue has shown 8% to 10.4% cells of donor origin.</p> <p>Conclusion</p> <p>Our patient's Diamond-Blackfan anemia was cured by allogeneic hematopoietic stem cell transplantation. The interesting clinical observation of a possible benefit in Duchenne muscular dystrophy cannot be ruled out. However, further clinical follow-up with serial muscle biopsies and molecular studies are needed to establish this finding.</p

Simulations of extensional flow in microrheometric devices

We present a detailed numerical study of the flow of a Newtonian fluid through microrheometric devices featuring a sudden contraction–expansion. This flow configuration is typically used to generate extensional deformations and high strain rates. The excess pressure drop resulting from the converging and diverging flow is an important dynamic measure to quantify if the device is intended to be used as a microfluidic extensional rheometer. To explore this idea, we examine the effect of the contraction length, aspect ratio and Reynolds number on the flow kinematics and resulting pressure field. Analysis of the computed velocity and pressure fields show that, for typical experimental conditions used in microfluidic devices, the steady flow is highly three-dimensional with open spiraling vortical structures in the stagnant corner regions. The numerical simulations of the local kinematics and global pressure drop are in good agreement with experimental results. The device aspect ratio is shown to have a strong impact on the flow and consequently on the excess pressure drop, which is quantified in terms of the dimensionless Couette and Bagley correction factors. We suggest an approach for calculating the Bagley correction which may be especially appropriate for planar microchannels

A miR-200b/200c/429-Binding Site Polymorphism in the 3′ Untranslated Region of the AP-2α Gene Is Associated with Cisplatin Resistance

The transcription factor AP-2α functions as a tumor suppressor by regulating various genes that are involved in cell proliferation and apoptosis. Chemotherapeutic drugs including cisplatin induce post-transcriptionally endogenous AP-2α, which contributes to chemosensitivity by enhancing therapy-induced apoptosis. microRNAs (miRNAs) miR-200b, miR-200c and miR-429 (miR-200b/200c/429) are up-regulated in endometrial and esophageal cancers, and their overexpression correlates with resistance to cisplatin treatment. Using computational programs, we predicted that the 3′ untranslated region (UTR) of AP-2α gene contains a potential miRNA response element (MRE) for the miR-200b/200c/429 family, and the single nucleotide polymorphism (SNP) site rs1045385 (A or C allele) resided within the predicted MRE. Luciferase assays and Western blot analysis demonstrated that the miR-200b/200c/429 family recognized the MRE in the 3′ UTR of AP-2α gene and negatively regulated the expression of endogenous AP-2α proteins. SNP rs1045385 A>C variation enhanced AP-2α expression by disrupting the binding of the miR-200b/200c/429 family to the 3′ UTR of AP-2α. The effects of the two polymorphic variants on cisplatin sensitivity were determined by clonogenic assay. The overexpression of AP-2α with mutant 3′ UTR (C allele) in the endometrial cancer cell line HEC-1A, which has high levels of endogenous miR-200b/200c/429 and low levels of AP-2α protein, significantly increased cisplatin sensitivity, but overexpression of A allele of AP-2α has no significant effects, compared with mock transfection. We concluded that miR-200b/200c/429 induced cisplatin resistance by repressing AP-2α expression in endometrial cancer cells. The SNP (rs1045385) A>C variation decreased the binding of miR-200b/200c/429 to the 3′ UTR of AP-2α, which upregulated AP-2α protein expression and increased cisplatin sensitivity. Our results suggest that SNP (rs1045385) may be a potential prognostic marker for cisplatin treatment

A Transcript Cleavage Factor of Mycobacterium tuberculosis Important for Its Survival

After initiation of transcription, a number of proteins participate during elongation and termination modifying the properties of the RNA polymerase (RNAP). Gre factors are one such group conserved across bacteria. They regulate transcription by projecting their N-terminal coiled-coil domain into the active center of RNAP through the secondary channel and stimulating hydrolysis of the newly synthesized RNA in backtracked elongation complexes. Rv1080c is a putative gre factor (MtbGre) in the genome of Mycobacterium tuberculosis. The protein enhanced the efficiency of promoter clearance by lowering abortive transcription and also rescued arrested and paused elongation complexes on the GC rich mycobacterial template. Although MtbGre is similar in domain organization and shares key residues for catalysis and RNAP interaction with the Gre factors of Escherichia coli, it could not complement an E. coli gre deficient strain. Moreover, MtbGre failed to rescue E. coli RNAP stalled elongation complexes, indicating the importance of specific protein-protein interactions for transcript cleavage. Decrease in the level of MtbGre reduced the bacterial survival by several fold indicating its essential role in mycobacteria. Another Gre homolog, Rv3788 was not functional in transcript cleavage activity indicating that a single Gre is sufficient for efficient transcription of the M. tuberculosis genome

Alterations of renal phenotype and gene expression profiles due to protein overload in NOD-related mouse strains

BACKGROUND: Despite multiple causes, Chronic Kidney Disease is commonly associated with proteinuria. A previous study on Non Obese Diabetic mice (NOD), which spontaneously develop type 1 diabetes, described histological and gene expression changes incurred by diabetes in the kidney. Because proteinuria is coincident to diabetes, the effects of proteinuria are difficult to distinguish from those of other factors such as hyperglycemia. Proteinuria can nevertheless be induced in mice by peritoneal injection of Bovine Serum Albumin (BSA). To gain more information on the specific effects of proteinuria, this study addresses renal changes in diabetes resistant NOD-related mouse strains (NON and NOD.B10) that were made to develop proteinuria by BSA overload. METHODS: Proteinuria was induced by protein overload on NON and NOD.B10 mouse strains and histology and microarray technology were used to follow the kidney response. The effects of proteinuria were assessed and subsequently compared to changes that were observed in a prior study on NOD diabetic nephropathy. RESULTS: Overload treatment significantly modified the renal phenotype and out of 5760 clones screened, 21 and 7 kidney transcripts were respectively altered in the NON and NOD.B10. Upregulated transcripts encoded signal transduction genes, as well as markers for inflammation (Calmodulin kinase beta). Down-regulated transcripts included FKBP52 which was also down-regulated in diabetic NOD kidney. Comparison of transcripts altered by proteinuria to those altered by diabetes identified mannosidase 2 alpha 1 as being more specifically induced by proteinuria. CONCLUSION: By simulating a component of diabetes, and looking at the global response on mice resistant to the disease, by virtue of a small genetic difference, we were able to identify key factors in disease progression. This suggests the power of this approach in unraveling multifactorial disease processes