Production of methylmercury by sulphate-reducing bacteria in sediments from the orbetello lagoon in presence of high macroalgal loads

Methylmercury is a potent neurotoxin affecting shallow-water ecosystems. Mercury polluted sediment samples were collected at six different sites in the Orbetello Lagoon (central Italy) characterized by high levels of silt, iron, manganese hydroxides, and organic matter originated the latter originated from the decomposition of macroalgae. Porous water pointed out the presence of sulphates, methylmercury, and sulphides. Slurries arranged in anaerobic conditions from sediment aliquots from the six sites, with the addition of ionic mercury, highlighted the production of methylmercury. Sulphate reducing bacteria (SRB) were quantified in lagoon sediments; furthermore, sediments cultured under anaerobic conditions showed SRBs active in mercury methylation. Anaerobic cultures of SRB, amended with ionic mercury, produced methylmercury during the growth of bacterial cells. The percentage of aerobic mercury resistant bacteria was pointed out at each sampling site, evidencing the presence of bioavailable mercury. Several aerobic mercury resistant bacteria were isolated and their level of resistance to inorganic and organic forms of mercury was evaluated. These isolates may be potentially used for eventual bioremediation processes. Mercury methylation by SRB in the Orbetello Lagoon sediments was described for the first time, focusing the attention on the need for possible bioremediation processes by using autochthonous mercury resistant bacteria. Moreover, the influence of algal biomass on mercury methylation was highlighted for the first time in this lagoon ecosystem. The importance of removing algal biomass, as it represents a source of organic matter favouring the process of mercury methylation, was strongly pointed out in this study

Complementary Degradation of Fuel Oil in Superficial Waters and in Axenic Cultures of Aerobic Gram-negative Bacteria Isolated from Venice Lagoon

The percentages of bacteria degrading fuel oil (n-paraffins from C*2 to C28) were determined in three stations in the northern part of Venice Lagoon. Concentrations of paraffin-degrading bacteria ranged from 8 to 70 bacteria per 100 mL in the least polluted station close to the sea, and from 33 to 345 bacteria per 100 mL in the most polluted station near Porto Marghera. Biological oxygen demand with fuel oil additions was higher in this station, where oxygen was totally depleted in 7 and 5 days in November and June respectively. Twenty-five bacterial strains were isolated from agar plates amended with fuel oil as the sole carbon and energy source; only two were Acinetobacter spp. strains. Strain VE-C3 grew in the presence of n-paraffins. Growth was inducible with a generation time of 2.77 h and an oxygen consumption rate of 53 pL h-1 mg-1 of cells (d.w.). Five other strains thrived on intermediate oxidation products of n-paraffin

Two naphthalene degrading bacteria belonging to the genera Paenibacillus and Pseudomonas isolated from a highly polluted lagoon perform different sensitivities to the organic and heavy metal contaminants

Two bacterial strains were isolated in the presence of naphthalene as the sole carbon and energy source from sediments of the Orbetello Lagoon, Italy, which is highly contaminated with both organic compounds and metals. 16S rRNA gene sequence analysis of the two isolates assigned the strains to the genera Paenibacillus and Pseudomonas. The effect of different contaminants on the growth behaviors of the two strains was investigated. Pseudomonas sp. ORNaP2 showed a higher tolerance to benzene, toluene, and ethylbenzene than Paenibacillus sp. ORNaP1. In addition, the toxicity of heavy metals potentially present as co-pollutants in the investigated site was tested. Here, strain Paenibacillus sp. ORNaP1 showed a higher tolerance towards arsenic, cadmium, and lead, whereas it was far more sensitive towards mercury than strain Pseudomonas sp. ORNaP2. These differences between the Gram-negative Pseudomonas and the Gram-positive Paenibacillus strain can be explained by different general adaptive response systems present in the two bacteria

Antibiotic-Resistant Bacteria in Aquaculture and Climate Change: A Challenge for Health in the Mediterranean Area

Aquaculture is the productive activity that will play a crucial role in the challenges of the millennium, such as the need for proteins that support humans and the respect for the environment. Aquaculture is an important economic activity in the Mediterranean basin. A great impact is presented, however, by aquaculture practices as they involve the use of antibiotics for treatment and prophylaxis. As a consequence of the use of antibiotics in aquaculture, antibiotic resistance is induced in the surrounding bacteria in the column water, sediment, and fish-associated bacterial strains. Through horizontal gene transfer, bacteria can diffuse antibiotic-resistance genes and mobile resistance genes further spreading genetic determinants. Once triggered, antibiotic resistance easily spreads among aquatic microbial communities and, from there, can reach human pathogenic bacteria, making vain the use of antibiotics for human health. Climate change claims a significant role in this context, as rising temperatures can affect cell physiology in bacteria in the same way as antibiotics, causing antibiotic resistance to begin with. The Mediterranean Sea represents a ‘hot spot’ in terms of climate change and aspects of antibiotic resistance in aquaculture in this area can be significantly amplified, thus increasing threats to human health. Practices must be adopted to counteract negative impacts on human health, with a reduction in the use of antibiotics as a pivotal point. In the meantime, it is necessary to act against climate change by reducing anthropogenic impacts, for example by reducing CO2 emissions into the atmosphere. The One Health type approach, which involves the intervention of different skills, such as veterinary, ecology, and medicine in compliance with the principles of sustainability, is necessary and strongly recommended to face these important challenges for human and animal health, and for environmental safety in the Mediterranean area

Sea Level Rise Impacts in Coastal Areas and Possible Mitigation Engineering Approaches

Coastal areas are subjected to both natural and man-made actions, leading to a deterioration of coastal structures. Climate change has had a heavy impact on these areas in recent years. An important consequence of these actions is sea level rise. This phenomenon is the most important cause of coastal erosion, a serious problem with ecological, economic, and human health consequences. The countermeasures to contrast this phenomenon and the degradation of the entire coastal system, are represented by engineering interventions. These basically consist of approaches for adaptation to sea level rise, namely protection, retreat, and accommodation. Variations and site adaptation of these actions can involve procedures of no intervention; advancement; protection; retreat; accommodation; and ecosystem-based adaptation. While these procedures have provided coastal benefits and protection, in the long run, they may cause further coastal disruption and further aggravate the situation. Such interventions, therefore, require an accurate assessment of the advantages and disadvantages. However, it is certainly necessary to proceed with actions aimed at mitigating climate change, respecting the rules in a sustainable way

Production of methyl mercury by sulphate-reducing bacteria in sediments from the Orbetello lagoon in presence of high macroalgal loads

Methylmercury is a potent neurotoxin affecting shallow-water ecosystems. Mercury polluted sediment samples were collected at six different sites in the Orbetello Lagoon (central Italy) characterized by high levels of silt, iron, manganese hydroxides, and organic matter originated the latter originated from the decomposition of macroalgae. Porous water pointed out the presence of sulphates, methylmercury, and sulphides. Slurries arranged in anaerobic conditions from sediment aliquots from the six sites, with the addition of ionic mercury, highlighted the production of methylmercury. Sulphate reducing bacteria (SRB) were quantified in lagoon sediments; furthermore, sediments cultured under anaerobic conditions showed SRBs active in mercury methylation. Anaerobic cultures of SRB, amended with ionic mercury, produced methylmercury during the growth of bacterial cells. The percentage of aerobic mercury resistant bacteria was pointed out at each sampling site, evidencing the presence of bioavailable mercury. Several aerobic mercury resistant bacteria were isolated and their level of resistance to inorganic and organic forms of mercury was evaluated. These isolates may be potentially used for eventual bioremediation processes. Mercury methylation by SRB in the Orbetello Lagoon sediments was described for the first time, focusing the attention on the need for possible bioremediation processes by using autochthonous mercury resistant bacteria. Moreover, the influence of algal biomass on mercury methylation was highlighted for the first time in this lagoon ecosystem. The importance of removing algal biomass, as it represents a source of organic matter favouring the process of mercury methylation, was strongly pointed out in this stud

Growth of Rhodosporidium toruloides Strain DBVPG 6662 on Dibenzothiophene Crystals and Orimulsion

Strains DBVPG 6662 and DBVPG 6739 of Rhodosporidium toruloides, a basidiomycete yeast, grew on thiosulfate as a sulfur source and glucose (2 g liter(−1) or 10.75 mM) as a carbon source. DBVPG 6662 has a defective sulfate transport system, whereas DBVPG 6739 barely grew on sulfate. They were compared for the ability to use dibenzothiophene (DBT) and related organic sulfur compounds as sulfur sources. In the presence of glucose as a carbon source and DBT as a sulfur source, strain DBVPG 6662 grew better than DBVPG 6739. In the presence of thiosulfate as a sulfur source, the two yeast strains did not use DBT, DBT-sulfone, benzenesulfonic acid, biphenyl, and fluorene. When the two strains were grown in the presence of glucose, strain DBVPG 6662 transformed 27% of the DBT present (10 μM) at a rate of 0.023 μmol liter(−1) h(−1) in 36 h. Traces of 2,2′-dihydroxylated biphenyl were transiently accumulated under these conditions. When the same strain was grown on glucose in the presence of a higher concentration of DBT (0.5 g liter(−1)), mainly in an insoluble form, the whole surface of the DBT crystals was colonized by a thick mycelium. This adherent structure was imaged by confocal microscopy with fluorescent concanavalin A, a lectin that specifically binds glucose and mannose residues. When DBVPG 6662 was grown on glucose in the presence of a commercial emulsion of bitumen, i.e., orimulsion, 68% of the benzo- and dibenzothiophenes and DBTs was removed after 15 days of incubation. The fungus adhered by hyphae to orimulsion droplets. When cultivated in the presence of commercial emulsifier-free fuel oil containing alkylated benzothiophenes and DBTs and having a composition similar to that of orimulsion, strain DBVPG 6662 removed only 11% of the total organic sulfur that occurs in the medium and did not adhere to the oil droplets. These results indicate that strain DBVPG 6662 is able to utilize the organic sulfur of DBT and a large variety of thiophenic compounds that occur extensively in commercial fuel oils by physically adhering to the organic sulfur source