2,473 research outputs found
Supplementing fructose-based block supplements to forage-fed cattle increases capacity for lactic acid metabolism
Acidosis is one of the more important maladies afflicting cattle fed significant amounts
of grain and has enormous economic impact for feedlots, dairies, and producers of
seed stock. The highest incidence of acidosis occurs when animals are being transitioned
from high-roughage diets to diets containing high levels of concentrates. When
grain-based diets are consumed in excess, consumed too quickly, or fed without proper
adaptation, digestive end products (organic acids) can accumulate within the rumen,
resulting in acidosis. Lactic acid is one of the key organic compounds that accumulates
under these conditions. Coupled with the animal’s limited ability to metabolize lactate,
accumulation of lactic acid in the rumen lowers ruminal pH and subsequently depresses
feed intake. One means of preventing acidosis is to directly populate the rumen with
lactate-utilizing bacteria. Alternatively, exposure to low levels of lactate (i.e., levels insufficient
to harm the animal) may stimulate development of a population of lactate-utilizing
bacteria. The objective of our study was to determine if supplementing low-moisture
blocks made of high fructose corn syrup could increase ruminal lactate concentrations
and subsequently stimulate growth of lactate-metabolizing bacteria. If successful, this
could prove useful for adapting forage-fed cattle to grain-based diets
Hydrated lime matrix decreases ruminal biohydrogenation of flaxseed fatty acids
Omega-3 fatty acids are essential nutrients for humans, but dietary intake of these
nutrients by many Americans is inadequate due to low consumption of omega-3-rich
foods such as fish, walnuts, and flaxseed. In contrast, per capita consumption of red
meat is relatively high, but these products normally contain only small amounts of
omega-3 fatty acids. Feeding cattle diets that contain omega-3 fatty acids has consistently
increased the proportion of the desirable fats that accumulate in beef. Unfortunately,
the proportion of dietary omega-3 fats that are deposited into beef tissues is
relatively low, because microorganisms within the rumen biohydrogenate the unsaturated
omega-3 fatty acids extensively to produce the saturated fats that are characteristic
of beef fat. Encapsulation of fats has been proposed as a method for improving efficiency
of transfer of omega-3 fats into beef. Encapsulation processes apply a protective
barrier on the surface of fats or fat-containing feeds, which theoretically decreases fats’
susceptibility to microbial biohydrogenation. Protective coatings must remain intact to
retain their functionality, and physical damage to the coatings that occurs with normal
handling can result in poor efficacy because the core material is exposed to microorganisms
in the rumen. Embedding feed particles within a homogeneous protective matrix
constitutes a potentially useful alternative to protective surface barriers. The matrix is
created by mixing feed particles that are to be protected with a suitable matrix material
that is resistant to microbial digestion and subsequently forming the mixture into pills.
In cases where physical damage occurs, exposure of the core material is confined to the
broken surface, and the remainder of the matrix retains its ruminal stability.
The objective of this study was to determine if embedding flaxseed within a matrix of
hydrated dolomitic lime could be used as a method to decrease biohydrogenation of
polyunsaturated omega-3 fatty acids, thus improving efficiency of omega-3 fatty acids
absorption into the bloodstream
Orally dosing steers with Lactipro (Megasphaera elsdenii) decreases the quantity of roughages fed during finishing
The cost of roughages is relatively high in comparison to their contribution of nutrients to feedlot diets. Widespread drought has affected roughage supplies in the cattle-feeding regions of the United States, further increasing the cost of roughages for feedlots. Despite their relatively high cost, roughages are incorporated into finishing diets to maintain rumen function and to manage ruminal acidosis. The greatest proportion of roughage is utilized early in the feeding period when cattle are being transitioned from forage-based diets to concentrate-based diets, allowing ruminal microbes to adapt gradually to higher levels of starch and sugars. If cattle are not properly adapted to concentrate-based diets, undesirable lactic acid-producing microorganisms, such as Streptococcus bovis, can rapidly proliferate and produce large excesses of lactic acid in the rumen. This condition can precipitate feedlot acidosis, which can have serious consequences for health and performance of cattle. Lactipro (MS Biotec, Wamego, KS) is a probiotic drench containing Megasphaera elsdenii, which is a lactate-utilizing bacterium that prevents lactic acid accumulations in the rumen of grain-fed cattle. Lactipro has been used successfully to accelerate the adaptation of cattle from roughage-based diets to concentrate-based diets. The objective of this study was to determine if Lactipro could be utilized to eliminate the step-up period for feedlot cattle, and in so doing decrease the amount of roughage required during the finishing period
Laboratory-Model Integrated-System FARAD Thruster
Pulsed inductive plasma accelerators are spacecraft propulsion devices in which energy is stored in a capacitor and then discharged through an inductive coil. The device is electrodeless, inducing a plasma current sheet in propellant located near the face of the coil. The propellant is accelerated and expelled at a high exhaust velocity (order of 10 km/s) through the interaction of the plasma current with an induced magnetic field. The Faraday Accelerator with RF-Assisted Discharge (FARAD) thruster [1,2] is a type of pulsed inductive plasma accelerator in which the plasma is preionized by a mechanism separate from that used to form the current sheet and accelerate the gas. Employing a separate preionization mechanism in this manner allows for the formation of an inductive current sheet at much lower discharge energies and voltages than those found in previous pulsed inductive accelerators like the Pulsed Inductive Thruster (PIT). In a previous paper [3], the authors presented a basic design for a 100 J/pulse FARAD laboratory-version thruster. The design was based upon guidelines and performance scaling parameters presented in Refs. [4, 5]. In this paper, we expand upon the design presented in Ref. [3] by presenting a fully-assembled and operational FARAD laboratory-model thruster and addressing system and subsystem-integration issues (concerning mass injection, preionization, and acceleration) that arose during assembly. Experimental data quantifying the operation of this thruster, including detailed internal plasma measurements, are presented by the authors in a companion paper [6]. The thruster operates by first injecting neutral gas over the face of a flat, inductive acceleration coil and at some later time preionizing the gas. Once the gas is preionized current is passed through the acceleration coil, inducing a plasma current sheet in the propellant that is accelerated away from the coil through electromagnetic interaction with the time-varying magnetic field. Neutral gas is injected over the face of the acceleration coil through a fast-acting valve that feeds a central distribution manifold. The thruster is designed to preionize the gas using an RF-frequency ringing signal produced by a discharging Vector Inversion Generator (VIG). The acceleration stage consists of a multiple-turn, multiple-strand spiral induction coil (see Fig. 1, left panel) and is designed for operation at discharge energies on the order of 100 J/pulse. Several different pulsed power train modules can be used to drive current through the acceleration coil. One such power train is based upon the Bernardes and Merryman circuit topology, which restricts voltage reversal on the capacitor banks and can be clamped to eliminate current reversal in the coil. A second option is a pulse-compression-ring power train (see Fig. 1, right panel), which takesa temporally broad, low current pulse and transforms it into a short, high current pulse
Effects of feeding low levels of crude glycerin with or without other by-products on performance and carcass characteristics of feedlot heifers
Expansion of the renewable fuels industries has increased availability of by-products that are well suited for use as cattle feed. Glycerin is among the principal by-products of biodiesel production, comprising approximately 10% (by weight) of the soybean oil that is used to manufacture soy-based diesel fuel. Our previous research evaluated effects of including between 0% and 16% glycerin in flaked-corn finishing diets and revealed that optimal growth performance was achieved with 2% glycerin addition. Our laboratory experiments have suggested that even lower levels of glycerin may be effective at stimulating digestion. Therefore, the objective of this study was to evaluate effects of low levels of glycerin in the diet on performance and carcass characteristics of finishing cattle. Furthermore, because distillers grains and other by-products are increasingly common in feedlot rations, we opted to evaluate glycerin in corn-based finishing diets as well as in diets that consisted of a combination of corn grain, distillers grains, and soybean hulls
Improved description of charged Higgs boson production at hadron colliders
We present a new method for matching the two twin-processes gb->H+/-t and
gg->H+/-tb in Monte Carlo event generators. The matching is done by defining a
double-counting term, which is used to generate events that are subtracted from
the sum of these two twin-processes. In this way we get a smooth transition
between the collinear region of phase space, which is best described by
gb->H+/-t, and the hard region, which requires the use of the gg->H+/-tb
process. The resulting differential distributions show large differences
compared to both the gb-> H+/-t and gg->H+/-tb processes illustrating the
necessity to use matching when tagging the accompanying b-jet.Comment: 21 pages, 9 figures. Revised with updated discussion and reference
High-resolution X-ray spectroscopy of tau Scorpii (B0.2V) with XMM-Newton
We report the analysis of the first high-resolution X-ray spectrum of the
B0.2V star Ď„Â Scorpii obtained with the Reflection Grating
Spectrometers (rg
Recommended from our members
A comparative assessment of the economics of plutonium disposition
The US Department of Energy office of Fissile Materials Disposition (DOE/MD) has been evaluating three technologies for the disposition of approximately 50 metric tons of surplus plutonium from defense-related programs: reactors, immobilization, and deep boreholes. As part of the process supporting an early CY 1997 Record of Decision (ROD), a comprehensive assessment of technical viability, cost, and schedule has been conducted by DOE/MD and its national laboratory contractors. Oak Ridge National Laboratory has managed and coordinated the life-cycle cost (LCC) assessment effort for this program. This paper discusses the economic analysis methodology and the results prior to ROD. A secondary intent of the paper is to discuss major technical and economic issues that impact cost and schedule. To evaluate the economics of these technologies on an equitable basis, a set of cost-estimating guidelines and a common cost-estimating format were utilized by all three technology teams. This paper also includes the major economic analysis assumptions and the comparative constant-dollar and discounted-dollar LCCs
Recommended from our members
A comparative assessment of the economics of plutonium disposition including comparison with other nuclear fuel cycles
DOE has been evaluating three technologies for the disposition of approximately 50 metric tons of surplus plutonium from defense-related programs: reactors, immobilization, and deep boreholes. As part of the process supporting an early CY 1997 Record of Decision (ROD), a comprehensive assessment of technical viability, cost, and schedule has been conducted. Oak Ridge National Laboratory has managed and coordinated the life-cycle cost (LCC) assessment effort for this program. This paper discusses the economic analysis methodology and the results prior to ROD. Other objectives of the paper are to discuss major technical and economic issues that impact plutonium disposition cost and schedule. Also to compare the economics of a once-through weapons-derived MOX nuclear fuel cycle to other fuel cycles, such as those utilizing spent fuel reprocessing. To evaluate the economics of these technologies on an equitable basis, a set of cost estimating guidelines and a common cost-estimating format were utilized by all three technology teams. This paper also includes the major economic analysis assumptions and the comparative constant-dollar and discounted-dollar LCCs
Collapse of non-spherically symmetric scalar field distributions
In the present work the collapse scenario of some exact non-spherical models
with a minimally coupled scalar field is studied. Scalar field collapse with
planar as well as toroidal, cylindrical and pseudoplanar symmetries have been
investigated. It is shown that the scalar field may have collapsing modes even
if it has the equation of state corresponding to that of a dark energy.Comment: 13 pages, 9 figures; Accepted for publication in Gen Relativ Gravit
(2011
- …