Detection of Trace Amounts of Toxic Metals in Environmental Samples by Laser-excited Atomic Fluorescence Spectrometry

Results for the direct determination of trace amounts of Pb and Cd in Antarctic and Greenland ancient ice and recent snow by laser-excited atomic fluorescence spectrometry (LEAFS) are presented. The whole procedure starting from field sampling, mechanical decontamination of the samples in an ultra-clean laboratory and final analysis of the decontaminated samples is described. The measured concentrations varied in the ranges 0.1–3 pg ml^(–1) for Cd and 0.3–30 pg ml^(–1) for Pb. The results for direct analysis by LEAFS agree favourable with those obtained by isotope dilution mass spectrometry and electrothermal atomic absorption spectrometry, which require time-consuming pre-treatment and pre-concentration stages

Temperature Measurements by Wavelength Modulation Diode Laser Absorption Spectroscopy with Logarithmic Conversion and 1<i>f</i> Signal Detection

A new version of a sensor for temperature measurements in the case of strong laser intensity fluctuation was developed. It was based on tunable diode laser absorption spectroscopy (TDLAS) with wavelength modulation, logarithmic conversion of the absorption signal, and detection of the first harmonic of the modulation frequency. The efficiency of the technique was demonstrated under experimental conditions with excess multiplicative noise. Temperature was evaluated from the ratio of integrated absorbance of two lines of the water molecule with different lower energy levels. Two algorithms of data processing were tested, simultaneous fitting of two spectral ranges with selected absorption lines and independent fitting of two absorption lines profiles. The correctness of the gas temperature evaluation was verified by simultaneous measurements with a commercial thermocouple. An error in temperature evaluation of less than 40 at 1000 K was achieved even when processing a single scan of the diode lasers

A Novel Method for the Background Signal Correction in SP-ICP-MS Analysis of the Sizes of Titanium Dioxide Nanoparticles in Cosmetic Samples

We discuss the features involved in determining the titanium dioxide nanoparticle (TiO2NP) sizes in cosmetic samples via single particle inductively coupled plasma mass spectrometry (SP-ICP-MS) in the millisecond-time resolution mode, and methods for considering the background signal. In the SP-ICP-MS determination of TiO2NPs in cosmetics, the background signal was recorded in each dwell time interval due to the signal of the Ti dissolved form in deionized water, and the background signal of the cosmetic matrix was compensated by dilution. A correction procedure for the frequency and intensity of the background signal is proposed, which differs from the known procedures due to its correction by the standard deviation above the background signal. Background signals were removed from the sample signal distribution using the deionized water signal distribution. Data processing was carried out using Microsoft Office Excel and SPCal software. The distributions of NP signals in cosmetic product samples were studied in the dwell time range of 4–20 ms. The limit of detection of the NP size (LODsize) with the proposed background signal correction procedure was 71 nm. For the studied samples, the LODsize did not depend on the threshold of the background signal and was determined by the sensitivity of the mass spectrometer

Possibilities and Limitations of ICP-Spectrometric Determination of the Total Content of Tin and Its Inorganic and Organic Speciations in Waters with Different Salinity Levels—Part 2: Separate Determination of Inorganic and Organic Speciations of Tin

In this study, determination of the inorganic and organic forms of tin in waters of different salinities is considered. The possibility of the separation of speciations of tin using liquid–liquid extraction (LLE); precipitation with fluorides, iodides, ammonia, and iron (III) chloride; and sorption of organotin compounds (OTCs) was studied. The LLE and analyte precipitation methods proved to be ineffective. Inorganic and organic forms of tin were separated by the sorption of OTCs using silica gel sorbent Diapak C18. Under optimized conditions, a technique for the separate determination of the forms of tin in natural waters was developed. The technique combines hydride generation and microwave mineralization of solutions followed by ICP spectrometry. The inorganic forms of tin were determined after their solid-phase separation from organotin compounds. The lower limits of analyte quantification were 0.03 μg/L (ICP-MS) and 0.05 μg/L (ICP-OES), which provide separate determinations of inorganic and organic forms of tin in waters with different salinities. The content of OTCs in water was determined by subtracting the inorganic concentration from the total concentration of tin. The technique will allow a comprehensive assessment of the toxicological impact of tin speciations on the aquatic ecosystem

Optimization, Characterization and Pharmacokinetic Study of Meso-Tetraphenylporphyrin Metal Complex-Loaded PLGA Nanoparticles

The selection of technological parameters for nanoparticle formulation represents a complicated development phase. Therefore, the statistical analysis based on Box–Behnken methodology is widely used to optimize technological processes, including poly(lactic-co-glycolic acid) nanoparticle formulation. In this study, we applied a two-level three-factor design to optimize the preparation of nanoparticles loaded with cobalt (CoTPP), manganese (MnClTPP), and nickel (NiTPP) metalloporphyrins (MeP). The resulting nanoparticles were examined by dynamic light scattering, X-ray diffraction, Fourier transform infrared spectroscopy, MTT test, and hemolytic activity assay. The optimized model of nanoparticle formulation was validated, and the obtained nanoparticles possessed a spherical shape and physicochemical characteristics enabling them to deliver MeP in cancer cells. In vitro hemolysis assay revealed high safety of the formulated MeP-loaded nanoparticles. The MeP release demonstrated a biphasic profile and release mechanism via Fick diffusion, according to release exponent values. Formulated MeP-loaded nanoparticles revealed significant antitumor activity and ability to generate reactive oxygen species. MnClTPP- and CoTPP-nanoparticles specifically accumulated in tissues, preventing wide tissue distribution caused by long-term circulation of the hydrophobic drug. Our results suggest that MnClTPP- and CoTPP-nanoparticles represent the greatest potential for utilization in in anticancer therapy due to their effectiveness and safety

Reversible Sorptive Preconcentration of Noble Metals Followed by FI-ICP-MS Determination

In this paper, we propose the combined procedure of noble metal (NM) determination, including fire assay, acid digestion, and reversible dynamic sorptive preconcentration, followed by flow-injection ICP-MS. Reversible preconcentration of all NMs was carried out using micro-column packed new PVBC-VP sorbent and elution with a mixture of thiourea, potassium thiocyanate, and HCl, which recovers Pd, Ir, Pt, and Au by 95% and Ru, and Rh by 90%. The proposed procedure was approved using certified reference materials

VEGF- and VEGFR2-Targeted Liposomes for Cisplatin Delivery to Glioma Cells

Targeted delivery of anticancer drugs to brain tumors, especially glioblastoma multiforme, which is the most frequent and aggressive type, is one of the important objectives in nanomedicine. Vascular endothelial growth factor (VEGF) and its receptor type II (VEGFR2) are promising targets because they are overexpressed by not only core tumor cells but also by migrated glioma cells, which are responsible for resistance and rapid progression of brain tumors. The purpose of the present study was to develop the liposomal drug delivery system combining enhanced loading capacity of cisplatin and high binding affinity to glioma cells. This was achieved by using of highly soluble cisplatin analogue, <i>cis</i>-diamminedinitratoplatinum­(II), and antibodies against the native form of VEGF or VEGFR2 conjugated to liposome surface. The developed drug delivery system revealed sustained drug release profile, high affinity to antigens, and increased uptake by glioma C6 and U-87 MG cells. Pharmacokinetic study on glioma C6-bearing rats revealed prolonged blood circulation time of the liposomal formulation. The above features enabled the present drug delivery system to overcome both poor pharmacokinetics typical for platinum formulations and low loading capacity typical for conventional liposomal cisplatin formulations