Spontaneous autophoretic motion of isotropic particles

International audienceSuspended colloidal particles interacting chemically with a solute can self-propel by autophoretic motion when they are asymmetrically patterned (Janus colloids). Here we demonstrate theoretically that such anisotropy is not necessary for locomotion and that the nonlinear interplay between surface osmotic flows and solute advection can produce spontaneous and self-sustained motion of isotropic particles. Solving the classical autophoretic framework for isotropic particles, we show that, for given material properties, there exists a critical particle size (or Peclet number) above which spontaneous symmetry-breaking and autophoretic motion occur. A hierarchy of instabilities is further identified for quantized critical Peclet numbers. (C) 2013 AIP Publishing LLC

Report of IRPA task group on the impact of the eye lens dose limits

In 2012 IRPA established a task group (TG) to identify key issues in the implementation of the revised eye lens dose limit. The TG reported its conclusions in 2013. In January 2015, IRPA asked the TG to review progress with the implementation of the recommendations from the early report and to collate current practitioner experience. This report presents the results of a survey on the view of the IRPA professionals on the new limit to the lens of the eye and on the wider issue of tissue reactions. Recommendations derived from the survey are presented. This report was approved by IRPA Executive Council on 31 January 2017

Enhancement and modeling of enzymatic hydrolysis on cellulose from Agave bagasse hydrothermally pretreated in a horizontal bioreactor

One of the major challenges in biofuels production from lignocellulosic biomass is the generation of high glucose titers from cellulose in the enzymatic hydrolysis stage of pretreated biomass to guarantee a cost-effective process. Therefore, the enzymatic saccharification on cellulose at high solid loading is an alternative. In this work, the agave bagasse was hydrothermally pretreated and optimized at 194°C/30min, obtaining a pretreated solid rich in cellulose content (>46.46%), and subjected to enzymatic hydrolysis at high solid levels. A horizontal bioreactor was designed for enzyme saccharification at high solid loadings [25% (w/v)]. The bioreactor improved mixing efficiency, with cellulose conversions up to 98% (195.6g/L at 72h). Moreover, mathematical modeling of cellulase deactivation demonstrated that cellulases lose most of their initial activity in the first hours of the reaction. Also, cellulose was characterized by X-ray diffraction, and the pretreated solids were visualized using scanning electron microscopy.This project was funded by the Secretary of Public Education of Mexico - Mexican Science and Technology Council (SEP-CONACYT) with the Basic Science Project-2015-01 (Ref. 254808). Marcela Sofía Pino also thanks the National Council for Science and Technology (CONACYT, Mexico) for her Master Fellowship support (grant number: 611312/452636), and Dr. Michele Michelin thanks the Portuguese Foundation for Science and Technology (FCT) for her postdoctoral fellowship (SFRH/BPD/100786/2014).info:eu-repo/semantics/publishedVersio

Multi-step approach to add value to corncob: production of biomass-degrading enzymes, lignin and fermentable sugars

This work presents an integrated and multi-step approach for the recovery and/or application of the lignocellulosic fractions from corncob in the production of high value added compounds as xylo-oligosaccharides, enzymes, fermentable sugars, and lignin in terms of biorefinery concept. For that, liquid hot water followed by enzymatic hydrolysis were used. Liquid hot water was performed using different residence times (1050 minutes) and holding temperature (180200 °C), corresponding to severities (log(R0)) of 3.364.64. The most severe conditions showed higher xylo-oligosaccharides extraction (maximum of 93%) into the hydrolysates and higher recovery of cellulose on pretreated solids (maximum of 65%). Subsequently, hydrolysates and solids were used in the production of xylanases and cellulases, respectively, as well as, pretreated solids were also subjected to enzymatic hydrolysis for the recovery of lignin and fermentable sugars from cellulose. Maximum glucose yield (100%) was achieved for solids pretreated at log(R0) of 4.42 and 5% solid loading.Michele Michelin is a recipient of a FCT fellowship (SFRH/BPD/ 100786/2014). ThisstudywassupportedbythePortugueseFoundation for Science and Technology (FCT) under the scope of the strategic funding of UID/BIO/04469/2013 unit and COMPETE 2020 (POCI-010145-FEDER-006684) and BioTecNorte operation (NORTE-01-0145FEDER-000004) funded by the European Regional Development Fund under the scope of Norte2020 – Programa Operacional Regional do Norte. Héctor Ruiz would like to thank the financial support to the Mexican Science and Technology Council (CONACYT, Mexico) for the Basic Science Project-2015-01 (Ref. 254808) and the Energy Sustainability Fund 2014-05 (CONACYT-SENER), Mexican Centre for Innovation in Bioenergy (Cemie-Bio), and Cluster of Bioalcohols (Ref. 249564). We thank Dr. Nelson Lima from MUM (Micoteca da Universidade do Minho, PT) that gently provided the Trichoderma reesei fungi.info:eu-repo/semantics/publishedVersio

Phoretic flow induced by asymmetric confinement

Internal phoretic flows due to the interactions of solid boundaries with local chemical gradients may be created using chemical patterning. Alternatively, we demonstrate here that internal flows might also be induced by geometric asymmetries of chemically homogeneous surfaces. We characterise the circulatory flow created in a cavity enclosed between two eccentric cylindrical walls of uniform chemical activity. Local gradients of the diffusing solute induce a slip flow along the surface of the cylinders, leading to a circulatory bulk flow pattern which can be solved analytically in the diffusive limit. The flow strength can be controlled by adjusting the relative positions of the cylinders, and an optimal configuration is identified. These results provide a model system for tunable phoretic pumps.This work was funded in part by a David Crighton Fellowship at the University of Cambridge (ML), a Mobility Plus Fellowship from the Polish Ministry of Science and Higher Education (ML), the EU through a Marie-Curie CIG grant (EL) and the French Ministry of Defense DGA (SM).This is the author accepted manuscript. The final version is available from Cambridge University Press via http://dx.doi.org/10.1017/jfm.2016.40

Carboxymethyl cellulose-based films: Effect of organosolv lignin incorporation on physicochemical and antioxidant properties

Organosolv lignin was incorporated in carboxymethyl cellulose (CMC)-based films as a reinforcing and bioactive agent. Films were produced by the casting method using compatible and environmentally friendly solvents. The incorporation of lignin in CMC-based films was evaluated in term of morphology, physicochemical, barrier, mechanical and antioxidant properties. Solubility tests showed that lignin improved the water resistance of the films for approx. 60%. This behavior was also observed for the water vapor permeability, achieving a 20% reduction. Morphological characteristics suggested low compatibility between organosolv lignin and CMC matrix, revealed by the small aggregates homogeneously distributed in the film, through scanning electron microscopy, related to the self-assembly behavior of lignin. CMC/lignin-based films also presented higher thermal stability. Fourier transform infrared spectroscopy showed that incorporation of lignin led to small changes in the film's structure. Finally, organosolv lignin proved to be a promising material for the development of active CMC-based films due to its demonstrated antioxidant activity that can be useful to pack food products that suffer from undesirable oxidation reactions.This study was supported by the Portuguese Foundation for Science and Technology (FCT) under the scope of the strategic funding of UIDB/04469/2020 unit and BioTecNorte operation (NORTE-01-0145-FEDER000004) funded by the European Regional Development Fund under the scope of Norte2020 - Programa Operacional Regional do Norte.info:eu-repo/semantics/publishedVersio

Lignin recovery from a mixture of SIX lignocellulosic biomasses within a biorefinery scheme based on a sequential process of autohydrolysis and organosolv

A mixture of six lignocellulosic biomasses could be a solution for sustainable biorefinery supply throughout the year compared with seasonal feedstock. In this study, a sequential process of autohydrolysis and organosolv was used for this mixture. To optimize lignin extraction, an experimental design was used to study the impacts of temperature, ethanol concentration, and time on lignin yield and related characteristics of the organosolv process. A highly pure organosolv lignin (OL) (ca. 90% Klason lignin) was recovered. FTIR analysis showed the main lignin structure was almost unchanged. NMR confirmed this and revealed the presence of guaiacyl-syringyl type with small amounts of p-hydroxyphenyl units (25% G, 70% S, and 5% H), predominantly presenting -O-4 units (ca. 80%). Tg from 73 to 85 °C was detected. OL showed radical scavenging activity as high as the commercial antioxidant BHT. Moreover, enzymatic susceptibility of delignified biomass was accessed, in which 50% glucose yield was achieved.This study was supported by the Portuguese Foundation for Science and Technology (FCT) under the scope of the strategic funding of UIDB/04469/2020 unit and Centre Bio R&D Unit (UIDB/05083/2020 and UIDP/05083/2020), and by LABBELS – Associate Laboratory in Biotechnology, Bioengineering and Microelectromechanical Systems, LA/P/0029/2020. Centre CQUM (UIDB/00686/2020), and National NMR Network (RNRMN) (PINFRA/22161/2016) and Project Excelencia ED431F 2022/09 k251 (program funded by FEDER and Xunta de Galicia). Rita Pontes (SFRH/BDE/10916/2015) thank FCT for their doctoral felowship. Aloia Romaní acknowledges the Ministry of Science and Innovation (MICIN) through the grant RYC2020-030690-I.info:eu-repo/semantics/publishedVersio

Enzymatic hydrolysis of hidrothermally pretreated agave bagasse

info:eu-repo/semantics/publishedVersio

Effect of One Year of Cryopreservation on the Activity of Lysosomal Hydrolases from EBV-Transformed Lymphocytes

Background. The Epstein-Barr virus (EBV) was used as an agent of B lymphocyte proliferation for subsequent diagnosis of lysosomal storage disease. Due to the constant handling of long-preserved samples in our cell bank, we decided to observe the behavior and then compare cultured and frozen samples for at least one year's cryopreservation. Methods. Twenty-five samples from healthy individuals were used to assess the possible changes in activity of enzymes β-galactosidase, β-glucosidase, α-iduronidase, α-galactosidase, and α-glucosidase. Transmission electron microscopy was used to confirm cell transformation of B lymphocytes into EBV-infected cells, generating lymphoblastoid cell lines. Results. Transmission electron microscopy findings confirmed previous reports in the literature that is, significant and evident morphological changes in the nucleus occur after day 12 and the consequent cell transformation into EBV-infected cells. After thawing and subsequent treatment with the five enzymes utilized, we observed no significant changes in samples cryopreserved for more than one year, as compared to samples cultured for 12 days

Biogas production through co-digestion of enzymatically pretreated corn bran and cow manure

Biogas production from wastes is an alternative that contributes positively to the environment and minimize the dependence on fossil energy sources. Additionally, the reuse of biomasses helps to reduce the waste production, but a pretreatment is required to use it in the anaerobic digestion. Here biogas was produced through co-digestion of enzymatically pretreated corn bran and cow manure. Firstly, it was selected the most hydrolysable waste (barley bagasse, sugar cane bagasse, elephant grass, thick orange pie, average orange pie, wheat bran, coffee grounds, orange peel, white sludge, vinasse, corn bran, soy bran, soy peel, cotton bran, cassava husk, cassava flour, banana peel, corn bran, sorghum stem, sorghum seed, total sorghum and wet distiller grain) by the crude extracts containing amylase (secreted by Aspergillus brasiliensis), xylanase (Aspergillus tamarii Kita) and cellulase (Trichoderma reesei, Novozymes®). Later on, different mixtures of these enzymes were studied using simplex-centroid designs. The most hydrolyzed waste by each enzyme individually (measured by reducing sugar using dinitrosalicylic acid, DNS) at 50°C, 120 rpm and 24 h were corn bran, banana peel and sorghum seed. Then, the simplex-centroid designs resulted in model equations and respective response surface contours. Amylase extract had a significant positive influence on corn bran hydrolysis by maximizing the reducing sugar yield when it was used individually (35g/L of reducing sugar). After it, the pretreated corn bran and a cow manure (1:2 g of volatile solids) were employed for biogas production in batch assays. It was found a biogas accumulation of 326 mL in the 12nd day of anaerobic codigestion, which were similar to the control (containing 35 g/L of glucose alone) and 53% higher than that found with corn bran without enzymatic pretreatment. In conclusion, it was observed that the crude extract optimized for amylase production affected significantly the corn bran hydrolyses and consequently the biogas production in a co-digestion with cow manure.CNPq (Conselho Nacional de Desenvolvimento Científico e Tecnológico process 142139/2017-3)FAPESP (Fundação de Amparo à Pesquisa do Estado de São Paulo process 2018/07522-6)FCT (Fundação para a Ciência e Tecnologia)info:eu-repo/semantics/publishedVersio