The Peculiar Behavior of Halo Coronal Mass Ejections in Solar Cycle 24

We report on a remarkable finding that the halo coronal mass ejections (CMEs) in cycle 24 are more abundant than in cycle 23, although the sunspot number in cycle 24 has dropped by about 40%. We also find that the distribution of halo-CME source locations is different in cycle 24: the longitude distribution of halos is much flatter with the number of halos originating at central meridian distance >/=60 degrees twice as large as that in cycle 23. On the other hand, the average speed and the associated soft X-ray flare size are the same in the two cycles, suggesting that the ambient medium into which the CMEs are ejected is significantly different. We suggest that both the higher abundance and larger central meridian longitudes of halo CMEs can be explained as a consequence of the diminished total pressure in the heliosphere in cycle 24 (Gopalswamy et al. 2014). The reduced total pressure allows CMEs expand more than usual making them appear as halos.Comment: 12 pages, 5 figures, accepted for publication in the Astrophysical Journal Letters, April 7, 201

Characteristics of events with metric-to-decahectometric type II radio bursts associated with CMEs and flares in relation to SEP events

A gradual solar energetic particle (SEP) event is thought to happen when particles are accelerated at a shock due to a fast coronal mass ejection (CME). To quantify what kind of solar eruptions can result in such SEP events, we have conducted detailed investigations on the characteristics of CMEs, solar flares and m-to-DH wavelength type II radio bursts (herein after m-to-DH type II bursts) for SEP-associated and non-SEP-associated events, observed during the period of 1997-2012. Interestingly, 65% of m-to-DH type II bursts associated with CMEs and flares produced SEP events. The SEP-associated CMEs have higher sky-plane mean speed, projection corrected speed, and sky-plane peak speed than those of non-SEP-associated CMEs respectively by 30%, 39%, and 25%, even though the two sets of CMEs achieved their sky-plane peak speeds at nearly similar heights within LASCO field of view. We found Pearson's correlation coefficients between the speeds of CMEs speeds and logarithmic peak intensity of SEP events are cc = 0.62 and cc = 0.58, respectively. We also found that the SEP-associated CMEs are on average of three times more decelerated (-21.52 m/s2) than the non-SEP-associated CMEs (-5.63 m/s2). The SEP-associated m type II bursts have higher frequency drift rate and associated shock speed than those of the non-SEP-associated events by 70% and 25% respectively. The average formation heights of m and DH type II radio bursts for SEP-associated events are lower than for non-SEP-associated events. 93% of SEP-associated events originate from the western hemisphere and 65% of SEP-associated events are associated with interacting CMEs. The obtained results indicate that, at least for the set of CMEs associated with m-to-DH type II bursts, SEP-associated CMEs are more energetic than those not associated with SEPs, thus suggesting that they are effective particle accelerators.Comment: 19 pages, 10 figures, 3 tables, accepted for publication by ApS

Effects of No-Pest Strip Insecticide

Effects of No-Pest Strip Insecticid

Space Weather Application Using Projected Velocity Asymmetry of Halo CMEs

Halo coronal mass ejections (HCMEs) originating from regions close to the center of the Sun are likely to be responsible for severe geomagnetic storms. It is important to predict geo-effectiveness of HCMEs using observations when they are still near the Sun. Unfortunately, coronagraphic observations do not provide true speeds of CMEs due to the projection effects. In the present paper, we present a new technique allowing estimate the space speed and approximate source location using projected speeds measured at different position angles for a given HCME (velocity asymmetry). We apply this technique to HCMEs observed during 2001-2002 and find that the improved speeds are better correlated with the travel times of HCMEs to Earth and with the magnitudes ensuing geomagnetic storms.Comment: accepted for [publication in Solar Physic

Statistical Analysis of Periodic Oscillations in LASCO Coronal Mass Ejection Speeds

A large set of coronal mass ejections (CMEs, 3463) has been selected to study their periodic oscillations in speed in the Solar and Heliospheric Observatory (SOHO) missions Large Angle and Spectrometric Coronagraph (LASCO) field of view. These events, reported in the SOHOLASCO catalog in the period of time 19962004, were selected based on having at least 11 height-time measurements. This selection criterion allows us to construct at least ten-point speed distance profiles and evaluate kinematic properties of CMEs with a reasonable accuracy. To identify quasi-periodic oscillations in the speed of the CMEs a sinusoidal function was fitted to speed distance profiles and the speed time profiles. Of the considered events 22 revealed periodic velocity fluctuations. These speed oscillations have on average amplitude equal to 87 kms(exp -1) and period 7.8R /241 min (in distance-time). The study shows that speed oscillations are a common phenomenon associated with CME propagation implying that all the CMEs have a similar magnetic flux-rope structure. The nature of oscillations can be explained in terms of magnetohydrodynamic (MHD) waves excited during the eruption process. More accurate detection of these modes could, in the future, enable us to characterize magnetic structures in space (space seismology)

Spatial Relationship between Solar Flares and Coronal Mass Ejections

We report on the spatial relationship between solar flares and coronal mass ejections (CMEs) observed during 1996-2005 inclusive. We identified 496 flare-CME pairs considering limb flares (distance from central meridian > 45 deg) with soft X-ray flare size > C3 level. The CMEs were detected by the Large Angle and Spectrometric Coronagraph (LASCO) on board the Solar and Heliospheric Observatory (SOHO). We investigated the flare positions with respect to the CME span for the events with X-class, M-class, and C-class flares separately. It is found that the most frequent flare site is at the center of the CME span for all the three classes, but that frequency is different for the different classes. Many X-class flares often lie at the center of the associated CME, while C-class flares widely spread to the outside of the CME span. The former is different from previous studies, which concluded that no preferred flare site exists. We compared our result with the previous studies and conclude that the long-term LASCO observation enabled us to obtain the detailed spatial relation between flares and CMEs. Our finding calls for a closer flare-CME relationship and supports eruption models typified by the CSHKP magnetic reconnection model.Comment: 7 pages; 4 figures; Accepted by the Astrophysical Journa

Width of Radio-Loud and Radio-Quiet CMEs

In the present paper we report on the difference in angular sizes between radio-loud and radio-quiet CMEs. For this purpose we compiled these two samples of events using Wind/WAVES and SOHO/LASCO observations obtained during 1996-2005. It is shown that the radio-loud CMEs are almost two times wider than the radio-quiet CMEs (considering expanding parts of CMEs). Furthermore we show that the radio-quiet CMEs have a narrow expanding bright part with a large extended diffusive structure. These results were obtained by measuring the CME widths in three different ways.Comment: Solar Physic, in pres

Prediction Space Weather Using an Asymmetric Cone Model for Halo CMEs

Halo coronal mass ejections (HCMEs) are responsible of the most severe geomagnetic storms. A prediction of their geoeffectiveness and travel time to Earth's vicinity is crucial to forecast space weather. Unfortunately coronagraphic observations are subjected to projection effects and do not provide true characteristics of CMEs. Recently, Michalek (2006, {\it Solar Phys.}, {\bf237}, 101) developed an asymmetric cone model to obtain the space speed, width and source location of HCMEs. We applied this technique to obtain the parameters of all front-sided HCMEs observed by the SOHO/LASCO experiment during a period from the beginning of 2001 until the end of 2002 (solar cycle 23). These parameters were applied for the space weather forecast. Our study determined that the space speeds are strongly correlated with the travel times of HCMEs within Earth's vicinity and with the magnitudes related to geomagnetic disturbances

Automated condition monitoring of mill ball size distribution and grate open area

Grinding media in coarse grinding tumbling mills constitute the biggest consumable cost to a comminution processing plant, therefore it is critically important to minimize associated wear. Secondly, efficient grinding is dependent on tight control of the desired ball size distribution, or else optimum impact breakage cannot be assured. Despite the significance of minitoring ball size distribution for mill operation, no practically deployable systems are currently in industry use to measure it. This paper describes a new method for highly accurate, comprehensive, and rapid determination of ball size distribution.Accurate SAG and AG mill product size control is dependent on appropriate Grate Open Area dimensions. Wear of the grate hole edges or in the plate thickness results in an increase of the open area due to the tapered hole cross section, which can result in oversize product exiting the mill. Conversely, some grate castings feature peening of the edges during mill operation, thereby decreasing open area, and therefore preventing the desireed top size product from exiting the mill.SAG mill throughput requires grate holes to remain open or else throughput is restricted. Many grates in operation are pegged by grinding media to varying degrees of severity. This paper introduces a comprehensive, accurate and rapid method to measure and track the size and pegging status of each and all grate holes in situ, and therefore provides tracking information on the Open Area of a SAG mill. This enables operators to control the primary mill product size and therefore the opportunity to stabilize downstream processes