Process for preparation of large-particle-size monodisperse latexes

Monodisperse latexes having a particle size in the range of 2 to 40 microns are prepared by seeded emulsion polymerization in microgravity. A reaction mixture containing smaller monodisperse latex seed particles, predetermined amounts of monomer, emulsifier, initiator, inhibitor and water is placed in a microgravity environment, and polymerization is initiated by heating. The reaction is allowed to continue until the seed particles grow to a predetermined size, and the resulting enlarged particles are then recovered. A plurality of particle-growing steps can be used to reach larger sizes within the stated range, with enlarge particles from the previous steps being used as seed particles for the succeeding steps. Microgravity enables preparation of particles in the stated size range by avoiding gravity related problems of creaming and settling, and flocculation induced by mechanical shear that have precluded their preparation in a normal gravity environment

Cfd investigation of spacer-filled channels for membrane distillation

The membrane distillation (MD) process for water desalination is affected by temperature polarization, which reduces the driving force and the efficiency of the process. To counteract this phenomenon, spacer-filled channels are used, which enhance mixing and heat transfer but also cause higher pressure drops. Therefore, in the design of MD modules, the choice of the spacer is crucial for process efficiency. In the present work, different overlapped spacers are investigated by computational fluid dynamics (CFD) and results are compared with experiments carried out with thermochromic liquid crystals (TLC). Results are reported for different flow attack angles and for Reynolds numbers (Re) ranging from ~200 to ~800. A good qualitative agreement between simulations and experiments can be observed for the areal distribution of the normalized heat transfer coefficient. Trends of the average heat transfer coefficient are reported as functions of Re for the geometries investigated, thus providing the basis for CFD-based correlations to be used in higher-scale process models

Fluid-structure interaction and flow redistribution in membrane-bounded channels

The hydrodynamics of electrodialysis and reverse electrodialysis is commonly studied by neglecting membrane deformation caused by transmembrane pressure (TMP). However, large frictional pressure drops and differences in fluid velocity or physical properties in adjacent channels may lead to significant TMP values. In previous works, we conducted one-way coupled structural-CFD simulations at the scale of one periodic unit of a profiled membrane/channel assembly and computed its deformation and frictional characteristics as functions of TMP. In this work, a novel fluid-structure interaction model is presented, which predicts, at the channel pair scale, the changes in flow distribution associated with membrane deformations. The continuity and Darcy equations are solved in two adjacent channels by treating them as porous media and using the previous CFD results to express their hydraulic permeability as a function of the local TMP. Results are presented for square stacks of 0.6-m sides in cross and counter flow at superficial velocities of 1 to 10 cm/s. At low velocities, the corresponding low TMP does not significantly affect the flow distribution. As the velocity increases, the larger membrane deformation causes significant fluid redistribution. In the cross flow, the departure of the local superficial velocity from a mean value of 10 cm/s ranges between -27% and +39%

The first products made in space: Monodisperse latex particles

The preparation of large particle size 3 to 30 micrometer monodisperse latexes in space confirmed that original rationale unequivocally. The flight polymerizations formed negligible amounts of coagulum as compared to increasing amounts for the ground-based polymerizations. The number of offsize large particles in the flight latexes was smaller than in the ground-based latexes. The particle size distribution broadened and more larger offsize particles were formed when the polymerizations of the partially converted STS-4 latexes were completed on Earth. Polymerization in space also showed other unanticipated advantages. The flight latexes had narrower particle size distributions than the ground-based latexes. The particles of the flight latexes were more perfect spheres than those of the ground-based latexes. The superior uniformity of the flight latexes was confirmed by the National Bureau of Standards acceptance of the 10 micrometer STS-6 latex and the 30 micrometer STS-11 latexes as Standard Reference Materials, the first products made in space for sale on Earth. The polymerization rates in space were the same as those on Earth within experimental error. Further development of the ground-based polymerization recipes gave monodisperse particles as large as 100 micrometer with tolerable levels of coagulum, but their uniformity was significantly poorer than the flight latexes. Careful control of the polymerization parameters gave uniform nonspherical particles: symmetrical and asymmetrical doublets, ellipsoids, egg-shaped, ice cream cone-shaped, and popcorn-shaped particles

Synthesis of 5-substituted 7,9-dihydro-8H-[1,3]dioxolo[4,5-h][2,3]benzodiazepin-8-ones as anticonvulsant agents

n/

Magnesium Hydroxide Nanoparticles Production from Natural Bitterns

Magnesium hydroxide nanoparticles are widely employed in numerous industrial applications. Several preparation methods have been proposed using mainly synthetic Mg2+ containing solutions. In the present work, the possibility of producing Mg(OH)2 nanoparticles from real bitterns, the by-product of sea salt production, is investigated. Bitterns are highly concentrated Mg2+ containing solutions whose exploitation can turn a waste into valuable products embracing the circular economy idea. Two bitterns collected from Galia and Margi saltworks of the district of Trapani (Italy) were studied. Galia and Margi bitterns had a 1 M and 2.5 M Mg2+ concentration, respectively. A 2 mm diameter circular-cross sectional T-mixer was adopted to ensure fast reactant mixing. NaOH solutions were employed as precipitant agents. Mg(OH)2 nanoparticles characterized by cationic and mass purity higher than 99 % and 90 %, respectively, were successfully produced when treating Galia bitterns, while the excessive Margi Mg2+ concentration yielded stronger micrometer Mg(OH)2 agglomerates

Prolonged heavy rainfall and land use drive catchment sediment source dynamics: appraisal using multiple biotracers

Excessive sediment loss degrades freshwater quality and is prone to further elevation and variable source contributions due to the combined effect of extreme rainfall and differing land uses. To quantify erosion and sediment source responses across scales, this study integrated work at both field and catchment scale for two hydrologically contrasting winters (2018-19 and 2019-20). Sediment load was estimated at the field scale (grassland-arable conversion system). Sediment source apportionment work was undertaken at the catchment scale (4.5 km2) and used alkanes, and both free and bound fatty acid carbon isotope signatures as diagnostic fingerprints to distinguish sediment sources: arable, pasture, woodland and stream banks. Sediment source apportionment based on bound fatty acids revealed a substantial shift in contributions, from stream banks dominating (70 ± 5%) in winter 2018-19, to arable land dominating (52 ± 7%) in the extreme wet winter 2019-20. Increases in sediment contributions from arable (~3.9 times) and pasture (~2.4 times) land at the catchment outlet during the winter 2019-20 were consistent with elevated sediment losses monitored at the field scale which indicated that low-magnitude high frequency rainfall alone increased sediment loss even from pasture by 350%. In contrast, carbon isotope signatures of alkanes and free fatty acids consistently estimated stream banks as a dominant source (i.e., ~36 % and ~70 % respectively) for both winters regardless of prolonged rainfall in winter 2019-20. Beyond quantifying the shifts in field scale sediment load and catchment scale sediment sources due to the changes in rainfall patterns, our results demonstrate valuable insight into how the fate of biotracers in soil and sediment manifests in the δ13C values of homologues and, in turn, their role in information gain for estimating sediment source contributions. Discrepancies in the estimated sediment source contributions using different biotracers indicate that without a careful appreciation of their biogeochemical limitations, erroneous interpretation of sediment source contributions can undermine management strategies for delivering more sustainable and resilient agriculture

Experimental assessment of the mixing quality in a circular cross-sectional t-shaped mixer for the precipitation of sparingly soluble compounds

Precipitation processes have been successfully proved to be a feasible route to extract high-value products from wastes. However, reactive crystallization is characterized by fast kinetics, especially when highly concentrated solutions are used or sparingly soluble compounds precipitate, thus requiring a fast mixing of the reactants. In this context, T-shaped mixers have been extensively investigated both experimentally and numerically as a mean to achieve a rapid reactants homogenization. Many research efforts have been focused on the analysis of rectangular cross-sectional T-shaped mixers, while less attention has been devoted to the study of circular cross-sectional ones. In the present work, mixing times in a 3 mm circular cross-sectional T-shaped mixer have been optically estimated by exploiting the extremely fast neutralization reaction between sodium hydroxide and hydrochloric acid solutions. Reynolds numbers ranging between 1,000 and 6,000 were investigated. Mixing phenomena were (i) captured by detecting the colour change of a pH indicator by means of a high frame rate camera and (ii) quantified by a suitable image analysis technique. The assessed mixing times were found in accordance with available data in the literature