4,427 research outputs found
A "MINLP" Formulation for Optimal Design of a Catalytic Distillation Column Based on a Generic Non Equilibrium Model
This contribution proposes a Mixed Integer Non Linear Programming (MINLP) formulation for optimal design of a catalytic distillation column based on a generic nonequilibrium model (NEQ). The solution strategy for the global optimization combines Simulated Annealing (SA) and Sequential Quadratic Programming (SQP) in order to
minimize the objective function. The solution of this MINLP problem yields the optimal values for the temperature, composition and flow rate profiles, tray geometry, column
diameter, reflux ratio, reboiler duty, feed tray location, number of trays and catalytic stage location. Hydraulic constraints (entrainment flooding, down-flow flooding,
weeping-dumpling) are also considered. For the example, the production of ETBE (Ethyl tert-butyl ether) is presented here
A model for pH determination during alcoholic fermentation of a grape must by Saccharomyces cerevisiae
A model to predict accurately pH evolution during alcoholic fermentation of must by Saccharomyces cerevisiae is proposed for the first time. The objective at least is to determine if the pH measurement could be used for predictive control. The inputs of the model are: the temperature, the concentrations in sugars, ethanol, nitrogen compounds, mineral elements (magnesium, calcium, potassium and sodium) and main organic acids (malic acid, citric acid, acetic acid, lactic acid, succinic acid). In order to avoid uncertainties coming from the possible precipitation, we studied this opportunity on a grape must without any tartaric acid, known as forming complexes with potassium and calcium during the fermentation. The model is based on thermodynamic equilibrium of electrolytic compounds in solution. The dissociation constants depend on the temperature and the alcoholic degree of the solution. The average activity coefficients are estimated by the Debbye–H¨uckel relation. A fictive diacid is introduced in the model to represent the unmeasured residual species. The molality of hydrogen ions and thus the pH are determined by solving a non-linear algebraic equations system consisted of mass balances, chemical equilibrium equations and electroneutrality principle. Simulation results showed a good capacity of the model to represent the pH evolution during fermentation
A stoichiometric reaction scheme for Saccharothrix algeriensis growth and thiolutin production
A new bacterial species, Saccharothrix algeriensis NRRL B-24137, was isolated in 1992 in the Sahara desert. This filamentous bacterium is able to produce dithiolopyrrolones, molecules presenting antibacterial, antifungal, and anticancer properties. In this study, a “reaction engineering” approach was adopted to gain more knowledge on the growth of Sa. algeriensis and its dithiolopyrrolone production on a semi-synthetic liquid medium. The objective is to establish a reaction scheme of the bacterium metabolism from extracellular experimental information, relatively easy to obtain. The approach enabled us to show that Sa. algeriensis could grow using several substrates that were sequentially consumed and that substrate limitation may induce a secondary metabolism in antibiotic production. From these qualitative data, a general reaction scheme was extracted consisting of four reactions: growth via amino acids, glucose consumption for maintenance, growth using glucose, and thiolutin production. The stoichiometric coefficients and the reaction extends were identified using a factorial analysis based on the bilinear structure of the component mass balances in a batch reactor. The analysis of the reaction stoichiometry enabled us to draw some conclusions concerning the substrate consumption pathway
Batch fermentation process: Modelling and direct sensitivity analysis
Based on a nonlinear model, this article realizes an investigation of dynamic behaviour of a batch fermentation process using direct sensitivity analysis (DSA). The used nonlinear mathematical model has a good qualitative and quantitative description of the alcoholic fermentation process. This model has been discussed and validated by authors in other studies. The DSA of dynamic model was used to calculate the matrix of the sensitivity functions in order to determine the influence of the small deviations of initial state, control inputs, and parameters from the ideal nominal values on the state trajectory and system output in time. Process optimization and advanced control strategies can be developed based on this work
An application of a cocitation-analysis method to find further research possibilities on the area of scheduling problems
In this article we will give firstly a classification scheme of scheduling problems and their solving methods. The main aspects under examination are the following: machine and secondary resources, constraints, objective functions, uncertainty, mathematical models and adapted solution methods. In a second part, based on this scheme, we will examine a corpus of 60 main articles (1015 citation links were recorded in total) in scheduling literature from 1977 to 2009. The main purpose is to discover the underlying themes within the literature and to examine how they have evolved. To identify documents likely to be closely related, we are going to use the cocitation-based method of Greene et al. (2008). Our aim is to build a base of articles in order to extract the much developed research themes and find the less examined ones as well, and then try to discuss the reasons of the poorly investigation of some areas
Infinite/infinite analysis as a tool for an early oriented synthesis of a reactive pressure swing distillation
The study contributes to the characterization of an original reactive pressure swing distillation system. The methyl acetate (MeAc) transesterification with ethanol (EtOH) to produce methanol (MeOH) and ethyl acetate (EtAc) is shown as illustrative example. The streams outside the units are evaluated by the ∞/∞ analysis to provide insights on the process behavior. Two simpler systems with recycling stream are also presented.The ∞/∞ analysis allows checking the interrelation of the system streams without any column design consideration. Unfeasible regions, low limit values, multiplicity regions, discontinuities, control difficulties, recommendable operation conditions and column profile combinations are predicted and discussed. All these information are useful to establish an early and suitable system design strategy
On the study of catalytic membrane reactor for water detritiation: Membrane characterization.
Tritium waste recycling is a real economic and ecological issue. Generally under the non-valuable Q2Oform (Q = H, D or T), waste can be converted into fuel Q2for a fusion machine (e.g. JET, ITER) by isotopeexchange reaction Q2O + H2= H2O + Q2. Such a reaction is carried out over Ni-based catalyst bed packed ina thin wall hydrogen permselective membrane tube. This catalytic membrane reactor can achieve higherconversion ratios than conventional fixed bed reactors by selective removal of reaction product Q2bythe membrane according to Le Chatelier’s Law. This paper presents some preliminary permeation tests performed on a catalytic membrane reactor.Permeabilities of pure hydrogen and deuterium as well as those of binary mixtures of hydrogen, deu-terium and nitrogen have been estimated by measuring permeation fluxes at temperatures ranging from573 to 673 K, and pressure differences up to 1.5 bar. Pure component global fluxes were linked to perme-ation coefficient by means of Sieverts’ law. The thin membrane (150 �m), made of Pd–Ag alloy (23 wt.%Ag),showed good permeability and infinite selectivity toward protium and deuterium. Lower permeabilityvalues were obtained with mixtures containing non permeable gases highlighting the existence of gasphase resistance. The sensitivity of this concentration polarization phenomenon to the composition andthe flow rate of the inlet was evaluated and fitted by a two-dimensional model
Identification of a rice drying model with an improved sequential optimal design of experiments
Getting relevant parameter estimation of a non-linear model is often a hard task from both an experimental and numerical point of view. The objective of optimally designed experiments procedure is to diminish the experimental effort needed such that the identification is within acceptable confidence ranges. After each experiment, the next experiment is optimally designed, taking into account all past experimental results. It allows quality information to be extracted from the experimental data with less experimental time and resource consumption.
In this paper, we present an original approach and implementation of the classical A-, D- and Eoptimality
on the estimation of 5 unknown (transfer related) coefficients in a compartmental model used
to describe the convective drying of rice. The originality of our method is that it uses reparameterization
of both parameter and protocol vectors which permits to avoid using a global optimization algorithm. The
presented method is implemented in Matlab as a Toolbox and fully tested on a pilot plant. The case study
(drying of rice) is typical in the field of process engineering: the dynamic model is strongly non-linear in
its parameters and cannot be analytically solved. In addition, the specific technical constrains (inertias,
limits, etc.) on the pilot are explicitly taken into account for improved experimental feasibility.
In this drying application, three experiments with non-constant drying conditions are shown to be
quite as effective as a two-factor three-level grid of nine experiments at constant conditions, with only
one third of the experimental effort
Phase reconstruction of strong-field excited systems by transient-absorption spectroscopy
We study the evolution of a V-type three-level system, whose two resonances
are coherently excited and coupled by two ultrashort laser pump and probe
pulses, separated by a varying time delay. We relate the quantum dynamics of
the excited multi-level system to the absorption spectrum of the transmitted
probe pulse. In particular, by analyzing the quantum evolution of the system,
we interpret how atomic phases are differently encoded in the
time-delay-dependent spectral absorption profiles when the pump pulse either
precedes or follows the probe pulse. We experimentally apply this scheme to
atomic Rb, whose fine-structure-split 5s\,^2S_{1/2}\rightarrow 5p\,^2P_{1/2}
and 5s\,^2S_{1/2}\rightarrow 5p\,^2P_{3/2} transitions are driven by the
combined action of a pump pulse of variable intensity and a delayed probe
pulse. The provided understanding of the relationship between quantum phases
and absorption spectra represents an important step towards full time-dependent
phase reconstruction (quantum holography) of bound-state wave-packets in
strong-field light-matter interactions with atoms, molecules and solids.Comment: 5 pages, 4 figure
Phase equilibria of aqueous solutions of formaldehyde and methanol: Improved approach using UNIQUAC coupled to chemical equilibria
The study of the phase equilibria involving formaldehyde is still relevant because of its presence in new processes where biomass is the raw material. The coupling between physical phase equilibria and chemical reactions makes its thermodynamic description a challenging task. In this work, an improved approach using UNIQUAC coupled to chemical equilibria was developed and compared with experimental data from the literature. The first application was done for the phase equilibria of the formaldehyde–water system and distribution of oligomers in the liquid phase was computed. The second and the third applications respectively considered the phase equilibria of the formaldehyde–methanol system and the formaldehyde–water–methanol system
- …