1,361 research outputs found
Blending of nanoscale and microscale in uniform large-area sculptured thin-film architectures
The combination of large thickness ( m), large--area uniformity (75
mm diameter), high growth rate (up to 0.4 m/min) in assemblies of
complex--shaped nanowires on lithographically defined patterns has been
achieved for the first time. The nanoscale and the microscale have thus been
blended together in sculptured thin films with transverse architectures.
SiO () nanowires were grown by electron--beam evaporation onto
silicon substrates both with and without photoresist lines (1--D arrays) and
checkerboard (2--D arrays) patterns. Atomic self--shadowing due to
oblique--angle deposition enables the nanowires to grow continuously, to change
direction abruptly, and to maintain constant cross--sectional diameter. The
selective growth of nanowire assemblies on the top surfaces of both 1--D and
2--D arrays can be understood and predicted using simple geometrical shadowing
equations.Comment: 17 pages, 9 figure
Cosmological implications of the KATRIN experiment
The upcoming Karlsruhe Tritium Neutrino (KATRIN) experiment will put
unprecedented constraints on the absolute mass of the electron neutrino,
\mnue. In this paper we investigate how this information on \mnue will
affect our constraints on cosmological parameters. We consider two scenarios;
one where \mnue=0 (i.e., no detection by KATRIN), and one where
\mnue=0.3eV. We find that the constraints on \mnue from KATRIN will affect
estimates of some important cosmological parameters significantly. For example,
the significance of and the inferred value of depend
on the results from the KATRIN experiment.Comment: 13 page
Development of integrated ecological standards of sustainable forest management at an operational scale
Within Canada, and internationally, an increasing demand that forests be managed to maintain all resources has led to the development of criteria and indicators of sustainable forest management. There is, however, a lack of understanding, at an operational scale, how to evaluate and compare forest management activities to ensure the sustainability of all resources. For example, nationally, many of the existing indicators are too broad to be used directly at a local scale of forest management; provincially, regulations are often too prescriptive and rigid to allow for adaptive management; and forest certification programs, often based largely on public or stake-holder opinion instead of scientific understanding, may be too local in nature to permit a comparison of operations across a biome. At an operational scale indicators must be relevant to forest activities and ecologically integrated. In order to aid decision-makers in the adaptive management necessary for sustainable forest management, two types of indicators are identified: those that are prescriptive to aid in planning forest management and those that are evaluative to be used in monitoring and suggesting improvements. An integrated approach to developing standards based on an ecosystem management paradigm is outlined for the boreal forest where the variability inherent in natural systems is used to define the limits within which forest management is ecologically sustainable. Sustainability thresholds are thus defined by ecosystem response after natural disturbances. For this exercise, standards are proposed for biodiversity, forest productivity via regeneration, soil conservation and aquatic resources. For each of these standards, planning indicators are developed for managing forest conditions while forest values are evaluated by environmental indicators, thus leading to a continuous cycle of improvement. Approaches to developing critical thresholds and corresponding prescriptions are also outlined. In all cases, the scale of evaluation is clearly related to the landscape (or FMU) level while the stand level is used for measurement purposes. In this view the forest should be managed as a whole even though forest interventions are usually undertaken at the stand level
Matter-gravity couplings and Lorentz violation
The gravitational couplings of matter are studied in the presence of Lorentz
and CPT violation. At leading order in the coefficients for Lorentz violation,
the relativistic quantum hamiltonian is derived from the gravitationally
coupled minimal Standard-Model Extension. For spin-independent effects, the
nonrelativistic quantum hamiltonian and the classical dynamics for test and
source bodies are obtained. A systematic perturbative method is developed to
treat small metric and coefficient fluctuations about a Lorentz-violating and
Minkowski background. The post-newtonian metric and the trajectory of a test
body freely falling under gravity in the presence of Lorentz violation are
established. An illustrative example is presented for a bumblebee model. The
general methodology is used to identify observable signals of Lorentz and CPT
violation in a variety of gravitational experiments and observations, including
gravimeter measurements, laboratory and satellite tests of the weak equivalence
principle, antimatter studies, solar-system observations, and investigations of
the gravitational properties of light. Numerous sensitivities to coefficients
for Lorentz violation can be achieved in existing or near-future experiments at
the level of parts in 10^3 down to parts in 10^{15}. Certain coefficients are
uniquely detectable in gravitational searches and remain unmeasured to date.Comment: 59 pages two-column REVTe
Bounds on Lorentz and CPT Violation from the Earth-Ionosphere Cavity
Electromagnetic resonant cavities form the basis of many tests of Lorentz
invariance involving photons. The effects of some forms of Lorentz violation
scale with cavity size. We investigate possible signals of violations in the
naturally occurring resonances formed in the Earth-ionosphere cavity.
Comparison with observed resonances places the first terrestrial constraints on
coefficients associated with dimension-three Lorentz-violating operators at the
level of 10^{-20} GeV.Comment: 8 pages REVTe
Electrodynamics with Lorentz-violating operators of arbitrary dimension
The behavior of photons in the presence of Lorentz and CPT violation is
studied. Allowing for operators of arbitrary mass dimension, we classify all
gauge-invariant Lorentz- and CPT-violating terms in the quadratic Lagrange
density associated with the effective photon propagator. The covariant
dispersion relation is obtained, and conditions for birefringence are
discussed. We provide a complete characterization of the coefficients for
Lorentz violation for all mass dimensions via a decomposition using
spin-weighted spherical harmonics. The resulting nine independent sets of
spherical coefficients control birefringence, dispersion, and anisotropy. We
discuss the restriction of the general theory to various special models,
including among others the minimal Standard-Model Extension, the isotropic
limit, the case of vacuum propagation, the nonbirefringent limit, and the
vacuum-orthogonal model. The transformation of the spherical coefficients for
Lorentz violation between the laboratory frame and the standard Sun-centered
frame is provided. We apply the results to various astrophysical observations
and laboratory experiments. Astrophysical searches of relevance include studies
of birefringence and of dispersion. We use polarimetric and dispersive data
from gamma-ray bursts to set constraints on coefficients for Lorentz violation
involving operators of dimensions four through nine, and we describe the mixing
of polarizations induced by Lorentz and CPT violation in the cosmic-microwave
background. Laboratory searches of interest include cavity experiments. We
present the theory for searches with cavities, derive the experiment-dependent
factors for coefficients in the vacuum-orthogonal model, and predict the
corresponding frequency shift for a circular-cylindrical cavity.Comment: 58 pages two-column REVTeX, accepted in Physical Review
Does shade improve light interception efficiency? A comparison among seedlings from shade-tolerant and -intolerant temperate deciduous tree species
• Here, we tested two hypotheses: shading increases light interception efficiency (LIE) of broadleaved tree seedlings, and shade-tolerant species exhibit larger LIEs than do shade-intolerant ones. The impact of seedling size was taken into account to detect potential size-independent effects on LIE. LIE was defined as the ratio of mean light intercepted by leaves to light intercepted by a horizontal surface of equal area. • Seedlings from five species differing in shade tolerance (Acer saccharum, Betula alleghaniensis, A. pseudoplatanus, B. pendula, Fagus sylvatica) were grown under neutral shading nets providing 36, 16 and 4% of external irradiance. Seedlings (1- and 2-year-old) were three-dimensionally digitized, allowing calculation of LIE. • Shading induced dramatic reduction in total leaf area, which was lowest in shade-tolerant species in all irradiance regimes. Irradiance reduced LIE through increasing leaf overlap with increasing leaf area. There was very little evidence of significant size-independent plasticity of LIE. • No relationship was found between the known shade tolerance of species and LIE at equivalent size and irradiance
Modelling silvicultural alternatives for conifer regeneration in boreal mixedwood stands (aspen/white spruce/balsam fir)
We model and compare the biological and financial constraints of four prescriptions that serve as alternatives to conventional clearcutting followed by planting in eastern and western boreal mixedwood stands. These alternative prescriptions for full or partial conifer stocking are (1) reliance on advance regeneration with or without augmentation by fill-planting; (2) understory scarification during a mast year; (3) direct seeding either aerially or with a scarifier-seeder; and (4) underplanting. Our main conclusions concerning the biological constraints are that (1) advance regeneration, mainly of balsam fir in the east and white spruce in the west, requires >26 000 and > 4000 trees/ha (because of different distributions), respectively, to achieve full conifer stocking; (2) reliance on a mast year requires at least 6 m2/ha of mature conifer basal area, but much less if some advance regeneration is present or only moderate stocking is desired; (3) aerial seeding with 35% scarification requires about a half-million seeds/ha to achieve full conifer stocking, while a scarifier-seeder would require only a third of this application rate; and (4) underplanting is constrained to aspen stands with >25% incident light at planting height. In all cases, alternative prescriptions become more feasible if only moderate or minimal stocking is the silvicultural objective. A costing exercise for the four prescriptions in comparison with a clearcut followed by planting shows that reliance on advance regeneration or understory planting are the cheapest alternatives to achieve full or partial conifer stocking. With the exception of full conifer stocking in situations where there is little advance regeneration (and where herbicides can be used), conventional plantations are never the cheapest approach. In such cases, fill planting and use of a scarifier-seeder become viable options. Aerial seeding and reliance on a mast year are the most expensive of the alternatives. We conclude, tentatively, that there is enough conifer basal area in most of the eastern boreal mixedwood of Canada to allow for the use of either or both a mast year and advance regeneration to achieve full or partial conifer stocking. By contrast, in the west conifer basal area will seldom be sufficient for natural seeding, and the density of advance regeneration is likewise often too low. Finally, because of light constraints, understory planting appears to have a much wider applicability in the west than in the east
A toolkit modeling approach for sustainable forest management planning: Achieving balance between science and local needs
To assist forest managers in balancing an increasing diversity of resource objectives, we developed a toolkit modeling approach for sustainable forest management (SFM). The approach inserts a meta-modeling strategy into a collaborative modeling framework grounded in adaptive management philosophy that facilitates participation among stakeholders, decision makers, and local domain experts in the meta-model building process. The modeling team works iteratively with each of these groups to define osential questions, identify data resources, and then determine whether available tools can be applied or adapted, or whether new tools can be rapidly created to fit the need. The desired goal of the process is a linked series of domain-specific models (tools) that balances generalized "top-down" models (i.e., scientific models developed without input from the local system) with case-specific customized "bottom-up" models that are driven primarily by local needs. Information flow between models is organized according to vertical (i.e., between scale) and horizontal (i.e., within scale) dimensions. We illustrate our approach within a 2.1 million hectare forest planning district in central Labrador, a forested landscape where social hnd ecological values receive a higher priority than economic values. However, the focus of this paper is on the process of how SFM modeling tools and concepts can be rapidly assembled and applied in new locations, balancing efficient transfer of science with adaptation to local needs. We use the Labrador case study to illustrate strengths and challenges uniquely associated with a meta-modeling approach to integrated modeling as it fits within the broader collaborative modeling framework. Principle advantages of the approach include the scientific rigor introduced by peer-reviewed models, combined with the adaptability of meta-modeling. A key challenge is the limited transparency of scientific models to different participatory groups. This challenge can be overcome by frequent and substantive two-way communication among different groups at appropriate times in the model-building process, combined with strong leadership that includes strategic choices when assembling the modeling team. The toolkit approach holds promise for extending beyond case studies, without compromising the bottom-up flow of needs and information, to inform SFM planning using the best available science
- …