301 research outputs found
Inverse Low Gain Avalanche Detectors (iLGADs) for precise tracking and timing applications
Low Gain Avalanche Detector (LGAD) is the baseline sensing technology of the
recently proposed Minimum Ionizing Particle (MIP) end-cap timing detectors
(MTD) at the Atlas and CMS experiments. The current MTD sensor is designed as a
multi-pad matrix detector delivering a poor position resolution, due to the
relatively large pad area, around 1 ; and a good timing resolution,
around 20-30 ps. Besides, in his current technological incarnation, the timing
resolution of the MTD LGAD sensors is severely degraded once the MIP particle
hits the inter-pad region since the signal amplification is missing for this
region. This limitation is named as the LGAD fill-factor problem. To overcome
the fill factor problem and the poor position resolution of the MTD LGAD
sensors, a p-in-p LGAD (iLGAD) was introduced. Contrary to the conventional
LGAD, the iLGAD has a non-segmented deep p-well (the multiplication layer).
Therefore, iLGADs should ideally present a constant gain value over all the
sensitive region of the device without gain drops between the signal collecting
electrodes; in other words, iLGADs should have a 100 fill-factor by
design. In this paper, tracking and timing performance of the first iLGAD
prototypes is presented.Comment: Conference Proceedings of VCI2019, 15th Vienna Conference of
Instrumentation, February 18-22, 2019, Vienna, Austri
Ion-sensitive field-effect transistors fabricated in a commercial CMOS technology’,
Abstract: The fabrication of pH-sensitive ISFET devices in an unmodified two-metal commercial CMOS technology (1.0 m from Atmel-ES2) is reported. The ISFET devices have a gate structure compatible with the CMOS process, with an electrically floating electrode consisting on polysilicon plus the two metals. The passivation oxynitride layer acts as the pH-sensitive material in contact with the liquid solution. The devices have shown good operating characteristics, with a 47 mV/pH response. The use of a commercial CMOS process allows the straightforward integration of signal-processing circuitry. An ISFET amplifier circuit has been integrated with the ISFET sensors
Recent Technological Developments on LGAD and iLGAD Detectors for Tracking and Timing Applications
This paper reports the last technological development on the Low Gain
Avalanche Detector (LGAD) and introduces a new architecture of these detectors
called inverse-LGAD (iLGAD). Both approaches are based on the standard
Avalanche Photo Diodes (APD) concept, commonly used in optical and X-ray
detection applications, including an internal multiplication of the charge
generated by radiation. The multiplication is inherent to the basic n++-p+-p
structure, where the doping profile of the p+ layer is optimized to achieve
high field and high impact ionization at the junction. The LGAD structures are
optimized for applications such as tracking or timing detectors for high energy
physics experiments or medical applications where time resolution lower than 30
ps is required. Detailed TCAD device simulations together with the electrical
and charge collection measurements are presented through this work.Comment: Keywords: silicon detectors, avalanche multiplication, timing
detectors, tracking detectors. 8 pages. 8 Figure
Conserved Mechanisms of Tumorigenesis in the Drosophila Adult Midgut
<div><p>Whereas the series of genetic events leading to colorectal cancer (CRC) have been well established, the precise functions that these alterations play in tumor progression and how they disrupt intestinal homeostasis remain poorly characterized. Activation of the Wnt/Wg signaling pathway by a mutation in the gene APC is the most common trigger for CRC, inducing benign lesions that progress to carcinomas due to the accumulation of other genetic alterations. Among those, Ras mutations drive tumour progression in CRC, as well as in most epithelial cancers. As mammalian and <i>Drosophila</i>'s intestines share many similarities, we decided to explore the alterations induced in the <i>Drosophila</i> midgut by the combined activation of the Wnt signaling pathway with gain of function of Ras signaling in the intestinal stem cells. Here we show that compound Apc-Ras clones, but not clones bearing the individual mutations, expand as aggressive intestinal tumor-like outgrowths. These lesions reproduce many of the human CRC hallmarks such as increased proliferation, blockade of cell differentiation and cell polarity and disrupted organ architecture. This process is followed by expression of tumoral markers present in human lesions. Finally, a metabolic behavioral assay shows that these flies suffer a progressive deterioration in intestinal homeostasis, providing a simple readout that could be used in screens for tumor modifiers or therapeutic compounds. Taken together, our results illustrate the conservation of the mechanisms of CRC tumorigenesis in <i>Drosophila</i>, providing an excellent model system to unravel the events that, upon mutation in Apc and Ras, lead to CRC initiation and progression.</p></div
Role of Phytochelatins in Redox Caused Stress in Plants and Animals
Varied environmental compartments (such as soil and water) potentially contaminated with different metals/metalloids can impact the health of both plants and animals/humans. Trace amounts of Cu, Mn, Mo, Ni and Zn are beneficial for higher plants, whereas, Cr, Cu, Co, Mn, Mo, Se, V and Zn are known as the micronutrient metal/metalloids for animals/humans. However, elevated levels of the metals/metalloids can cause severe toxic consequences in both plants and animals/humans. Common in plants and animals/humans, phytochelatins (PCs), the principal non-protein, S-rich, thiolate peptides, protect (through different mechanisms) cellular functions and metal/metalloid homeostasis by performing their chelation and/or detoxification. With the major aim of broadening the current knowledge on the subject, this chapter (a) overviews PCs’ role and modulation separately in metal/metalloid-exposed plants and animals/humans; (b) discusses major methods for determination of PCs and bioassays for enzymes involved in PC synthesis; (c) evaluates the connection of PCs with bionanoparticles; and finally (d) highlights so far unexplored aspects in the present context
Gain and time resolution of 45 m thin Low Gain Avalanche Detectors before and after irradiation up to a fluence of n/cm
Low Gain Avalanche Detectors (LGADs) are silicon sensors with a built-in
charge multiplication layer providing a gain of typically 10 to 50. Due to the
combination of high signal-to-noise ratio and short rise time, thin LGADs
provide good time resolutions.
LGADs with an active thickness of about 45 m were produced at CNM
Barcelona. Their gains and time resolutions were studied in beam tests for two
different multiplication layer implantation doses, as well as before and after
irradiation with neutrons up to n/cm.
The gain showed the expected decrease at a fixed voltage for a lower initial
implantation dose, as well as for a higher fluence due to effective acceptor
removal in the multiplication layer. Time resolutions below 30 ps were obtained
at the highest applied voltages for both implantation doses before irradiation.
Also after an intermediate fluence of n/cm, similar
values were measured since a higher applicable reverse bias voltage could
recover most of the pre-irradiation gain. At n/cm, the
time resolution at the maximum applicable voltage of 620 V during the beam test
was measured to be 57 ps since the voltage stability was not good enough to
compensate for the gain layer loss. The time resolutions were found to follow
approximately a universal function of gain for all implantation doses and
fluences.Comment: 17 page
Radiation Hardness of Thin Low Gain Avalanche Detectors
Low Gain Avalanche Detectors (LGAD) are based on a n++-p+-p-p++ structure
where an appropriate doping of the multiplication layer (p+) leads to high
enough electric fields for impact ionization. Gain factors of few tens in
charge significantly improve the resolution of timing measurements,
particularly for thin detectors, where the timing performance was shown to be
limited by Landau fluctuations. The main obstacle for their operation is the
decrease of gain with irradiation, attributed to effective acceptor removal in
the gain layer. Sets of thin sensors were produced by two different producers
on different substrates, with different gain layer doping profiles and
thicknesses (45, 50 and 80 um). Their performance in terms of gain/collected
charge and leakage current was compared before and after irradiation with
neutrons and pions up to the equivalent fluences of 5e15 cm-2. Transient
Current Technique and charge collection measurements with LHC speed electronics
were employed to characterize the detectors. The thin LGAD sensors were shown
to perform much better than sensors of standard thickness (~300 um) and offer
larger charge collection with respect to detectors without gain layer for
fluences <2e15 cm-2. Larger initial gain prolongs the beneficial performance of
LGADs. Pions were found to be more damaging than neutrons at the same
equivalent fluence, while no significant difference was found between different
producers. At very high fluences and bias voltages the gain appears due to deep
acceptors in the bulk, hence also in thin standard detectors
Ion-sensitive field-effect transistors fabricated in a commercial CMOS technology
The fabrication of pH-sensitive ISFET devices in an unmodified two-metal commercial CMOS technology (1.0 um from Atmel-ES2) is reported. The ISFET devices have a gate structure compatible with the CMOS process, with an electrically floating electrode
consisting on polysilicon plus the two metals. The passivation oxynitride layer acts as the pH-sensitive material in contact with the liquid solution. The devices have shown
good operating characteristics, with a 47 mV/pH response. The use of a commercial
CMOS process allows the straightforward integration of signal-processing circuitry. An ISFET amplifier circuit has been integrated with the ISFET sensors.Peer reviewe
Defense Related Phytohormones Regulation in Arbuscular Mycorrhizal Symbioses Depends on the Partner Genotypes
A Practical Score for Prediction of Outcome After Cerebral Venous Thrombosis
Background: Most patients with cerebral venous thrombosis (CVT) have independent survival in the short term. However, identification of high-risk individuals with an unfavorable outcome is a challenging task. We aimed to develop a CVT grading scale (CVT-GS) to aid in the short-term clinical decision-making.Methods: We included 467 consecutive patients with CVT who were hospitalized from 1981 to 2015 in two third-level referral hospitals. Factors associated with 30-day mortality were selected with bivariate analyses to integrate a Cox proportional-hazards model to determine components of the final scoring. After the scale was configured, the prognostic performance was tested for prediction of short-term death or moderately impaired to death [modified Rankin scale (mRS) > 2]. CVT-GS was categorized as mild, moderate or severe for the prediction of 30-day fatality rate and a probability of mRS > 2.Results: The 30-day case fatality rate was 9.0%. The CVT-GS (0–13 points; more points predicting poorer outcomes) was composed of parenchymal lesion size > 6 cm (3 points), bilateral Babinski signs (3 points), male sex (2 points), parenchymal hemorrhage (2 points), and level of consciousness (coma: 3 points, stupor: 2, somnolence: 1, and alert: 0). CVT was categorized as mild (0–2 points, 0.4% fatality rate), moderate (3–7 points, 9.9% fatality rate), or severe (8–13 points, 61.4% fatality rate). The CVT-GS had an accuracy of 91.6% for the prediction of 30-day mortality and 85.3% for mRS > 2.Conclusions: CVT-GS is a practical clinical tool for prediction of outcome after CVT. This score may aid in clinical decision-making and could serve to stratify patients enrolled in clinical trials
- …