Bioinformatics-Based Identification of Potential Hypoxia-Related Genes Associated With Peyronie’s Disease

Hypoxia is one of the most important predisposing conditions for Peyronie’s disease (PD) and the pathogenetic mechanism is yet to be completely elucidated. This study applied bioinformatic approaches to select candidate hypoxia-related genes involved in the pathogenesis of PD. The Gene Expression Omnibus (GEO) data set GSE146500 was introduced to compare the transcriptional profiling between normal and PD samples. The differential expression of hypoxia-related gene was determined with R software. On the selected candidate genes, further functional analyses were applied, including protein–protein interactions (PPIs), gene correlation, gene ontology (GO), and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway. A total of 66 candidate genes (24 candidates overexpressed in PD and 42 showing reduced expression in PD) were distinguished according to the differential expression between human fibroblast cells from normal and PD patients. The interactions among these candidate genes were recognized according to PPI analysis. The functional enrichment analyses revealed the potential modulatory functions of the candidate genes in some major biological processes, especially in glycolysis/gluconeogenesis and carbon metabolism. The findings would facilitate further study on the pathogenesis of PD, which might consequently promote the improvement of clinical strategies against PD

A current review of dose-escalated radiotherapy in locally advanced non-small cell lung cancer

The mainstay therapy for locally advanced non-small cell lung cancer is concurrent chemoradiotherapy. Loco-regional recurrence constitutes the predominant failure patterns. Previous studies confirmed the relationship between increased biological equivalent doses and improved overall survival. However, the large randomized phase III study, RTOG 0617, failed to demonstrate the benefit of dose-escalation to 74 Gy compared with 60 Gy by simply increasing fraction numbers

Analysis of calibration schemes for HEPS sextupole

BackgroundSextupoles are an important component of storage ring octonal unit in high energy synchrotron radiation sources. They require complex technological processes and precise center extraction. Therefore, it is necessary to find out the most reasonable calibration scheme for the mechanical center.PurposeThis study aims at the calibration scheme for the mechanical center extraction of high energy photon Ssurce (HEPS) sextupoles, and obtaining the corrected mechanical central coordinate system.MethodsThe method of directly measuring the reference plane of the sextupole was adopted for the mechanical center calibration of magnets. By rotating the conventional calibration coordinate system with a given pole seam deviation angle, the three polar seam surfaces were brought closer to the theoretical positions to decrease the main diagonal component of the sextupoles. The mechanical center calibrations were performed twice for each hexacode iron to further reduce the impact of the polar seam error.ResultsThe calibration results show that the calibration repeat accuracy is 0.005 mm for the sextupole. The standard deviation between the measured value and the design value of the pole seam spacing is 0.015 mm. Additionally, the standard deviation of the reference point before and after the rotation of the coordinate system is 0.09 mm, with a maximum rotation angle of 0.6 mrad.ConclusionsThe calibration scheme of this study can be used to improve the calibration accuracy and provide reference for the calibration of similar equipment. It ensures smooth installation of accelerator devices and is of significant importance for accelerator collimation measurements

CEPC Conceptual Design Report: Volume 2 - Physics & Detector

The Circular Electron Positron Collider (CEPC) is a large international scientific facility proposed by the Chinese particle physics community to explore the Higgs boson and provide critical tests of the underlying fundamental physics principles of the Standard Model that might reveal new physics. The CEPC, to be hosted in China in a circular underground tunnel of approximately 100 km in circumference, is designed to operate as a Higgs factory producing electron-positron collisions with a center-of-mass energy of 240 GeV. The collider will also operate at around 91.2 GeV, as a Z factory, and at the WW production threshold (around 160 GeV). The CEPC will produce close to one trillion Z bosons, 100 million W bosons and over one million Higgs bosons. The vast amount of bottom quarks, charm quarks and tau-leptons produced in the decays of the Z bosons also makes the CEPC an effective B-factory and tau-charm factory. The CEPC will have two interaction points where two large detectors will be located. This document is the second volume of the CEPC Conceptual Design Report (CDR). It presents the physics case for the CEPC, describes conceptual designs of possible detectors and their technological options, highlights the expected detector and physics performance, and discusses future plans for detector R&D and physics investigations. The final CEPC detectors will be proposed and built by international collaborations but they are likely to be composed of the detector technologies included in the conceptual designs described in this document. A separate volume, Volume I, recently released, describes the design of the CEPC accelerator complex, its associated civil engineering, and strategic alternative scenarios

CEPC Conceptual Design Report: Volume 2 - Physics & Detector

The Circular Electron Positron Collider (CEPC) is a large international scientific facility proposed by the Chinese particle physics community to explore the Higgs boson and provide critical tests of the underlying fundamental physics principles of the Standard Model that might reveal new physics. The CEPC, to be hosted in China in a circular underground tunnel of approximately 100 km in circumference, is designed to operate as a Higgs factory producing electron-positron collisions with a center-of-mass energy of 240 GeV. The collider will also operate at around 91.2 GeV, as a Z factory, and at the WW production threshold (around 160 GeV). The CEPC will produce close to one trillion Z bosons, 100 million W bosons and over one million Higgs bosons. The vast amount of bottom quarks, charm quarks and tau-leptons produced in the decays of the Z bosons also makes the CEPC an effective B-factory and tau-charm factory. The CEPC will have two interaction points where two large detectors will be located. This document is the second volume of the CEPC Conceptual Design Report (CDR). It presents the physics case for the CEPC, describes conceptual designs of possible detectors and their technological options, highlights the expected detector and physics performance, and discusses future plans for detector R&D and physics investigations. The final CEPC detectors will be proposed and built by international collaborations but they are likely to be composed of the detector technologies included in the conceptual designs described in this document. A separate volume, Volume I, recently released, describes the design of the CEPC accelerator complex, its associated civil engineering, and strategic alternative scenarios

CEPC Conceptual Design Report: Volume 2 - Physics & Detector

The Circular Electron Positron Collider (CEPC) is a large international scientific facility proposed by the Chinese particle physics community to explore the Higgs boson and provide critical tests of the underlying fundamental physics principles of the Standard Model that might reveal new physics. The CEPC, to be hosted in China in a circular underground tunnel of approximately 100 km in circumference, is designed to operate as a Higgs factory producing electron-positron collisions with a center-of-mass energy of 240 GeV. The collider will also operate at around 91.2 GeV, as a Z factory, and at the WW production threshold (around 160 GeV). The CEPC will produce close to one trillion Z bosons, 100 million W bosons and over one million Higgs bosons. The vast amount of bottom quarks, charm quarks and tau-leptons produced in the decays of the Z bosons also makes the CEPC an effective B-factory and tau-charm factory. The CEPC will have two interaction points where two large detectors will be located. This document is the second volume of the CEPC Conceptual Design Report (CDR). It presents the physics case for the CEPC, describes conceptual designs of possible detectors and their technological options, highlights the expected detector and physics performance, and discusses future plans for detector R&D and physics investigations. The final CEPC detectors will be proposed and built by international collaborations but they are likely to be composed of the detector technologies included in the conceptual designs described in this document. A separate volume, Volume I, recently released, describes the design of the CEPC accelerator complex, its associated civil engineering, and strategic alternative scenarios

CEPC Technical Design Report -- Accelerator

International audienceThe Circular Electron Positron Collider (CEPC) is a large scientific project initiated and hosted by China, fostered through extensive collaboration with international partners. The complex comprises four accelerators: a 30 GeV Linac, a 1.1 GeV Damping Ring, a Booster capable of achieving energies up to 180 GeV, and a Collider operating at varying energy modes (Z, W, H, and ttbar). The Linac and Damping Ring are situated on the surface, while the Booster and Collider are housed in a 100 km circumference underground tunnel, strategically accommodating future expansion with provisions for a Super Proton Proton Collider (SPPC). The CEPC primarily serves as a Higgs factory. In its baseline design with synchrotron radiation (SR) power of 30 MW per beam, it can achieve a luminosity of 5e34 /cm^2/s^1, resulting in an integrated luminosity of 13 /ab for two interaction points over a decade, producing 2.6 million Higgs bosons. Increasing the SR power to 50 MW per beam expands the CEPC's capability to generate 4.3 million Higgs bosons, facilitating precise measurements of Higgs coupling at sub-percent levels, exceeding the precision expected from the HL-LHC by an order of magnitude. This Technical Design Report (TDR) follows the Preliminary Conceptual Design Report (Pre-CDR, 2015) and the Conceptual Design Report (CDR, 2018), comprehensively detailing the machine's layout and performance, physical design and analysis, technical systems design, R&D and prototyping efforts, and associated civil engineering aspects. Additionally, it includes a cost estimate and a preliminary construction timeline, establishing a framework for forthcoming engineering design phase and site selection procedures. Construction is anticipated to begin around 2027-2028, pending government approval, with an estimated duration of 8 years. The commencement of experiments could potentially initiate in the mid-2030s

CEPC Technical Design Report -- Accelerator

International audienceThe Circular Electron Positron Collider (CEPC) is a large scientific project initiated and hosted by China, fostered through extensive collaboration with international partners. The complex comprises four accelerators: a 30 GeV Linac, a 1.1 GeV Damping Ring, a Booster capable of achieving energies up to 180 GeV, and a Collider operating at varying energy modes (Z, W, H, and ttbar). The Linac and Damping Ring are situated on the surface, while the Booster and Collider are housed in a 100 km circumference underground tunnel, strategically accommodating future expansion with provisions for a Super Proton Proton Collider (SPPC). The CEPC primarily serves as a Higgs factory. In its baseline design with synchrotron radiation (SR) power of 30 MW per beam, it can achieve a luminosity of 5e34 /cm^2/s^1, resulting in an integrated luminosity of 13 /ab for two interaction points over a decade, producing 2.6 million Higgs bosons. Increasing the SR power to 50 MW per beam expands the CEPC's capability to generate 4.3 million Higgs bosons, facilitating precise measurements of Higgs coupling at sub-percent levels, exceeding the precision expected from the HL-LHC by an order of magnitude. This Technical Design Report (TDR) follows the Preliminary Conceptual Design Report (Pre-CDR, 2015) and the Conceptual Design Report (CDR, 2018), comprehensively detailing the machine's layout and performance, physical design and analysis, technical systems design, R&D and prototyping efforts, and associated civil engineering aspects. Additionally, it includes a cost estimate and a preliminary construction timeline, establishing a framework for forthcoming engineering design phase and site selection procedures. Construction is anticipated to begin around 2027-2028, pending government approval, with an estimated duration of 8 years. The commencement of experiments could potentially initiate in the mid-2030s