1,154 research outputs found
DEAN: A program for dynamic engine analysis
The Dynamic Engine Analysis program, DEAN, is a FORTRAN code implemented on the IBM/370 mainframe at NASA Lewis Research Center for digital simulation of turbofan engine dynamics. DEAN is an interactive program which allows the user to simulate engine subsystems as well as a full engine systems with relative ease. The nonlinear first order ordinary differential equations which define the engine model may be solved by one of four integration schemes, a second order Runge-Kutta, a fourth order Runge-Kutta, an Adams Predictor-Corrector, or Gear's method for still systems. The numerical data generated by the model equations are displayed at specified intervals between which the user may choose to modify various parameters affecting the model equations and transient execution. Following the transient run, versatile graphics capabilities allow close examination of the data. DEAN's modeling procedure and capabilities are demonstrated by generating a model of simple compressor rig
A Sensor Failure Simulator for Control System Reliability Studies
A real-time Sensor Failure Simulator (SFS) was designed and assembled for the Advanced Detection, Isolation, and Accommodation (ADIA) program. Various designs were considered. The design chosen features an IBM-PC/XT. The PC is used to drive analog circuitry for simulating sensor failures in real-time. A user defined scenario describes the failure simulation for each of the five incoming sensor signals. Capabilities exist for editing, saving, and retrieving the failure scenarios. The SFS has been tested closed-loop with the Controls Interface and Monitoring (CIM) unit, the ADIA control, and a real-time F100 hybrid simulation. From a productivity viewpoint, the menu driven user interface has proven to be efficient and easy to use. From a real-time viewpoint, the software controlling the simulation loop executes at greater than 100 cycles/sec
Nonlinear dynamics of the interface of dielectric liquids in a strong electric field: Reduced equations of motion
The evolution of the interface between two ideal dielectric liquids in a
strong vertical electric field is studied. It is found that a particular flow
regime, for which the velocity potential and the electric field potential are
linearly dependent functions, is possible if the ratio of the permittivities of
liquids is inversely proportional to the ratio of their densities. The
corresponding reduced equations for interface motion are derived. In the limit
of small density ratio, these equations coincide with the well-known equations
describing the Laplacian growth.Comment: 10 page
Photostimulated Luminescence and Thermoluminescence of LSO Scintillators
Photostimulated luminescence (PSL) and thermoluminescence (TL) from five Lu_(2(1-x/)Ce)_(2x)/(SiO_4)O (LSO) crystals with different light outputs is reported. Optical irradiation into the Ce^(3+) absorption bands causes the appearance of a broad absorption band near 280 nn which is ascribed to Ce^(4+). In addition, a tail is observed extending beyond 700 nm. Optical irradiation into this tail (PSL) or heating of the crystal (TL) results in Ce^(3+) emission. It is shown that both PSL and TL are due to the same traps: In addition, an anti-correlation is found between the light output under gamma-ray irradiation and the trap concentration in the crystal. The nature of the recombination centers responsible for the low light output in some crystals is not clear. Annealing experiments suggest that the traps and the recombination centers may be related to oxygen vacancies
Application of Diagnostic Analysis Tools to the Ares I Thrust Vector Control System
The NASA Ares I Crew Launch Vehicle is being designed to support missions to the International Space Station (ISS), to the Moon, and beyond. The Ares I is undergoing design and development utilizing commercial-off-the-shelf tools and hardware when applicable, along with cutting edge launch technologies and state-of-the-art design and development. In support of the vehicle s design and development, the Ares Functional Fault Analysis group was tasked to develop an Ares Vehicle Diagnostic Model (AVDM) and to demonstrate the capability of that model to support failure-related analyses and design integration. One important component of the AVDM is the Upper Stage (US) Thrust Vector Control (TVC) diagnostic model-a representation of the failure space of the US TVC subsystem. This paper first presents an overview of the AVDM, its development approach, and the software used to implement the model and conduct diagnostic analysis. It then uses the US TVC diagnostic model to illustrate details of the development, implementation, analysis, and verification processes. Finally, the paper describes how the AVDM model can impact both design and ground operations, and how some of these impacts are being realized during discussions of US TVC diagnostic analyses with US TVC designers
Differences in decision-making behavior between elite and amateur team-handball players in a near-game test situation
Athletic features distinguishing experts from non-experts in team sports are relevant for performance analyses, talent identification and successful training. In this respect, perceptual-cognitive factors like decision making have been proposed to be important predictor of talent but, however, assessing decision making in team sports remains a challenging endeavor. In particular, it is now known that decisions expressed by verbal reports or micro-movements in the laboratory differ from those actually made in on-field situations in play. To address this point, our study compared elite and amateur players' decision-making behavior in a near-game test environment including sport-specific sensorimotor responses. Team-handball players (N = 44) were asked to respond as quickly as possible to representative, temporally occluded attack sequences in a team-handball specific defense environment on a contact plate system. Specifically, participants had to choose and perform the most appropriate out of four prespecified, defense response actions. The frequency of responses and decision time were used as dependent variables representing decision-making behavior. We found that elite players responded significantly more often with offensive responses (p < 0.05, odds ratios: 2.76-3.00) in left-handed attack sequences. Decision time decreased with increasing visual information, but no expertise effect was found. We suppose that expertise-related knowledge and processing of kinematic information led to distinct decision-making behavior between elite and amateur players, evoked in a domain-specific and near-game test setting. Results also indicate that the quality of a decision might be of higher relevance than the required time to decide. Findings illustrate application opportunities in the context of performance analyses and talent identification processes
Geometrical quadrupolar frustration in DyB
Physical properties of DyB have been studied by magnetization, specific
heat, and ultrasonic measurements. The magnetic entropy change and the
ultrasonic properties in the intermediate phase II indicate that the degeneracy
of internal degrees of freedom is not fully lifted in spite of the formation of
magnetic order. The ultrasonic attenuation and the huge softening of
in phase II suggests existence of electric-quadrupolar (orbital) fluctuations
of the 4-electron. These unusual properties originate from the geometrical
quadrupolar frustration.Comment: 4 pages, 4 figures, accepted for publication in Journal of the
Physical Society of Japa
Computational Methods for HSCT-Inlet Controls/CFD Interdisciplinary Research
A program aimed at facilitating the use of computational fluid dynamics (CFD) simulations by the controls discipline is presented. The objective is to reduce the development time and cost for propulsion system controls by using CFD simulations to obtain high-fidelity system models for control design and as numerical test beds for control system testing and validation. An interdisciplinary team has been formed to develop analytical and computational tools in three discipline areas: controls, CFD, and computational technology. The controls effort has focused on specifying requirements for an interface between the controls specialist and CFD simulations and a new method for extracting linear, reduced-order control models from CFD simulations. Existing CFD codes are being modified to permit time accurate execution and provide realistic boundary conditions for controls studies. Parallel processing and distributed computing techniques, along with existing system integration software, are being used to reduce CFD execution times and to support the development of an integrated analysis/design system. This paper describes: the initial application for the technology being developed, the high speed civil transport (HSCT) inlet control problem; activities being pursued in each discipline area; and a prototype analysis/design system in place for interactive operation and visualization of a time-accurate HSCT-inlet simulation
Interaction imaging with amplitude-dependence force spectroscopy
Knowledge of surface forces is the key to understanding a large number of
processes in fields ranging from physics to material science and biology. The
most common method to study surfaces is dynamic atomic force microscopy (AFM).
Dynamic AFM has been enormously successful in imaging surface topography, even
to atomic resolution, but the force between the AFM tip and the surface remains
unknown during imaging. Here, we present a new approach that combines high
accuracy force measurements and high resolution scanning. The method, called
amplitude-dependence force spectroscopy (ADFS) is based on the
amplitude-dependence of the cantilever's response near resonance and allows for
separate determination of both conservative and dissipative tip-surface
interactions. We use ADFS to quantitatively study and map the nano-mechanical
interaction between the AFM tip and heterogeneous polymer surfaces. ADFS is
compatible with commercial atomic force microscopes and we anticipate its
wide-spread use in taking AFM toward quantitative microscopy
- …